Petsafe Happy Ride Specification sheet

BICYCLE BASKET
Four paws. Two wheels. Endless adventure.
Happy Ride™

What you have
What you need
4
x
2
x
4
x
4
x
2
x
4
x

1
Lift the two top flaps at either side of the basket. Insert the two side panels
with the hook and loop strips at the top, facing inside.

2
Insert the bottom panel under the attached safety tether. Fold the top flaps
down and press the hook and loop fasteners together.

3
Separate the upper and lower parts of each handlebar mount.

4
Insert each arm of the wire bracket into the groove on the back of each upper
handlebar mount. Rotate each upper mount until the wire stem snaps firmly into
the groove. (You’ll hear a loud snap.)

5
Separate the front plate from the adjustable brace. Position the plate in front
of the wire bracket and the brace behind the wire bracket and reconnect them
with the nut and bolt.

6
Hang the bracket on the handlebars. (Avoid pinching or bending your bicycle’s
brake cables.) Reconnect the upper and lower handlebar mounts. You have an
extra set of long bolts in case the original bolts are too short for your handlebars.

7
Slide the back pocket on the basket down onto the wire bracket. Check the
position and angle of the basket. The curved back portion of the brace should
rest firmly against your bicycle’s frame.