TBI PRO Engineering TBI Bark V7 Pro User manual

Dual Vibration Bark Control Collar Manual
Vibration Mode
Press the power button
to get to Test Mode,
make sure the digit
shows 0 before test.
Sensor
Microphone
Bark,bark!
-This product is designed for no-pain correction with enhanced vibration and tone technology, which
helps to stop barking for small & medium dogs with NO SHOCK.
-This product is Vibration Bark Control Collar, the prongs cannot deliver shock.
-This product is NOT intended for use on dogs under 6 months old and less than 8 pounds.
-NOT for use with aggressive dogs. Use the product under supervision.
-For the comfort of your pet, please wear the Prong Covers to the prong before use.
-Avoid leaving the product on dog for more than 12 hours per day. Never connect a leash to the collar.
-Check the contact area daily for signs of rash or a sore. If a rash or sore is found, S TOP using the
product immediately until the skin heals.
-Wash the dog’s neck area and the prong covers and prongs weekly with a damp cloth.
-The product senses the dog’s high-frequency barking and other dog’s barking may have a very small
chance to activate the product. Decrease the sensitivity level when other dog’s nearby.
Blink in green,device is charging
Solid in green,device is fully charged
Solid in red,device is charged with improper charger
Description for Power Indicator
Notes: improper charger means chargers with output voltage over 5V.
Put the product on your dog.

Model: TBI Bark V7 Pro Version 1.0
Designed in Chicago,Made in P.R.C
Power on the device by
pressing and holding the
power button for 1 secod.
Mode indicator will display
green or red after device
powered on.
Press the M button to switch
Mode Indicator.
Green Mode Indicator means
Vibration Mode.
Red Mode indicator means
Strong Vibration Mode.
On Strong
Vibration
Mode
On Vibration
Mode
When device is powered on &
charged with improper charger,
power indicator will become
solid.
Mode Indicator Power Indicator Sensitivity Level
When device is powered off &
charged with improper charger,
power indicator remains off and
becomes solid when pressing
the power button.
Notes: Improper chargers
mean those with input voltage
over 5V.
6.Frequently Asked Questions & Answers
Q: Why doesn’t the product work when the dog barks?
A: Please first ensure to fit the product snugly, yet loose enough to allow one finger to fit
between the strap and your pet’s neck. Some dogs has weak barking, in this case you will need
to level up the sensitivity level. Thick coat on the neck area may also have small chance to
decrease the sensing from the barking, trim the coat near the area where you place the product.
Q:Why is the product triggered sometimes in a noisy environment though the dog isn’t barking?
A: Though we have optimized the barking detection to the best, some environment noises may
have similar frequency to barking, which may have small chance to activate the product. Please
lower the sensitivity level.
Q:Can I use the product when there are other dogs playing around?
A:Dogs will bark when playing and get excited, for the comfort and safety of your pet, we don’t
suggest using this product in such environment.
Q:How do I know if I can use this product for my pet?
A:The product is designed for healthy dogs over 6 months old, weighing no less than 8 pounds.
Most importantly, this product cannot be used on unhealthy or aggressive dogs, and if you are
unsure whether this product is appropriate for your pet, please consult your veterinarian or a
certified trainer.
Q:Can this product stop my dog’s howl?
A:No, this Bark Control Collar is designed to detect the barking only. It cannot detect or stop the
howling.
Q:Can I charge this product with any type of charger?
A:No, you are suggested to charge this product with charger of 5V output voltage, because
charger with output voltage of 9V or 12V may cause damage to the product. The product will
stop charging automatically if input voltage becomes too high and the power indicator turns red.
Q:Will my dog stop barking completely?
A:The Bark Control Collar effectively and humanely stops all barking when it is worn.
It should only be worn during periods of unwanted barking.
Q:Is the Bark Control Collar safe and humane?
A:Yes. The Bark Control Collar is designed to get your dog’s attention, not to punish him. This
product does not have the shock unit and it will only deliver tone and vibration correction.
However, the initial Strong Vibration Correction may startle your dog.
On Test Mode. Press the power button to get to Test Mode. Display
shows digit 0 when it is set on Test Mode, it will automatically display
digit 5 after the test completes or test is not conducted within 10
seconds.
If the FQ A cannot solve your problem or you need more help, please reach to
our Customer Service.
Vibration Mode
Strong Vibration Mode
The product will go to
next step if your dog
keeps barking within 1
minute.
Will automatically back
to Step 1 if the product
is not activated within 1
minute.