Tc-helicon Voicetone c1 User manual

16.09.23, 12:10

Seite 1 von 2about:blank

www.tc-helicon.com - www.youtube.com/tchelicon

www.tc-helicon.com - www.youtube.com/tcheliconwww.tc-helicon.com - www.youtube.com/tchelicon

(EN) Introduction

(EN) Introduction(EN) Introduction

VoiceTone C1 offers correction, HardTune and Gender effects in an easy-to-use footpedal.

VoiceTone C1 offers correction, HardTune and Gender effects in an easy-to-use footpedal.VoiceTone C1 offers correction, HardTune and Gender effects in an easy-to-use footpedal.

This product is ideal for singers who seek ultimate pitch accuracy in live performance and recording. It

This product is ideal for singers who seek ultimate pitch accuracy in live performance and recording. ItThis product is ideal for singers who seek ultimate pitch accuracy in live performance and recording. It

also produces the infamous “Cher” effect where pitch correction is used as a robot-type effect. A

also produces the infamous “Cher” effect where pitch correction is used as a robot-type effect. Aalso produces the infamous “Cher” effect where pitch correction is used as a robot-type effect. A

Gender control adds to the mayhem to make your voice deeper (male) or thinner (female>alien).

Gender control adds to the mayhem to make your voice deeper (male) or thinner (female>alien).Gender control adds to the mayhem to make your voice deeper (male) or thinner (female>alien).

• Super-simple setup and control

• Super-simple setup and control• Super-simple setup and control

• “Mild to Wild” correction possible by varying the Attack control

• “Mild to Wild” correction possible by varying the Attack control• “Mild to Wild” correction possible by varying the Attack control

• Flexible guide methods include Key control, Chromatic (no key), and chordal instrument in/thru.

• Flexible guide methods include Key control, Chromatic (no key), and chordal instrument in/thru.• Flexible guide methods include Key control, Chromatic (no key), and chordal instrument in/thru.

• Instrument Thru has ground lift to minimize buzz/hum.

• Instrument Thru has ground lift to minimize buzz/hum.• Instrument Thru has ground lift to minimize buzz/hum.

• Mic Control feature works with optional TC-Helicon MP-75 mic to add “on-mic” effect switching.

• Mic Control feature works with optional TC-Helicon MP-75 mic to add “on-mic” effect switching.• Mic Control feature works with optional TC-Helicon MP-75 mic to add “on-mic” effect switching.

• USB connection to computer for easy firmware updates, news and tips via the free VoiceSupport

• USB connection to computer for easy firmware updates, news and tips via the free VoiceSupport• USB connection to computer for easy firmware updates, news and tips via the free VoiceSupport

application.

application.application.

• Balanced XLR in and out with phantom power for condenser microphones.

• Balanced XLR in and out with phantom power for condenser microphones.• Balanced XLR in and out with phantom power for condenser microphones.

Connecting

ConnectingConnecting

MIC jack

MIC jackMIC jack

- Connect your mic here using a balanced XLR cable.

- Connect your mic here using a balanced XLR cable.- Connect your mic here using a balanced XLR cable.

Phantom power is always on.

Phantom power is always on.Phantom power is always on.

OUT jack

OUT jackOUT jack

- Connect to your PA mixer, another VoiceTone pedal

- Connect to your PA mixer, another VoiceTone pedal- Connect to your PA mixer, another VoiceTone pedal

or powered speaker.

or powered speaker.or powered speaker.

Power in

Power inPower in

- Connect the supplied 12VDC power supply.

- Connect the supplied 12VDC power supply.- Connect the supplied 12VDC power supply.

Optional:

Optional:Optional:

USB

USBUSB

- Connect to a computer running the TC-Helicon

- Connect to a computer running the TC-Helicon- Connect to a computer running the TC-Helicon

VoiceSupport application for registration, latest version and tips.

VoiceSupport application for registration, latest version and tips.VoiceSupport application for registration, latest version and tips.

INST IN

INST ININST IN

- Chords played on this instrument will be recognized

- Chords played on this instrument will be recognized- Chords played on this instrument will be recognized

when the Key selector is set to Chromatic.

when the Key selector is set to Chromatic.when the Key selector is set to Chromatic.

INST OUT

INST OUTINST OUT

- Connect to a PA or guitar amp to hear your

- Connect to a PA or guitar amp to hear your- Connect to a PA or guitar amp to hear your

instrument.

instrument.instrument.

PAPA

•

••

Turn down your PA when making all connections

Turn down your PA when making all connectionsTurn down your PA when making all connections

•

••

The latest version of V

The latest version of VThe latest version of V

oiceSupport is available free from www.tc-helicon.com/voicesupport

oiceSupport is available free from www.tc-helicon.com/voicesupportoiceSupport is available free from www.tc-helicon.com/voicesupport

•

••

The USB connection does not provide power to the unit

The USB connection does not provide power to the unitThe USB connection does not provide power to the unit

•

••

If you hear hum from your P

If you hear hum from your PIf you hear hum from your P

A or amp, push the GRND LIFT in. Otherwise, it should remain out.

A or amp, push the GRND LIFT in. Otherwise, it should remain out.A or amp, push the GRND LIFT in. Otherwise, it should remain out.

First Setup and Use

First Setup and UseFirst Setup and Use

1. Turn down your PA’s master volume.

1. Turn down your PA’s master volume.1. Turn down your PA’s master volume.

2. Connect your mic and PA as shown in the diagram first, then plug in the AC adaptor. For live

2. Connect your mic and PA as shown in the diagram first, then plug in the AC adaptor. For live2. Connect your mic and PA as shown in the diagram first, then plug in the AC adaptor. For live

performance, a USB connection to a computer is not required.

performance, a USB connection to a computer is not required.performance, a USB connection to a computer is not required.

3. Set the key to C, Attack control to Hard and the Gender control to the center notch.

3. Set the key to C, Attack control to Hard and the Gender control to the center notch.3. Set the key to C, Attack control to Hard and the Gender control to the center notch.

Optional

OptionalOptional

- Connect an instrument as shown to guide correction and override the Key selector.

- Connect an instrument as shown to guide correction and override the Key selector.- Connect an instrument as shown to guide correction and override the Key selector.

4. Sing into your mic while adjusting the MIC GAIN control so that the input level LED flashes green.

4. Sing into your mic while adjusting the MIC GAIN control so that the input level LED flashes green.4. Sing into your mic while adjusting the MIC GAIN control so that the input level LED flashes green.

Brief flashes of red on the LED on your loudest singing are ok.

Brief flashes of red on the LED on your loudest singing are ok.Brief flashes of red on the LED on your loudest singing are ok.

5. Ensure that the effect is on (center LED is lit).

5. Ensure that the effect is on (center LED is lit).5. Ensure that the effect is on (center LED is lit).

6. Sing while turning up your PA volume to a comfortable level.

6. Sing while turning up your PA volume to a comfortable level.6. Sing while turning up your PA volume to a comfortable level.

