tayogo T03 User manual

Charging：
● Plugging the charging cable to the main player hole with USB
Port or 5V 1A USB adapter.
LED Indicator
Cable Plug Hole
（Please screw the cable tightly before diving)
LED Indicator
Controller LED: Full blue after connection, flash fast for pairing
Power LED: Full red during charging and no led after fully charging
( on the main player)
Problem and solution
Pairing fail: remove Gopro connection and try again
Power on fail: Check if the main player is charged; check if the
cable is well connected and try again.
Button not work: please check if the cable is well connected with
main player.
Matainance
Do not pull the stick back/forward strongly as the connection
cable is hidden inside. The stick will lose function if cable is broken.
After usage, please pull back the stick to the short length to keep
the inside cable good condition.
Please disconnect the main player and the controller if no use.
Please charge the main player first after long time no use.
Please screw the connection cable tightly into the main player
before diving, otherwise main player will be broken under water.
WIFI Pair
● Power both GoPro and Controller
● Go to GoPro Setting, Connect—Connect New Device—Smart
Remote to pair. Once connected, GoPro will show connected
and controller LED keep full blue.
Operatoin:
1.You can use the controller to control Gopro once connected.
2.Controller can power on/off GoPro
3.Shutter and Mode of the controller works same as GoPro buttons.
Other setting by touch screen need to be done before diving.
Note:：
1. Controller can connect with only 1 GoPro
2. If pairing failed, please power on again both GoPro and controller
to try again.
3. Please reset connections of GoPro to connect the new GoPro.
4.You can adjust the GoPro Adapter, or the main player adapter
to the right position or direction to shoot as you want.
5. Scroll left to pull up or down the stick, scroll right to lock.
LED Indicator Plug Hole

Selfie Stick with WIFI Remote Control
for GoPro
Instruction Manual
The package includes:
T03
Thanks for your purchase Tayogo Waterproof Selfie Stick with
WIFI Remote Control. It is designed to help your GoPro to shoot
or Selfie. You can use it when diving 30 meters underwater.
Selfie stick x1
Thumbscrew x2
GoPro mount adapter x1
Hanging rope x1
Charging Cable x1
Instruction Manual x1
Specification:
Compatible with GoPro Hero 4/5/6/7 (must have WIFI function)
Length: 29.5-92CM or 1 -3 Inch (extending)
Weight: 228g or 8Oz
Battery: 300mAH
Working time: up to 4 hours
Charging time: 1.5 hours
Note: Please turn off the selfie stick if you don't use as WIFI
consumes lot of power. Please charge fully before usage.
A. Product Diagram
B. Diagram for Controller
●Power
Press 1 second to power on.
Press 3 seconds to power off.
●Mode
Press to switch different camera mode
●Shutter
Press to take picture, or start/end video recording.
Operation
Install：
1.Install selfie stick
Refer to selfi stick diagram to install the main player to the stick
with thumbscrew and screw tightly the connection cable to the
hole of main player.
2. Install the mount adapter:
screw the adapter into the main player. Adjust the mount adapter
to the correct direction and use the adjustable nut to screw down
tightly.
Controller Plug
Hole for the Plug
Screw hole for the mount adapter
Main Player
Adapter to connect the main player
Extending Stick
Controller
Silicone Cover
Hanging Rope
to switch
camera mode
Power
LED indicator
Shutter
3. Install GoPro
Put GoPro into the diving case and connect by thumbscrew.
picture 1 picture 2 picture 3