TCL 43P615 User manual

43P615/50P615/55P615/65P615

1
Table of Contents
Chapter 1: Introduction
Precautions ............................................................... 2
Warning ................................................................... 2
Product .................................................................... 2
Power and Plug ....................................................... 2
Power Cord and Signal Cable ................................. 2
Use Environment ..................................................... 2
Cleaning................................................................... 2
Sockets...................................................................... 3
Remote Control Functions ......................................4
Chapter 2: Getting Started
Switching On ............................................................5
Switching Off ............................................................5
Network Connection ................................................6
TV Button ..................................................................7
Initial Setup ...............................................................7
Chapter 3: Basic TV Operations
Accessing Channels .................................................8
Watching Connected Devices ..................................8
Adjusting Volume ......................................................8
Accessing Smart TV Homepage ..............................8
Accessing TCL Channel ...........................................8
Using System Settings menu ..................................8
Using TV Options menu ...........................................8
Chapter 4: Using More of Your TV
Installing Channels ...................................................9
Using Subtitles ..........................................................9
Enabling Subtitle Languages on Digital TV Channels .....9
Selecting a Subtitle Type on Digital TV Channels ........9
Turning On/Off Subtitles..............................................9
Using Teletext ..........................................................10
Selecting Decoding Page Language .....................10
Digital Teletext Language .......................................10
Using Instant Power On .........................................10
Network Wake Up ...................................................10
T-Link .......................................................................10
Enabling or Disabling T-Link ..................................10
Using Auto Power On ............................................10
Using Auto Standby ...............................................10
Using EPG (Electronic Program Guide) ...............10
Bluetooth Function .................................................11
Time Shift ................................................................11
PVR (Personal Video Recorder) ............................11
T-cast .......................................................................12
Reset Shop ..............................................................12
NETFLIX Settings ...................................................12
Password in Parental Control ...............................12
Chapter 5: Other Information
Problems & Solutions ............................................13
Troubleshooting .....................................................14
Legal Statement ......................................................15
Mount the Stand......................................................16
Licence ....................................................................17
Common Interface ....................................................9
Using the Common Interface Function .....................9
Accessing Common Interface Services ...................9

2
IntroductionChapter 1
Precautions
Read all of the instructions before operating the set.
Keep these instructions well for future use.
Warning
Never place a television set in an unstable location. A
television set may fall, causing serious personal injury
or death. Many injuries, particularly to children, can be
avoided by taking simple precautions such as:
-Using cabinets or stands recommended by the
manufacturer of the television set.
-Only using furniture that can safely support the
television set.
-Ensuring the television set is not overhanging the
edge of the supporting furniture.
-Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television set to
a suitable support.
-Not placing the television set on cloth or other
materials that may be located between the television
set and supporting furniture.
-Educating children about the dangers of climbing on
furniture to reach the television set or its controls.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
N
This symbol indicates that the fuse may
be in the neutral, and that the mains shall
be disconnected to deenergize the phase
conductors.
If an outside antenna or cable system is connected to
the product, be sure the antenna or cable system is
grounded by a skilled person so as to provide some
protection against voltage surges and built-up static
charges.
If your existing television set is being retained and
relocated, the same considerations as above should be
applied.
Product
• Do not block or cover the ventilation openings on the
back cover.
• Do not push objects of any kind into this unit through
the cabinet slots as they could touch the current
electric shock, or damage to the unit.
• Do not attempt to open the cabinet as this may cause
damage. There are no parts inside you can service by
•
may scratch or mar the TV screen.
• Do not impact the TV screen with hard pressure as
this may damage the TV screen severely.
Power and Plug
• Unplug the set under the following conditions:
-If the set will not be used for a long period of time.
-If the power cord or the power outlet/plug is
damaged.
-Follow the instructions to install and adjust the
product. Adjust those controls that are covered in
these operating instructions as improper adjustment
of other controls may result in damage. If this
happens, unplug the set and refer to the service
personnel.
-If the set is subject to impact or has been dropped
and the cabinet has been damaged.
• Where the mains plug or an appliance coupler is used
as disconnect device, the disconnect device shall
remain readily operable.
(*Where an all-pole mains switch is used as the
disconnect device, the switch shall remain readily
operable.)
Power Cord and Signal Cable
• Do not allow anything to rest on or roll over the power
cord and the signal cable.
• Protect the power cord and the signal cable from
being trampled.
• Do not overload the power cord or the power outlet.
• Do not expose the power cord and the signal cable to
moisture.
Use Environment
• Do not place the set on an unstable cart, stand, or
table.
• Place the set on a place that allows good ventilation.
• Do not use the set near damp, and cold areas.
• Do not expose theset toexcessive heat such as direct
such as lighted candles, should be placed on the
apparatus.
• Do not expose the set to dripping or splashing and
placed on the apparatus.
• Do not use the set in dusty environments.
• Operating Temperature: 5°C to 35°C (41°F to 95°F)
Operating Humidity: 20% to 80%, non-condensing
Storage Temperature: -15°C to 45°C (5°F to 113°F)
Storage Humidity: 10% to 90%, non-condensing
Cleaning
• Dust the set by wiping the screen and the cabinet with
a soft, clean cloth or some special liquid cleaner.
• Do not apply excessive force to the screen when
cleaning.
• Do not use water or other chemical cleaner to clean
the screen as this may damage the surface of the TV
screen.
All other safety instructions about our TV sets are
also applicable here. (Note: Certain TV model is not
designed to be mounted to the wall.)