As you sing, you will hear your voice jumping from pitch to pitch in the key of C major. Play an

As you sing, you will hear your voice jumping from pitch to pitch in the key of C major. Play anAs you sing, you will hear your voice jumping from pitch to pitch in the key of C major. Play an

instrument or accompaniment in the same key to hear the HardTune effect in context. Now you can

instrument or accompaniment in the same key to hear the HardTune effect in context. Now you caninstrument or accompaniment in the same key to hear the HardTune effect in context. Now you can

experiment with the controls before reading the Effect Descriptions section below.

experiment with the controls before reading the Effect Descriptions section below.experiment with the controls before reading the Effect Descriptions section below.

Phantom Power

Phantom PowerPhantom Power

There is no switch to enable phantom power on the VoiceTone singles. Phantom power is available

There is no switch to enable phantom power on the VoiceTone singles. Phantom power is availableThere is no switch to enable phantom power on the VoiceTone singles. Phantom power is available

when the product is powered. Microphones that don’t require phantom power will operate properly.

when the product is powered. Microphones that don’t require phantom power will operate properly.when the product is powered. Microphones that don’t require phantom power will operate properly.

Always apply power as the last connection step and ensure your PA is muted. This will reduce the

Always apply power as the last connection step and ensure your PA is muted. This will reduce theAlways apply power as the last connection step and ensure your PA is muted. This will reduce the

chance of audio pops that could harm your equipment.

chance of audio pops that could harm your equipment.chance of audio pops that could harm your equipment.

Effect Descriptions

Effect DescriptionsEffect Descriptions

Key control

Key controlKey control

- Setting this control to your song’s accompaniment key is essential for HardT

- Setting this control to your song’s accompaniment key is essential for HardT- Setting this control to your song’s accompaniment key is essential for HardT

une and

une andune and

pitch correction to be musically useful. While this selector only offers major keys, you are able to select

pitch correction to be musically useful. While this selector only offers major keys, you are able to selectpitch correction to be musically useful. While this selector only offers major keys, you are able to select

relative minor keys according to the chart following:

relative minor keys according to the chart following:relative minor keys according to the chart following:

Major

MajorMajor

C C# D D# E F F# G G# A A# B

C C# D D# E F F# G G# A A# BC C# D D# E F F# G G# A A# B

Natural Minor

Natural MinorNatural Minor

AmAm

A#m

A#mA#m

BmBm

CmCm

C#m

C#mC#m

DmDm

D#m

D#mD#m

EmEm

FmFm

F#m

F#mF#m

GmGm

G#m

G#mG#m

Dorian Minor

Dorian MinorDorian Minor

DmDm

D#m

D#mD#m

EmEm

FmFm

F#m

F#mF#m

GmGm

G#m

G#mG#m

AmAm

A#m

A#mA#m

BmBm

CmCm

C#m

C#mC#m

Important Safety Instructions

Important Safety InstructionsImportant Safety Instructions

Read these instructions.

Read these instructions.Read these instructions.

Keep these instructions.

Keep these instructions.Keep these instructions.

Heed all warnings.

Heed all warnings.Heed all warnings.

Follow all instructions.

Follow all instructions.Follow all instructions.

Do not use this apparatus near water

Do not use this apparatus near waterDo not use this apparatus near water

Clean only with dry cloth.

Clean only with dry cloth.Clean only with dry cloth.

Do not block any ventilation openings. Install in accor-

Do not block any ventilation openings. Install in accor-Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

dance with the manufacturer’s instructions.dance with the manufacturer’s instructions.

Do not install near heat sources such as radiators, heat

Do not install near heat sources such as radiators, heatDo not install near heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampli-

registers, stoves, or other apparatus (including ampli-registers, stoves, or other apparatus (including ampli-

fiers) that produce heat.

fiers) that produce heat.fiers) that produce heat.

Only use attachments/accessories specified by the

Only use attachments/accessories specified by theOnly use attachments/accessories specified by the

manufacturer

manufacturermanufacturer

10 Refer all servicing to qualified service personnel.

10 Refer all servicing to qualified service personnel.10 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

Servicing is required when the apparatus has beenServicing is required when the apparatus has been

damaged in any way

damaged in any waydamaged in any way

, such as power-supply cord or

, such as power-supply cord or, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

plug is damaged, liquid has been spilled or objectsplug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

have fallen into the apparatus, the apparatus has beenhave fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally

exposed to rain or moisture, does not operate normallyexposed to rain or moisture, does not operate normally

or has been dropped.

or has been dropped.or has been dropped.

Warning!

Warning!Warning!

•

••

o reduce the risk of fire or electrical shock, do not

o reduce the risk of fire or electrical shock, do noto reduce the risk of fire or electrical shock, do not

expose this equipment to dripping or splashing and

expose this equipment to dripping or splashing andexpose this equipment to dripping or splashing and

ensure that no objects filled with liquids, such as vases,

ensure that no objects filled with liquids, such as vases,ensure that no objects filled with liquids, such as vases,

are placed on the equipment.

are placed on the equipment.are placed on the equipment.

•

••

Do not inst

Do not instDo not inst

all in a confined space.

all in a confined space.all in a confined space.

Service

ServiceService

•

••

All service must be performed by qualified personnel.

All service must be performed by qualified personnel.All service must be performed by qualified personnel.

Caution:

Caution:Caution:

ou are cautioned that any change or modifications not

ou are cautioned that any change or modifications notou are cautioned that any change or modifications not

expressly approved in this manual could void your

expressly approved in this manual could void yourexpressly approved in this manual could void your

authority to operate this equipment.

authority to operate this equipment.authority to operate this equipment.

EMC/EMI

EMC/EMIEMC/EMI

This equipment has been tested and found to comply with

This equipment has been tested and found to comply withThis equipment has been tested and found to comply with

the limits for a Class B Digital device, pursuant to p

the limits for a Class B Digital device, pursuant to pthe limits for a Class B Digital device, pursuant to p

art 15

art 15art 15

of the FCC rules.

of the FCC rules.of the FCC rules.

These limits are designed to provide reasonable protection

These limits are designed to provide reasonable protectionThese limits are designed to provide reasonable protection

against harmful interference in residential installations.

against harmful interference in residential installations.against harmful interference in residential installations.

This equipment generates, uses and can radiate radio

This equipment generates, uses and can radiate radioThis equipment generates, uses and can radiate radio

frequency energy and – if not installed and used in

frequency energy and – if not installed and used infrequency energy and – if not installed and used in

accordance with the instructions – may cause harmful

accordance with the instructions – may cause harmfulaccordance with the instructions – may cause harmful

interference to radio communications. However

interference to radio communications. Howeverinterference to radio communications. However

, there is

, there is, there is

no guarantee that interference will not occur in a particular

no guarantee that interference will not occur in a particularno guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

installation. If this equipment does cause harmfulinstallation. If this equipment does cause harmful

interference to radio or television reception – which can be

interference to radio or television reception – which can beinterference to radio or television reception – which can be

determined by turning the equipment off and on –, the

determined by turning the equipment off and on –, thedetermined by turning the equipment off and on –, the

user is encouraged to try correcting the interference by

user is encouraged to try correcting the interference byuser is encouraged to try correcting the interference by

one or more of the following measures:

one or more of the following measures:one or more of the following measures:

•

••

Reorient or relocate the receiving antenna.

Reorient or relocate the receiving antenna.Reorient or relocate the receiving antenna.

