TBK vision RYK3B41 User manual

Waterproof Infrared
Illumination Camera
Instruction Manual
2005/06/30, VER.:1.0, NO.:040057/1

1
Thank you very much for purchasing our product. Before operating this
product, please read this instruction manual carefully to ensure proper use.
1. Safety Precautious
CAUTION
RISK OF ELECTRIC
SHOCK. DO NOT OPEN!
CAUTION : TO REDUCE THE RISK OF ELECTRIC
A
L SHOCK, DO NOT OPEN CO
V
ERS.
NO USER SER
V
ICE
A
BLE P
A
RTS INSIDE. REFER SER
V
ICING TO QU
A
LIFIED
SER
V
ICE PERSONNEL.
When in use, please avoid camera window directly contacting the eyes
and do not touch the camera body, for it can be heated up to 70℉.
When installing the camera, please avoid pointing it directly to paper or
flammable materials.
Although the camera is provided with tempered glass, please
avoid all direct contact to eliminate contamination, and use cotton
balls dipped in cleaning alcohol to clean the window.
2. Description
This inbuilt Infrared Illuminator camera uses a high sensitive 1/3”
(1/4”) interline transfer Charge Coupled Device (CCD) image sensor,
and all state circuitry, which provides extremely long life and high
reliability. This camera offers excellent image quality and functions
with low lag and high burn resistance, and is not subject to distortions
from magnetic fields.
Highly resistant to shock and vibration and easy to install, this
camera is an excellent choice for your CCTV system.

2
3. Feature
Built-in high quality CCD camera and high performance infrared
illuminator module.
Infrared illuminator has effective range of up to 10 (15) meters
and wide angle at 70°(80°), also assists cameras in providing a
clear image when under completely dark area.
Infrared Illuminator has built-in 12 (24) pieces 850nm wavelength
infrared Light-Emitting Diode and provides over 6000 hours life.
Built-in CDS light-source sensor can automatically turn on/ off the
infrared illuminator by detecting the light source of the environment.
Waterproof suitable for indoor and outdoor use.
4. Content
1
3
ED
2
CB
A

3
Item Name of Part Quantity
Type A
0 Instruction Manual 1
1 Infrared Camera 1
2 Mounting Bracket Bag 1
A Base Plate 1
B Supporting Arm 1
C Mounting Bracket A 1
3 Appurtenances Bag 1
D Fix Retaining Screw for Bracket A 3
E Anchor 3
5. INSTALLATION & OPERATION
1. Use the 3 screws provided to attach the mounting bracket to the
surface or wall, assemble all spare parts to the Base Plate and tighten
the camera Wing nut (as shown on Figure 1).
C A
D
C A
D
B
Figure 1
E
E
Figure 1

4
2. Screw the Mounting Bracket into the camera mounting post; then
adjust the camera to approximate location and tighten the camera
wing nut (as shown on Figure 2).
3. Connect the Video Output and the Power Input (as shown on
Figure 2).
Figure 2
PowerInput
Videput
oO
ut
Figure 2

5
6. SPECIFICATIONS
According to the camera purchased, select and refer to the appropriate specification below:
Color Camera
Image Device
1/3” Color
SONY Super
HAD
1/4” Color
SONY Super
HAD
1/3” Color
SHARP
1/4” Color
SHARP Hi-Res.
Picture Elements NTSC: 510x492
PAL: 500x582
NTSC: 512x492
PAL: 512x582
NTSC: 768x494
PAL: 752x582
Resolution 380 TVL 330 TVL 380 TVL 470 TVL
Min Illumination 0.2Lux/ F2.0 0.5Lux/ F2.0 0.3Lux/ F2.0 0.5Lux/ 2.0
S/N Ratio More than 48dB
Electronic Shutter NTSC: 1/60S~1/100,000S, PAL: 1/50S~1/110,000S
Gain Control Auto
White Balance Color Temperature: 2500K~9500K
Scanning System Interlace 2:1
Gamma 0.45
Lens Furnished Board Lens f3.6mm/ F2.0 (optional: 4.3/ 6.0/ 8.0/ 12mm)
Sync System Internal
Mirror - Yes
Video Output 1Vp-p/ 75 Ohms
Power Supply 12V DC±10％
Power Consumption 3.4 W (12 IR LED ON)/ 4.4 W (24 IR LED ON)
B/W Camera
Image Device 1/3” B/W SONY
Super HAD
1/3” B/W SONY
Hi-Res. Super HAD
1/3” B/W
SAMSUNG
Picture Elements EIA: 510X492
CCIR: 500x582
EIA: 768x494
CCIR: 752x582
EIA: 510X492
CCIR: 500x582
Resolution 420 TVL 600 TVL 400 TVL
Min Illumination 0.1Lux/ F2.0 0.2Lux/ F2.0 0.3Lux/ F2.0
S/N Ratio More than 48Db
Electronic Shutter EIA: 1/60S~1/100,000S, CCIR: 1/50S~1/110,000S
Gain Control Auto
Scanning System Interlace 2:1
Gamma 0.45
Lens Furnished Board Lens f3.6mm/ F2.0 (optional: 4.3/ 6.0/ 8.0/ 12mm)
Sync System Internal
Video Output 1Vp-p/ 75 Ohms
Power Supply 12V DC±10％
Power Consumption 3.5 W (12 IR LED ON)/ 4.5 W (24IR LED ON)

6
Infrared Illuminator Module
Infrared Luminary 12 IR LED 24 IR LED
Filter Tempered Glass
Wavelength 850nm
Beam Spread Angle 35° 40°
Illuminant Distance 10 M 20 M
Power Supply 12V DC±10％
Power Consumption 2 W 3 W
System Device
Operating Temp. -10℃to 50℃(14℉to 122℉)
Construction Aluminum Case
Waterproofing
Criterion IP 67
Dimensions φ53x58 (L) mm (Body only)
(Note: Design and specifications are subject to change without prior notice.)