Petsafe PBC17-14779 User manual

PBC17-14779 / PBC19-14780
PBC17-14777 / PBC19-14778
Indoor Bark Control
Système de contrôle des
aboiements pour l’intérieur
Blafcontrole binnenshuis
Control de los ladridos para
uso en interiores
Dispositivo per il controllo
dell'abbaio per interni
Bellkontrolle für Innenräume
Please read this entire guide before beginning
Veuillez lire ce manuel en entier avant de commencer
Gelieve deze gids volledig door te lezen voordat u begint
Por favor, lea detenidamente este manual antes de empezar
Si prega di leggere attentamente la guida all’uso prima di utilizzare
Bitte lesen Sie die ganze Gebrauchsanleitung aufmerksam durch, ehe Sie beginnen
Operating Guide
Manuel d’utilisation
Gebruiksaanwijzing
Manual de funcionamiento
Guida all’uso
Gebrauchsanweisung

2 www.petsafe.net
ENES FRIT NLDE
IMPORTANT SAFETY INFORMATION
Explanation of Attention Words and Symbols used in this guide
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible
injury or death.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, could result in minor or moderate injury.
• Risk of explosion. Do not short circuit, mix old and new batteries, dispose of in fire,
or expose to water. When batteries are stored or disposed, they must be protected from
shorting. Dispose of used batteries properly.
• Not for use with aggressive dogs. Do not use this product if your dog is prone to
aggressive behaviour. Aggressive dogs can cause severe injury or death to their owners
and others. If you are not sure that this product is right for your dog, please talk to your
veterinarian or a certified trainer.

www.petsafe.net 3
DENL ITFR ESEN
• The PetSafe®Indoor Bark Control is not a toy. Keep away from the reach of
children. Use it only for its bark control purpose.
• This device is intended for use only with dogs. Never attempt to use it for any purpose not
described in this manual.
• All pets within hearing range will be affected by the ultrasonic tone.
• Most humans cannot hear the ultrasonic tone, however, precautions should be taken when
preparing the PetSafe®Indoor Bark Control for use.
• Humans should avoid standing very close to the Indoor Bark Control when it is on.
• For best results, use indoors only. Please visit our website or contact the Customer Care
Centre for information on PetSafe®Outdoor Bark Control products.

4 www.petsafe.net
ENES FRIT NLDE
Thank you for choosing the PetSafe®brand. You and your pet deserve a companionship that
includes memorable moments and a shared understanding together. Our products and training
tools enhance the relationship between pets and their owners. If you have any questions
about our products or training your pet, please visit our website at www.petsafe.net
or contact our Customer Care Centre. For a listing of Customer Care Centre
telephone numbers, visit our website at www.petsafe.net.
To get the most protection out of your warranty, please register your product within 30 days
at www.petsafe.net. By registering and keeping your receipt, you will enjoy the product’s
full warranty and should you ever need to call the Customer Care Centre, we will be able
to help you faster. Most importantly, your valuable information will never be given or sold
to anyone. Complete warranty information is available online at www.petsafe.net.

www.petsafe.net 5
DENL ITFR ESEN
Table of Contents
Components ....................................................................6
Features ........................................................................6
How It Works. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Key Definitions...................................................................7
To Insert and Remove the Batteries ..................................................8
Setup..........................................................................10
Using the Mounting Strip .........................................................10
What to Expect During Use of the Indoor Bark Control ................................11
Tips and Maintenance ...........................................................12
Frequently Asked Questions .............................................13
Battery Disposal ................................................................14
Important Recycling Advice .......................................................14
Compliance....................................................................15
Terms of Use and Limitation of Liability ..............................................16
Warranty ......................................................................18

6 www.petsafe.net
ENES FRIT NLDE
Components
3-Volt
Lithium
Batteries
(CR2032)
Self-Adhesive Hook & Loop
Mounting Strips
Operating Guide
PetSafe®
Indoor Bark Control Unit
Features
• Automatically deters excessive barking
• No collar needed
• Detects barks up to 8 metres away
• Low battery indicator
• Freestanding or can be adhered to door frames, window frames, etc.