•

••

Increase the separation between the equipment and

Increase the separation between the equipment andIncrease the separation between the equipment and

the receiver

the receiverthe receiver

•

••

Connect the equipment to an outlet on a circuit

Connect the equipment to an outlet on a circuitConnect the equipment to an outlet on a circuit

different from the one to which the receiver is

different from the one to which the receiver isdifferent from the one to which the receiver is

connected.

connected.connected.

•

••

Consult the dealer or an experienced radio/TV

Consult the dealer or an experienced radio/TVConsult the dealer or an experienced radio/TV

technician for help.

technician for help.technician for help.

For the customers in Canada:

For the customers in Canada:For the customers in Canada:

This Class B digital apparatus complies with Canadian

This Class B digital apparatus complies with CanadianThis Class B digital apparatus complies with Canadian

ICES-003. Cet appareil numérique de la classe B est

ICES-003. Cet appareil numérique de la classe B estICES-003. Cet appareil numérique de la classe B est

conforme à la norme NMB-003 du Canada.

conforme à la norme NMB-003 du Canada.conforme à la norme NMB-003 du Canada.

¡Precaución!

¡Precaución!¡Precaución!

•

••

Para reducir el riesgo de incendios o descargas eléctri-

Para reducir el riesgo de incendios o descargas eléctri-Para reducir el riesgo de incendios o descargas eléctri-

cas, no permita que este aparato quede expuesto a

cas, no permita que este aparato quede expuesto acas, no permita que este aparato quede expuesto a

salpicaduras y asegúrese de no colocar sobre él

salpicaduras y asegúrese de no colocar sobre élsalpicaduras y asegúrese de no colocar sobre él

ningún objeto que contenga líquidos, como un jarrón,

ningún objeto que contenga líquidos, como un jarrón,ningún objeto que contenga líquidos, como un jarrón,

para evitar que se pueda derramar

para evitar que se pueda derramarpara evitar que se pueda derramar

•

••

No inst

No instNo inst

ale este aparato dentro de un espacio confina-

ale este aparato dentro de un espacio confina-ale este aparato dentro de un espacio confina-

do, como encastrado en una librería.

do, como encastrado en una librería.do, como encastrado en una librería.

Reparaciones

ReparacionesReparaciones

•

••

Cualquier rep

Cualquier repCualquier rep

aración debe ser realizada únicamente

aración debe ser realizada únicamentearación debe ser realizada únicamente

por personal de un servicio técnico oficial.

por personal de un servicio técnico oficial.por personal de un servicio técnico oficial.

Atención:

Atención:Atención:

Le advertimos que cualquier cambio o modificación que

Le advertimos que cualquier cambio o modificación queLe advertimos que cualquier cambio o modificación que

no aparezca aprobada expresamente en este manual

no aparezca aprobada expresamente en este manualno aparezca aprobada expresamente en este manual

puede anular su autorización a utilizar este aparato.

puede anular su autorización a utilizar este aparato.puede anular su autorización a utilizar este aparato.

la hora de sustituir la pila, siga cuidadosamente las

la hora de sustituir la pila, siga cuidadosamente lasla hora de sustituir la pila, siga cuidadosamente las

instrucciones sobre manejo de la misma que aparecen en

instrucciones sobre manejo de la misma que aparecen eninstrucciones sobre manejo de la misma que aparecen en

este manual.

este manual.este manual.

Attention Danger!

Attention Danger!Attention Danger!

•

••

Pour éviter tout risque d’électrocution ou d’incendie, ne

Pour éviter tout risque d’électrocution ou d’incendie, nePour éviter tout risque d’électrocution ou d’incendie, ne

pas exposer cet appareil à quelque source liquide

pas exposer cet appareil à quelque source liquidepas exposer cet appareil à quelque source liquide

(goûtes d’eau, projections liquides,etc.) et veillez à ne

(goûtes d’eau, projections liquides,etc.) et veillez à ne(goûtes d’eau, projections liquides,etc.) et veillez à ne

poser aucun objet contenant un liquide sur l’appareil.

poser aucun objet contenant un liquide sur l’appareil.poser aucun objet contenant un liquide sur l’appareil.

•

••

Do not inst

Do not instDo not inst

all in a confined space.

all in a confined space.all in a confined space.

Service

ServiceService

•

••

Confiez toutes les opérations de maintenance à un

Confiez toutes les opérations de maintenance à unConfiez toutes les opérations de maintenance à un

personnel qualifié.

personnel qualifié.personnel qualifié.

oiceT

oiceToiceT

one C

one Cone C

USER’S MANUAL

USER’S MANUALUSER’S MANUAL

BEDIENUNGSANLEITUNG

BEDIENUNGSANLEITUNGBEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUAL DE INSTRUCCIONESMANUAL DE INSTRUCCIONES

MANUALE D’USO

MANUALE D’USOMANUALE D’USO

MODE D’EMPLOI

MODE D’EMPLOIMODE D’EMPLOI

Achtung!

Achtung!Achtung!

•

••

Um die Gefahr eines Feuers oder eines elektrischen

Um die Gefahr eines Feuers oder eines elektrischenUm die Gefahr eines Feuers oder eines elektrischen

Schlages zu vermeiden, dürfen Sie dieses Gerät

Schlages zu vermeiden, dürfen Sie dieses GerätSchlages zu vermeiden, dürfen Sie dieses Gerät

keinem tropfendem W

keinem tropfendem Wkeinem tropfendem W

asser oder Spritzwasser ausset-

asser oder Spritzwasser ausset-asser oder Spritzwasser ausset-

zen. S

zen. Szen. S

tellen Sie keine mit Flüssigkeiten gefüllten

tellen Sie keine mit Flüssigkeiten gefülltentellen Sie keine mit Flüssigkeiten gefüllten

Behältnisse – wie beispielsweise V

Behältnisse – wie beispielsweise VBehältnisse – wie beispielsweise V

asen – auf diesem

asen – auf diesemasen – auf diesem

Gerät ab.

Gerät ab.Gerät ab.

•

••

Montieren Sie das Gerät nicht in einem vollständig

Montieren Sie das Gerät nicht in einem vollständigMontieren Sie das Gerät nicht in einem vollständig

geschlossenen Behälter oder Gehäuse.

geschlossenen Behälter oder Gehäuse.geschlossenen Behälter oder Gehäuse.

Wartung

WartungWartung

•

••

Alle W

Alle WAlle W

artungsarbeiten müssen von einem hierfür quali-

artungsarbeiten müssen von einem hierfür quali-artungsarbeiten müssen von einem hierfür quali-

fizierten Servicetechniker durchgeführt werden.

fizierten Servicetechniker durchgeführt werden.fizierten Servicetechniker durchgeführt werden.

Achtung:

Achtung:Achtung:

Änderungen an diesem Gerät, die im Rahmen dieser

Änderungen an diesem Gerät, die im Rahmen dieserÄnderungen an diesem Gerät, die im Rahmen dieser

Anleitung nicht ausdrücklich zugelassen wurden, können

Anleitung nicht ausdrücklich zugelassen wurden, könnenAnleitung nicht ausdrücklich zugelassen wurden, können

das Erlöschen der Betriebserlaubnis für dieses Gerät zur

das Erlöschen der Betriebserlaubnis für dieses Gerät zurdas Erlöschen der Betriebserlaubnis für dieses Gerät zur

Folge haben.