3
Introduction
Sockets
Note: The location and names of the sockets on the TV may vary according to TV model, and not all sockets
available on all models.
LAN
This socket can be used to connect to external modem or network
access equipment.
HDMI, HDMI (Service port) or HDMI (ARC) socket (input)
used to connect a Blu-ray player, PC with a compatible video
digital satellite decoder. This socket provides an uncompressed
digital connection that carries both video and audio data by way
of an integrated mini-plug cable.
Antenna/Cable input socket
This socket can be used to connect the outside aerial or cable
network.
Satellite input socket
This socket can be used to connect a coaxial cable to receive the
signal from your satellite receiver.
AV adapter socket (input)
This socket can be used to connect the attached AV adapter
cable with VIDEO and AUDIO L & R IN sockets. The AV IN
sockets can be used to connect a range of equipment, including
video recorders, camcorders, decoders, satellite receivers, DVD
players, or games consoles.
Digital audio out (Optical) socket
This socket can be used to connect a compatible digital audio
receiver.
Headphone socket (output)
This socket can be used to connect headphones or stereo
earphones.
Warning: Excessive sound pressure from earphones and
headphones can cause hearing loss.
Common interface slot
This slot can be used to watch encrypted digital TV channels by
inserting a CAM (Conditional Access Module) along with a smart
card provided by a digital TV service operator.
USB 2.0 socket (input)
This socket can be used to connect a USB 2.0 device.
Note: 1. The number of USB sockets on the TV may vary
according to TV model. 2. Only the USB 2.0 with black socket
is available for connecting a hands-free TV voice control gear
which is sold separately. Only the TCL brand gear of model
FVC* (* stands for the numbers) is compatible with this TV. For
details, please refer to your local dealer.
LAN
Antenna/
Cable input
Router / Modem
USB 2.0
Satellite
input
Common interface
Digital
audio out
(Optical)
HDMI
or HDMI
(Service port)
or HDMI
(ARC)
V L R
V L R V L R
AV adapter
HDD

4
Introduction
To pop up the virtual remote control keyboard when available.
/To control the volume.
P/To change channels.
Standby / quit standby.
Numeric buttons To enter channel numbers or a digit.
To access TCL Channel.
To display the TV settings menu.
To access the Smart TV homepage.
To display the Option menu.
/Navigation direction buttons.
OK
To return to the previous menu or quit an app.
To select input source.
-Installing Batteries
1. Push to open the back cover as illustrated.
2. Insert two AAA batteries according to the polarities marked on the battery case.
3. Replace the back cover as illustrated.
To access Окко.
To access КИНОПОИСК HD.
To access Netflix.
To access YouTube.
Note: Certain function may be accessed from the virtual remote control keyboard only,
please press button on the remote to display it and operate accordingly.
Remote Control Functions
Most of your television's functions are available via the menus that appear on the screen. The remote control(s)
Notes:
1.
appearance. 2.The remote control type may be changed without notice, please refer to the remote control attached
Google and Android TV are
trademarks of Google LLC.
How to Use the Remote Control
When using the Google Assistant button for the first time, you will be prompted to pair the
remote with the TV.
a. Keep the remote control and TV within 1 meter, please follow the on-screen guide for pairing
instructions. You can use the Google Assistant button after activating successfully.
b. The Google Assistant is only available for content search from certain apps.
c.
Set languages in the Settings to your local language or official language to enhance voice
search successfully.
21 3
with your TV. 3.Certain function may not be available for some models, e.g. GUIDE/SUBTITLE functions are only
available under DTV source. And DTV is not available for certain model. 4.
The Google Assistant is not available in
certain languages and countries.
Press the Assistant button on your remote to talk to the Google Assistant.
(Available only when the network connection works normally.)