www.petsafe.net 76 www.petsafe.net
DENL ITFR ESEN
How It Works
When the PetSafe®Indoor Bark Control is within range of a barking dog, an internal
microphone picks up the sound. The unit automatically emits an ultrasonic tone that can
be heard by dogs but is silent to most humans. Startled by the high-pitched tone, the dog
should stop barking. In time it will associate its bark with this unpleasant noise. When the
dog stops barking, the ultrasonic tone also stops. It is effective up to 8 metres. Note: If the
dog is deaf or hearing impaired, he may not react to the PetSafe®Indoor Bark Control.
Key Definitions
Microphone: Detects barking.
Two-Colour LED: Lights whenever the Indoor
Bark Control is activated. Also blinks to show
battery status.
On/Off Switch: Turns the Indoor Bark Control
on ( | ) and off ( O ).
Speaker: Produces the ultrasonic tone.
Battery Tray: Used to hold the 3-Volt lithium
CR2032 batteries.
Mounting Strip Area: Provision for wall
mounting with provided Mounting Strips.
On/Off Switch
Battery
Tray
Speaker
Two-Colour LED
BACK VIEW
Microphone
Mounting Strip Area

8 www.petsafe.net
ENES FRIT NLDE
To Insert and Remove the Batteries
Note: Do not install the batteries while the Indoor Bark
Control is turned on.
1. Holding the grooved edges, slide the Battery Tray out (A).
2. Install two (2), 3-Volt (CR2032) batteries positive (+) side
up (B).
3. Slide the Battery Tray back in place (C).
To Verify the Batteries are Inserted
Correctly
1. Slide the On/Off Switch to ( | ) ON (D).
2. The LED should flash green once and there will be an
audible beep. Then the LED will flash green once every 5
seconds (E).
3. If the LED does not flash, you may have inserted the
batteries backwards. Try taking them out and turning them
over, ensuring that the (+) side is up.
4. If the LED still does not flash, contact the Customer Care Centre.
Replacement batteries (3-Volt, CR2032) can be found at many retailers. Contact the
Customer Care Centre or visit our website at www.petsafe.net for a list of common retailers.
C
B
A
E
D

www.petsafe.net 98 www.petsafe.net
DENL ITFR ESEN
Risk of explosion if battery is replaced by an incorrect type. Do not
short circuit, mix old and new batteries, dispose of in fire, or expose to
water. When batteries are stored or disposed, they must be protected
from shorting. Dispose of used batteries properly.
Battery Life
Average battery life is 2 months, depending on how often your dog barks. However, due to
your dog’s learning process, your first batteries may not last as long as replacement batteries.
To conserve battery life, turn unit off when not in use.
Function and Response Table
Function LED Response
Unit is on
Green LED flashes once, followed by an audible beep,
then the green LED will flash once every 5 seconds
Emitting ultrasonic tone Red LED on
Low battery condition Red LED flashes 3 times every 5 seconds

10 www.petsafe.net
ENES FRIT NLDE
Setup
The Indoor Bark Control should be placed facing the dog and at a level equal to the dog’s
height to be most effective.
The unit includes provisions for hanging or can be adhered using the Self-Adhesive Hook and
Loop Mounting Strip. The Indoor Bark Control can also stand alone. For best results, the area
between the unit and your dog should be free of any large obstacles.
Using the Mounting Strip
1. The Indoor Bark Control includes a provision on the back to adhere the Mounting Strip.
2. Gently pull the two pieces of Mounting Strips apart.
3. Peel the tape from one side of the Mounting Strip and press firmly in place on the back of
the Indoor Bark Control.
4. When adhering to the wall, door frame, etc., clean and dry the surface before application.
5. Peel tape from the second side of the Mounting Strip and press firmly in place.
6. Simply press the two Mounting Strips together.
7. Adhesive reaches maximum strength after 24 hours.