Folge haben.Folge haben.

Folgen Sie beim

Folgen Sie beimFolgen Sie beim

Auswechseln der Batterie den

Auswechseln der Batterie denAuswechseln der Batterie den

Anweisungen zur Handhabung von Batterien in dieser

Anweisungen zur Handhabung von Batterien in dieserAnweisungen zur Handhabung von Batterien in dieser

Bedienungsanleitung.

Bedienungsanleitung.Bedienungsanleitung.

Attenzione!

Attenzione!Attenzione!

•

••

Per ridurre il rischio di incendio o scossa elettrica, non

Per ridurre il rischio di incendio o scossa elettrica, nonPer ridurre il rischio di incendio o scossa elettrica, non

esporre questo dispositivo allo sgocciolamento o agli

esporre questo dispositivo allo sgocciolamento o agliesporre questo dispositivo allo sgocciolamento o agli

schizzi di alcun liquido. Non posizionare sul dispositivo

schizzi di alcun liquido. Non posizionare sul dispositivoschizzi di alcun liquido. Non posizionare sul dispositivo

oggetti contenenti liquidi, come vasi o bicchieri.

oggetti contenenti liquidi, come vasi o bicchieri.oggetti contenenti liquidi, come vasi o bicchieri.

•

••

Non inst

Non instNon inst

allare in uno spazio ristretto.

allare in uno spazio ristretto.allare in uno spazio ristretto.

Assistenza

AssistenzaAssistenza

•

••

Ogni intervento tecnico deve essere ef

Ogni intervento tecnico deve essere efOgni intervento tecnico deve essere ef

fettuato solo da

fettuato solo dafettuato solo da

personale qualificato.

personale qualificato.personale qualificato.

Cautela:

Cautela:Cautela:

Si avverte che qualsiasi cambiamento e modifica non

Si avverte che qualsiasi cambiamento e modifica nonSi avverte che qualsiasi cambiamento e modifica non

espressamente approvata in questo manuale può

espressamente approvata in questo manuale puòespressamente approvata in questo manuale può

annullare la vostra autorità di utilizzo del dispositivo.

annullare la vostra autorità di utilizzo del dispositivo.annullare la vostra autorità di utilizzo del dispositivo.

Per sostituire la batteria, seguire attentamente le

Per sostituire la batteria, seguire attentamente lePer sostituire la batteria, seguire attentamente le

procedure fornite all’interno di questo manuale.

procedure fornite all’interno di questo manuale.procedure fornite all’interno di questo manuale.

1 -

1 -1 -

Effect on/off footswitch

Effect on/off footswitchEffect on/off footswitch

2 -

2 -2 -

Instrument Thru to amp/PA

Instrument Thru to amp/PAInstrument Thru to amp/PA

3 -

3 -3 -

Instrument ground lift: in=lifted

Instrument ground lift: in=liftedInstrument ground lift: in=lifted

4 -

4 -4 -

Mic input level control

Mic input level controlMic input level control

5 -

5 -5 -

Key selector including Chromatic (CH)

Key selector including Chromatic (CH)Key selector including Chromatic (CH)

6 -

6 -6 -

Attack speed control

Attack speed controlAttack speed control

7 -

7 -7 -

Gender control

Gender controlGender control

8 -

8 -8 -

Balanced XLR mic input

Balanced XLR mic inputBalanced XLR mic input

9 -

9 -9 -

Balanced XLR mono output

Balanced XLR mono outputBalanced XLR mono output

10 - Power in

10 - Power in10 - Power in

11 - USB connector to computer

11 - USB connector to computer11 - USB connector to computer

12 - Input level LED; green=signal, red=clip

12 - Input level LED; green=signal, red=clip12 - Input level LED; green=signal, red=clip

13 - Effect on/off via optional mic (MP-75): in=on

13 - Effect on/off via optional mic (MP-75): in=on13 - Effect on/off via optional mic (MP-75): in=on

14 - Guide instrument input jack

14 - Guide instrument input jack14 - Guide instrument input jack

15 - Effect active LED indicator

15 - Effect active LED indicator15 - Effect active LED indicator

9 10

9 109 10

1111

1212

1313

1414

1515

16.09.23, 12:10

Seite 2 von 2about:blank

In the key of C, the Natural Minor has a G# where Dorian has an A. The CH (chromatic) setting works

In the key of C, the Natural Minor has a G# where Dorian has an A. The CH (chromatic) setting worksIn the key of C, the Natural Minor has a G# where Dorian has an A. The CH (chromatic) setting works

with accompaniment in any key. It is used with a slow attack control setting for subtle, overall pitch cor-

with accompaniment in any key. It is used with a slow attack control setting for subtle, overall pitch cor-with accompaniment in any key. It is used with a slow attack control setting for subtle, overall pitch cor-

rection.

rection.rection.

When an instrument is connected, the CH setting enables chord recognition.

When an instrument is connected, the CH setting enables chord recognition.When an instrument is connected, the CH setting enables chord recognition.

Attack control

Attack controlAttack control

At left, no pitch correction is heard, allowing Gender-only effect

At left, no pitch correction is heard, allowing Gender-only effectAt left, no pitch correction is heard, allowing Gender-only effect

s. Up to the notch are

s. Up to the notch ares. Up to the notch are

useful pitch correction attack rates. Towards the Hard setting tuning becomes an effect.

useful pitch correction attack rates. Towards the Hard setting tuning becomes an effect.useful pitch correction attack rates. Towards the Hard setting tuning becomes an effect.

Gender control

Gender controlGender control

- The center notch setting is neutral (no gender).

- The center notch setting is neutral (no gender).- The center notch setting is neutral (no gender).

The left side offers thickened, “male”

The left side offers thickened, “male”The left side offers thickened, “male”

gender effects. To the right are “female” to “alien” gender effects. These can be used in combination

gender effects. To the right are “female” to “alien” gender effects. These can be used in combinationgender effects. To the right are “female” to “alien” gender effects. These can be used in combination

with correction if desired.

with correction if desired.with correction if desired.

INST IN

INST ININST IN

chordal instrument (with no ef

chordal instrument (with no efchordal instrument (with no ef

fects) such as a guitar will guide the correction to match your

fects) such as a guitar will guide the correction to match yourfects) such as a guitar will guide the correction to match your

music. This is the most flexible method because key alone may not match all your songs.

music. This is the most flexible method because key alone may not match all your songs.music. This is the most flexible method because key alone may not match all your songs.

Dorian Minor

Dorian MinorDorian Minor

DmDm

D#m

D#mD#m

EmEm

FmFm

F#m

F#mF#m

GmGm

G#m

G#mG#m

AmAm

A#m

A#mA#m

BmBm

CmCm

C#m

C#mC#m

2. Install VoiceSupport on your computer.

2. Install VoiceSupport on your computer.2. Install VoiceSupport on your computer.

3. Connect your product via USB to your computer.

3. Connect your product via USB to your computer.3. Connect your product via USB to your computer.

4. Run VoiceSupport.

4. Run VoiceSupport.4. Run VoiceSupport.

5. Read the news, click on tabs and browse the features of the application.

5. Read the news, click on tabs and browse the features of the application.5. Read the news, click on tabs and browse the features of the application.

Using the Mic Control Feature

Using the Mic Control FeatureUsing the Mic Control Feature

Mic Control allows you to turn effects on and off from the optional TC-Helicon MP-75 microphone. Push

Mic Control allows you to turn effects on and off from the optional TC-Helicon MP-75 microphone. PushMic Control allows you to turn effects on and off from the optional TC-Helicon MP-75 microphone. Push

the MIC CONTROL

the MIC CONTROLthe MIC CONTROL

switch in to allow remote on/of

switch in to allow remote on/ofswitch in to allow remote on/of

f control on any or all pedals in a chain.

f control on any or all pedals in a chain.f control on any or all pedals in a chain.

When Mic

When MicWhen Mic

Control is not desired, ensure the switch is out.

Control is not desired, ensure the switch is out.Control is not desired, ensure the switch is out.

Using multiple pedals requires the

Using multiple pedals requires theUsing multiple pedals requires the

control signal pass

control signal passcontrol signal pass

through

throughthrough

feature to be enabled on all but the last pedal. T

feature to be enabled on all but the last pedal. Tfeature to be enabled on all but the last pedal. T

o enable or disable this feature, hold the effect

o enable or disable this feature, hold the effecto enable or disable this feature, hold the effect

footswitch and the switch on the mic for 3 seconds.

footswitch and the switch on the mic for 3 seconds.footswitch and the switch on the mic for 3 seconds.

Tips for Avoiding Feedback

Tips for Avoiding FeedbackTips for Avoiding Feedback

•

••

Ensure your monitor and/or PA speakers don’t aim directly at the front of your mic

Ensure your monitor and/or PA speakers don’t aim directly at the front of your micEnsure your monitor and/or PA speakers don’t aim directly at the front of your mic

•

••

Sing close to the mic, even touching the grill with your lips

Sing close to the mic, even touching the grill with your lipsSing close to the mic, even touching the grill with your lips

• Try a super-cardioid dynamic mic such as TC-Helicon’s MP-70 and MP-75

• Try a super-cardioid dynamic mic such as TC-Helicon’s MP-70 and MP-75• Try a super-cardioid dynamic mic such as TC-Helicon’s MP-70 and MP-75

• Set your PA channel EQ and graphic EQ flat

• Set your PA channel EQ and graphic EQ flat• Set your PA channel EQ and graphic EQ flat

• Have your band play quieter on stage.

• Have your band play quieter on stage.• Have your band play quieter on stage.

FAQ

FAQFAQ

Why am I hearing distortion?

Why am I hearing distortion?Why am I hearing distortion?

Likely the MIC GAIN knob is set too high. Ensure that the Input LED is green most of the time with only

Likely the MIC GAIN knob is set too high. Ensure that the Input LED is green most of the time with onlyLikely the MIC GAIN knob is set too high. Ensure that the Input LED is green most of the time with only

brief and rare peaks of red.

brief and rare peaks of red.brief and rare peaks of red.

Can I use the product on an auxiliary send/return?

Can I use the product on an auxiliary send/return?Can I use the product on an auxiliary send/return?

Yes. You will need balanced XLR to TRS cables to do so. Ensure that the MIC GAIN knob is set to

Yes. You will need balanced XLR to TRS cables to do so. Ensure that the MIC GAIN knob is set toYes. You will need balanced XLR to TRS cables to do so. Ensure that the MIC GAIN knob is set to

minimum to accept the line level signal from your mixer.

minimum to accept the line level signal from your mixer.minimum to accept the line level signal from your mixer.

Will I need a DI box to connect to a mixer?

Will I need a DI box to connect to a mixer?Will I need a DI box to connect to a mixer?

No.

No.No.

Why is the effect turning the effect on and off by itself?

Why is the effect turning the effect on and off by itself?Why is the effect turning the effect on and off by itself?

This can happen when you have the MIC CONTROL knob pushed in and you are connected to a mixer

This can happen when you have the MIC CONTROL knob pushed in and you are connected to a mixerThis can happen when you have the MIC CONTROL knob pushed in and you are connected to a mixer

with “pseudo balanced” outputs. Unless you are using only the specific TC-Helicon mic with the Mic

with “pseudo balanced” outputs. Unless you are using only the specific TC-Helicon mic with the Micwith “pseudo balanced” outputs. Unless you are using only the specific TC-Helicon mic with the Mic

Control feature, the MIC CONTROL knob should be out.

Control feature, the MIC CONTROL knob should be out.Control feature, the MIC CONTROL knob should be out.

personnel qualifié.

personnel qualifié.personnel qualifié.

Attention:

Attention:Attention:

oute modification apportée à l’appareil et qui n’est pas

oute modification apportée à l’appareil et qui n’est pasoute modification apportée à l’appareil et qui n’est pas

expressément préconisée dans ce manuel invalide votre

expressément préconisée dans ce manuel invalide votreexpressément préconisée dans ce manuel invalide votre

droit à utiliser cet appareil.

droit à utiliser cet appareil.droit à utiliser cet appareil.

Lors du remplacement de la pile, suivez attentivement les

Lors du remplacement de la pile, suivez attentivement lesLors du remplacement de la pile, suivez attentivement les

instructions spécifiées dans ce manuel.

instructions spécifiées dans ce manuel.instructions spécifiées dans ce manuel.

www

wwwwww

.tchelicon.com - Prod. No: E6051521

.tchelicon.com - Prod. No: E6051521.tchelicon.com - Prod. No: E6051521

Using Multiple

Using MultipleUsing Multiple

VoiceT

VoiceTVoiceT

one Single Pedals

one Single Pedalsone Single Pedals

It is possible (even encouraged!) to use more than one VoiceTone pedal at a time. You will only need to

It is possible (even encouraged!) to use more than one VoiceTone pedal at a time. You will only need toIt is possible (even encouraged!) to use more than one VoiceTone pedal at a time. You will only need to

adjust the MIC GAIN control of the first pedal in the chain. On the rest, MIC GAIN should be set to the

adjust the MIC GAIN control of the first pedal in the chain. On the rest, MIC GAIN should be set to theadjust the MIC GAIN control of the first pedal in the chain. On the rest, MIC GAIN should be set to the

minimum (fully left) position.

minimum (fully left) position.minimum (fully left) position.

The order of the pedals is important. See the following table showing 2, 3 and 4 pedal combinations.

The order of the pedals is important. See the following table showing 2, 3 and 4 pedal combinations.The order of the pedals is important. See the following table showing 2, 3 and 4 pedal combinations.

2 Pedals

2 Pedals2 Pedals

D1 > R1

D1 > R1D1 > R1

T1 > D1

T1 > D1T1 > D1

C1 > D1

C1 > D1C1 > D1

3 Pedals

3 Pedals3 Pedals

T1 > D1 > R1

T1 > D1 > R1T1 > D1 > R1

T1 > C1 > R1

T1 > C1 > R1T1 > C1 > R1

T1 > C1

T1 > C1T1 > C1

T1 > R1

T1 > R1T1 > R1

C1 > R1

C1 > R1C1 > R1

C1 > D1 > R1

C1 > D1 > R1C1 > D1 > R1

T1 > C1 > R1

T1 > C1 > R1T1 > C1 > R1

4 Pedals

4 Pedals4 Pedals

T1 > C1 > D1 > R1

T1 > C1 > D1 > R1T1 > C1 > D1 > R1

The

TheThe

VoiceSupport Application

VoiceSupport ApplicationVoiceSupport Application

VoiceSupport is your way of getting the most from your TC-Helicon product, as well as letting your

VoiceSupport is your way of getting the most from your TC-Helicon product, as well as letting yourVoiceSupport is your way of getting the most from your TC-Helicon product, as well as letting your

product grow with firmware updates. VoiceSupport includes:

product grow with firmware updates. VoiceSupport includes:product grow with firmware updates. VoiceSupport includes:

•

••

Access to firmware updates and new features

Access to firmware updates and new featuresAccess to firmware updates and new features

•

••

Videos, artist profiles, tips & tricks

Videos, artist profiles, tips & tricksVideos, artist profiles, tips & tricks

•

••

Registration of your product

Registration of your productRegistration of your product

To access the VoiceSupport application:

To access the VoiceSupport application:To access the VoiceSupport application:

1. Download VoiceSupport from www.tc-helicon.com/voicesupport.

1. Download VoiceSupport from www.tc-helicon.com/voicesupport.1. Download VoiceSupport from www.tc-helicon.com/voicesupport.

(9)

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(10)

(11)

(12)

(13)

(14)

(15)

Quick Start Guide

VOICETONE C1

V 1.0

Visit musictribe.com to download the full manual

2 3

VOICETONE C1 VOICETONE C1

Terminals marked with this symbol carry

electrical current of sucient magnitude

to constitute risk of electric shock. Use

only high-quality professional speaker cables with ¼"

TS or twist-locking plugs pre-installed. Allother

installation or modication should be performed only

by qualiedpersonnel.

This symbol, wherever it appears, alerts

you to the presence of uninsulated

dangerous voltage inside the enclosure

- voltage that may be sucient to constitute a risk

ofshock.

This symbol, wherever it appears, alerts

you to important operating and

maintenance instructions in the

accompanying literature. Please read themanual.

Caution

To reduce the risk of electric shock, do not

remove the top cover (or the rear section).

No user serviceable parts inside. Refer servicing to

qualiedpersonnel.

Caution

To reduce the risk of re or electric shock,

do not expose this appliance to rain and

moisture.Theapparatus shall not be exposed to

dripping or splashing liquids and no objects lled

with liquids, such as vases, shall be placed on the

apparatus.

Caution

These service instructions are for use by

qualied service personnel only.

Toreduce the risk of electric shock do not perform any

servicing other than that contained in the operation

instructions. Repairshave to be performed by

qualied servicepersonnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

bladeswithonewiderthantheother.Agrounding-type

plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for

your safety. Ifthe provided plug does not t into your

outlet, consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11. Use only attachments/accessories specied

by themanufacturer.

12. Use only with the cart,

stand, tripod, bracket, or table

specied by the manufacturer,

orsold with the apparatus.When

a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualied service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has beendropped.

15. The apparatus shall be connected to a MAINS

socket outlet with a protective earthing connection.

16. Where the MAINS plug or an appliance coupler

is used as the disconnect device, the disconnect

device shall remain readily operable.

17. Correctdisposalofthisproduct:

This symbol indicates that this

product must not be disposed of

with household waste, according

to the WEEE Directive (2012/19/EU)

and yournational law.This product

should be taken to a collection center licensed for the

recycling of waste electrical and electronic equipment

(EEE). The mishandling of this type of waste could

have a possible negative impact on the environment

and human health due to potentially hazardous

substances that are generally associated with EEE.

At the same time, your cooperation in the correct

disposal of this product will contribute to the ecient

use of natural resources. For more information about

whereyoucan takeyourwasteequipmentfor recycling,

please contact your local city oce, or your household

waste collection service.

18. Do not install in a conned space, such as

a book case or similar unit.

19. Do not place naked ame sources, such as

lighted candles, on the apparatus.

20. Pleasekeeptheenvironmental aspects of battery

disposal in mind. Batteries must be disposed-of at

a battery collection point.

21. This apparatus may be used in tropical and

moderate climates up to 45°C.

MusicTribe acceptsno liability for anyloss whichmay

besuered by anypersonwhorelieseitherwhollyorin

part upon any description, photograph, or statement

containedherein.Technicalspecications, appearances

and other information are subject to change without

notice. All trademarks are the property of their

respective owners. Midas, Klark Teknik, Lab Gruppen,

Lake, Tannoy, Turbosound, TC Electronic, TC Helicon,

Behringer, Bugera, Oberheim, Auratone and

Coolaudio are trademarks or registered trademarks

For the applicable warranty terms and conditions

and additional information regarding MusicTribe’s

Limited Warranty, please see complete details online

at musictribe.com/warranty.

Important Safety Instructions

8 9

VOICETONE C1 VOICETONE C1

Vorsicht

Die mit dem Symbol markierten

Anschlüsse führen so viel Spannung,

dassdie Gefahr eines Stromschlags besteht.

Verwenden Sie nur hochwertige, professionelle

Lautsprecherkabel mit vorinstallierten 6,35 mm

MONO-Klinkensteckern oder Lautsprecherstecker mit

Drehverriegelung. Alle anderen Installationen oder

Modikationen sollten nur von qualiziertem

Fachpersonal ausgeführt werden.

Achtung

Um eine Gefährdung durch Stromschlag

auszuschließen, darf die

Geräteabdeckung bzw. Geräterückwandnicht

abgenommen werden. ImInnern des Geräts benden

sich keine vom Benutzer reparierbaren Teile.

Reparaturarbeiten dürfen nur von qualiziertem

Personal ausgeführtwerden.

Achtung

Um eine Gefährdung durch Feuer bzw.

Stromschlag auszuschließen, darf dieses

Gerät weder Regen oder Feuchtigkeit ausgesetzt

werden noch sollten Spritzwasser oder tropfende

Flüssigkeiten in das Gerät gelangen können. Stellen

Sie keine mit Flüssigkeit gefüllten Gegenstände,

wie z. B.Vasen, aufdasGerät.

Achtung

Die Service-Hinweise sind nur durch

qualiziertes Personal zu befolgen.

Umeine Gefährdung durch Stromschlag zuvermeiden,

führen Sie bitte keinerlei Reparaturen an dem Gerät

durch, dienicht in der Bedienungsanleitung

beschrieben sind.Reparaturen sind nur von

qualiziertem Fachpersonaldurchzuführen.

1. Lesen Sie diese Hinweise.

2. Bewahren Sie diese Hinweise auf.

3. Beachten Sie alleWarnhinweise.

4. Befolgen Sie alle Bedienungshinweise.

5. Betreiben Sie das Gerät nicht in der Nähe

vonWasser.

6. Reinigen Sie das Gerät mit einem trockenen Tuch.

7. Blockieren Sie nicht die Belüftungsschlitze.

Beachten Sie beim Einbau des Gerätes die

Herstellerhinweise.

8. Stellen Sie das Gerät nicht in der Nähe von

Wärmequellen auf. Solche Wärmequellen sind z. B.

Heizkörper, Herde oder andere Wärme erzeugende

Geräte (auch Verstärker).

9. Entfernen Sie in keinem Fall die

Sicherheitsvorrichtung von Zweipol- oder geerdeten

Steckern. Ein Zweipolstecker hat zwei unterschiedlich

breite Steckkontakte. Ein geerdeter Stecker hat zwei

Steckkontakte und einen dritten Erdungskontakt.

Derbreitere Steckkontakt oder der zusätzliche

Erdungskontakt dient Ihrer Sicherheit. Falls das

mitgelieferte Steckerformat nicht zu Ihrer Steckdose

passt, wenden Sie sich bitte an einen Elektriker, damit

die Steckdose entsprechend ausgetauscht wird.

10. Verlegen Sie das Netzkabel so, dass es vorTritten

und scharfen Kanten geschützt ist und nicht

beschädigt werden kann. Achten Sie bitte

insbesondere im Bereich der Stecker,

Verlängerungskabel und an der Stelle, an der das

Netzkabel das Gerät verlässt,

aufausreichendenSchutz.

11. Das Gerät muss jederzeit mit intaktem

Schutzleiter an das Stromnetz angeschlossen sein.

12. Sollte der Hauptnetzstecker oder eine

Gerätesteckdose die Funktionseinheit zum Abschalten

sein, muss diese immer zugänglich sein.

13. Verwenden Sie nur Zusatzgeräte/Zubehörteile,

dielaut Hersteller geeignet sind.

14.

Verwenden

SienurWagen,

Standvorrich-tungen, Stative, Halter

oderTische,dievomHersteller

benannt oderimLieferumfang des

Geräts enthalten sind. FallsSieeinen

Wagen benutzen, seienSievorsichtigbeim Bewegen

derWagen-Gerätkombination,umVerletzungendurch

Stolpern zuvermeiden.

15. Ziehen Sie den Netzstecker bei Gewitter oder

wenn Sie das Gerät längere Zeit nicht benutzen.

16. Lassen Sie alleWartungsarbeiten nur von

qualiziertem Service-Personal ausführen.

EineWartung ist notwendig, wenn das Gerät in

irgendeinerWeise beschädigt wurde (z. B.

Beschädigung des Netzkabels oder Steckers),

Gegenstände oder Flüssigkeit in das Geräteinnere

gelangt sind, das Gerät Regen oder Feuchtigkeit

ausgesetzt wurde, das Gerät nicht ordnungsgemäß

funktioniert oder auf den Boden gefallen ist.

17. Korrekte Entsorgung dieses

Produkts: Dieses Symbol weist

darauf hin, das Produkt

entsprechend derWEEE Direktive

(2012/19/EU) und der jeweiligen

nationalen Gesetze nicht

zusammen mit Ihren Haushaltsabfällen zu entsorgen.

DiesesProdukt sollte bei einer autorisierten

Sammelstelle für Recycling elektrischer und

elektronischer Geräte (EEE) abgegeben werden.

Wegen bedenklicher Substanzen, diegenerell mit

elektrischen und elektronischen Geräten in

Verbindung stehen, könnte eine unsachgemäße

Behandlung dieser Abfallart eine negative

Auswirkung auf Umwelt und Gesundheit haben.

Gleichzeitig gewährleistet Ihr Beitrag zur richtigen

Entsorgung dieses Produkts die eektive Nutzung

natürlicher Ressourcen. Fürweitere Informationen zur

Entsorgung Ihrer Geräte bei einer Recycling-Stelle

nehmen Sie bitte Kontakt zum zuständigen

städtischen Büro, Entsorgungsamt oder zu Ihrem

Haushaltsabfallentsorgerauf.

18. Installieren Sie das Gerät nicht in einer beengten

Umgebung, zum Beispiel Bücherregal oder ähnliches.

19. Stellen Sie keine Gegenstände mit oenen

Flammen, etwa brennende Kerzen, auf das Gerät.

20. Beachten Sie bei der Entsorgung von Batterien

den Umweltschutz-Aspekt. Batterien müssen bei

einer Batterie-Sammelstelle entsorgt werden.

21. Dieses Gerät ist in tropischen und gemäßigten

Klimazonen bis 45° C einsetzbar.

MusicTribeübernimmt keineHaftung fürVerluste,

diePersonen entstandensind, diesich ganz oder

teilweise auf hier enthaltene Beschreibungen,Fotos

oder Aussagen verlassen haben.Technische Daten,

Erscheinungsbild und andere Informationen können

ohne vorherige Ankündigung geändertwerden.Alle

WarenzeichensindEigentumderjeweiligen Inhaber.

Midas,KlarkTeknik, Lab Gruppen, Lake,Tannoy,

Turbosound,TC Electronic, TC Helicon, Behringer,

Bugera

, Oberheim, Auratone

und Coolaudio sind

WarenzeichenodereingetrageneWarenzeichen der

Die geltenden Garantiebedingungen und zusätzliche

Informationen bezüglich der von MusicTribe

gewährten beschränkten Garantie nden Sie online

untermusictribe.com/warranty.

Wichtige Sicherhteitshinweise

20 21

VOICETONE C1 VOICETONE C1

(EN) Controls

(1) Key Selector – Selects a major key for pitch correction. CH setting

is either Chromatic (no Instrument) or Chords (Instrument connected).

(2) Mic Input Level Control

(3) Ground Lift – Press the button inward

if you experience buzz and hum.

(4) Instrument Thru – Send a copy of the instrument

input signal to an amp or PA.

(5) Eect Active LED

(6) Eect On/OFootswitch

(7) USB – Accepts the included mini-USB cable

for rmware update.

(8) Power – Connect the included

12 V / >= 400 mA power supply.

(9) Input Level LED – Green = signal, red = clip.

(10) Mic Control – Use the optional MP-75 mic (button in = on).

(11) Guide Instrument Input

(12) Gender – Adjust your vocal biology between male and female.

(13) O/Hard – Adjust the pitch correction attack from natural to robotic.

(14) Out – Connect to a mixer or powered speaker.

(15) Mic – Connect your microphone.

(ES) Controles

(1) Key Selector – Selecciona una tecla principal para la corrección

de tono. El ajuste de CH es cromático (sin instrumento) o acordes

(instrumento conectado).

(2) Mic Input Level Control

(3) Ground Lift – Presione el botón hacia adentro si experimenta

zumbidos y zumbidos.

(4) Instrument Thru – Envíe una copia de la señal de entrada

del instrumento a un amplicador o PA.

(5) Eect Active LED

(6) Eect On/OFootswitch

(7) USB – Acepta el cable mini-USB incluido para

la actualización del rmware.

(8) Power – Conecte la fuente de alimentación

de 12 V /> = 400 mA incluida.

(9) Input Level LED – Verde = señal, rojo = clip.

(10) Mic Control – Utilice el micrófono MP-75 opcional

(botón de entrada = encendido).

(11) Guide Instrument Input

(12) Gender – Ajusta tu biología vocal entre

hombre y mujer.

(13) O/Hard – Ajusta el ataque de corrección de tono de natural a robótico.

(14)

Out –Conectar aun mezclador oaltavozautoamplicado.

(15) Mic – Conecta tu micrófono.

(FR) Réglages

(1) Key Selector –Sélectionne une touche majeure pour la correction

de hauteur. Le réglage CH est soit Chromatique (sans instrument),

soit Accords (Instrument connecté).

(2) Mic Input Level Control

(3) Ground Lift – Appuyez sur le bouton vers l’intérieur si vous

ressentez un bourdonnement et un bourdonnement.

(4) Instrument Thru – Envoyer une copie du signal d’entrée

de l’instrument à un ampli ou une sono.

(5) Eect Active LED

(6) Eect On/OFootswitch

(7) USB – Accepte le câble mini-USB inclus pour

la mise à jour du micrologiciel.

(8) Power – Connectez l’alimentation

12 V /> = 400 mA incluse.

(9) Input Level LED – Vert = signal, rouge = clip.

(10) Mic Control – Utilisez le micro MP-75 en option (bouton in = on).

(11) Guide Instrument Input

(12) Gender – Ajustez votre biologie vocale entre homme et femme.

(13) O/Hard – Ajustez l’attaque de correction

de hauteur de naturelle à robotique.

(14) Out – Connectez-vous à une table de mixage ou à un

haut-parleur amplié.

(15) Mic – Connectez votre microphone.

(DE) Bedienelemente

(1) Key Selector – Wählt eine Haupttaste für die Tonhöhenkorrektur aus.

Die CH-Einstellung ist entweder Chromatisch (kein Instrument) oder

Akkorde (Instrument angeschlossen)..

(2) Mic Input Level Control

(3) Ground Lift – Drücken Sie die Taste nach innen, wenn Sie Summen

und Brummen bemerken.

(4) Instrument Thru – Senden Sie eine Kopie des

Instrumenteneingangssignals an einen Verstärker oder eine PA.

(5) Eect Active LED

(6) Eect On/OFootswitch

(7) USB – Akzeptiert das mitgelieferte Mini-USB-Kabel für

das Firmware-Update.

(8) Power – Schließen Sie das mitgelieferte

12 V /> = 400 mA Netzteil an.

(9) Input Level LED – Grün = Signal, Rot = Clip.

(10) Mic Control – Verwenden Sie das optionale MP-75-Mikrofon

(Taste in = ein).

(11) Guide Instrument Input

(12) Gender – Passen Sie Ihre Stimmbiologie

zwischen Mann und Frau an.

(13) O/Hard – Stellen Sie den Tonhöhenkorrekturangrivon natürlich

auf robotergesteuert ein.

(14) Out – Schließen Sie es an einen Mixer oder Aktivlautsprecher an.

(15) Mic – Schließen Sie Ihr Mikrofon an.

20.09.23, 16:26TC Helicon | Product | VOICETONE C1

Seite 3 von 7https://www.tc-helicon.com/product.html?modelCode=P0DDY

Design

Size Height: 5.4 inches (140 mm)

Width: 3.5 inches (90 mm)

Depth: 2.3 inches (60 mm)

Weight Weight: 0.92 lb. (0.42 kg)

Construction Two part dies cast metal

Rubberized base

Connections

Analog Inputs Connectors, balanced: Mic.: XLR

Mic Input Level @ 0 dBFS: -42dBu

– just set the key and go – or use

the guitar input. It ends with the

wildly popular pitch-gliding

HardTune e!ect. A twist of the

gender knob really gets you

sounding like an alien with some

fascinating biological choices...

It’s Just this Simple...

""" •""" Plug in your mic, plug your

pedal into the mixer & set the gain

""" •""" Turn on the e!ect

""" •""" (That’s it)

Of course, you can always change

the style or the amount of

correction, but you shouldn’t need

the manual – unless you’re making

a $re!

Speci$cation

Show less

Products Support Downloads

Buy

20.09.23, 16:26TC Helicon | Product | VOICETONE C1

Seite 4 von 7https://www.tc-helicon.com/product.html?modelCode=P0DDY

Mic Input Level @ 0 dBFS: -42dBu

to +1dBu

EIN @ Max Mic Gain Rg = 150

Ohm: -126 dBu

Mic input SNR: >104 dB

Phantom Power: 24V (always on)

Guitar Input impedance: 1 MOhm

Guitar Input Level @ 0 dBFS: -7

dBU to 17 dBu

Guitar Input SNR: >115dB

Dynamic Range: >104 dB, 20 Hz

to 20 kHz

Frequency Response: +0/-0.3 dB,

20 Hz to 20 kHz

Analog Outputs Output Impedance, Bal./Unbal.:

200/100 Ohm

Output Full Scale: +1 dBu

Dynamic Range: >104 dB, 20 Hz

to 20 kHz

Frequency Response: +0/-0.3 dB,

20 Hz to 20 kHz

Control USB for $rmware and control

Mic Control using TC Helicon MP-

Safety And Regulations

Power Power Supply (Supplied): 12V .4A

Power Consumption: 5.6W

Safety EMC – Complies with EN 55103-1

and EN 55103-2 FCC part 15, Class

B, CISPR 22, Class B

Safety – certi$ed to IEC 65, EN

60065, UL6500 and CSA IEC 65,

EN 60065, UL6500 and CSA

20.09.23, 16:26TC Helicon | Product | VOICETONE C1

Seite 5 von 7https://www.tc-helicon.com/product.html?modelCode=P0DDY

Environment Operating Temperature: 32°F to

122°F (0°C to 50°C)

Storage Temperature: -22°F to

167°F (-30°C to 70°C)

Humidity: Max. 90 % non-

condensing

What's in the box? Region speci$c power supply

USB cable

User guide

Videos

Video Coming Soon

Popular Music Pedal manuals by other brands

Mesa/Boogie

Mesa/Boogie Three Channel Dual & Triple Rectifier Solo... owner's manual

Dunlop

Dunlop MXR Phase 90 Operation manual

KMA

KMA QUEEQUEG 2 quick start guide

Wampler

Wampler Plextortion. Distortion manual

Electro-Harmonix

Electro-Harmonix XO STEREO CLONE THEORY manual

Yamaha

Yamaha DFP7210 owner's manual

Rocktron

Rocktron HUSH 2X instruction manual

aion

aion Flare manual

Velleman

Velleman EXTRADRIVE Assembly manual

GOD CITY INSTRUMENTS

GOD CITY INSTRUMENTS Socialist Jr. V1.1 Build guide

Alesis

Alesis Xguitar Programming chart

FuzzDog

FuzzDog JenFuzz instructions

Behringer

Behringer BASS OVERDRIVE BOD400 manual

Behringer

Behringer V-TONE ACOUSTIC DRIVER DI ADI21 Safety instructions

Danelectro

Danelectro Cool Cat V2 Drive CO-2 instructions

Diago

Diago Powerstation manual

CICOGNANI ENGINEERING

CICOGNANI ENGINEERING Pompeii PE603 user manual

MORLEY

MORLEY POBES manual

TC-Helicon VoiceTone C1 User manual

Popular Music Pedal manuals by other brands