5
Chapter 2 Getting Started
Switching On
Follow the instructions on this page on how to switch on your TV set
and the remote control before going on to following pages describing
how to use the channel set-up procedure.
1. Insert two AAA batteries in the remote control.
Precautions on using batteries:
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
- Do not expose batteries to excessive heat such as sunshine,
them, as this could cause them to leak or explode.
- Remove the batteries from the remote control if you are not using
it for a long period of time.
- Attention should be drawn to the environmental aspects of battery
disposal.
2. Connect the power cable FIRST to the television, THEN to a mains
socket. (Note: If the power cable is connected to the television,
please only connect the power cable to the mains socket.)
Your TV set should only be connected to an AC supply. It must
not be connected to a DC supply. If the plug is detached from the
cable, do not, under any circumstances, connect it to a mains
socket, as there is a risk of electric shock.
Note:
3. Connect an outside aerial to the ANTENNA IN socket at the back
of the TV set.
The aerial socket (75 OHM - VHF / UHF / cable) can be used for
Note: If you want to receive the signal from your cable or cable
box, please connect a coaxial cable to the CABLE IN socket at the
back of the TV set.
4. When powered on, the TV will be turned on directly or be in
standby mode.
If the power indicator lights up, the TV set is in standby mode.
Press the button on the remote control or on the TV set to turn
on the TV.
Switching Off
• To put the TV set into standby mode, press the button on the
remote control. The TV set remains powered up, but with low
energy consumption.
•
outlet.

6
Getting Started
Network Connection
Your TV will require an internet connection to operate all functions. Data usage charges may apply.
Please refer to your Internet Service Provider (ISP) for additional information.
To access the Internet, you must subscribe to high speed broadband Internet service with your Internet service
provider (ISP).
Your TV can be connected to your home network in two ways:
• Wired, using the RJ45 (LAN) connector on the back panel.
• Wireless, using the internal wireless and your home wireless network.
Note:Instructions below are just the usual ways to connect your TV to the wired or wireless network. The connection
home network, please refer to your ISP.
Connecting to a Wired Network
To connect to a wired network:
1. Ensure you have:
• An Ethernet cable long enough to reach your TV
• A router or modem with an available Ethernet
port
• A high-speed Internet connection
• An Ethernet (LAN) port on the back of the TV
2. Connect your Ethernet cable to the router and to
the Ethernet port on the back of the TV.
3. Use the Network & Internet menu to configure the
TV.
Connecting to a Wireless Network
To connect to a wireless network:
1. Ensure you have:
• A router broadcasting a high-speed wireless
signal
• A high-speed Internet connection
2. Use the Network & Internet menu to configure the
TV.
Note:Please follow below steps to enter the Network & Internet menu.
1. Press on the remote control to display the Smart TV homepage.
2. Press /to move the cursor to (Settings) on the right top of the screen and press OK to enter the
system settings.
3. Press / to select Network & Internet, then press OK to enter the submenu and follow the on-screen
guidance to set up your network.
Router
Modem Internet
LAN port
Modem Internet
Wireless router

7
Getting Started
TV Button
If the batteries in your remote control are run down, you can use the button(s) on your TV set.
There is only one button on the TV set, it may work just as Power on/Standby button, or as a multi-function
controller.
You can turn on the TV by pressing button at the bottom of the TV.
While the TV is on, the multi-function menu appears by pressing button on the TV set. More information
.
• Press to move the highlight to the next function selection
•
Note:
You can follow the on-screen guide to operate.
Figures and illustrations are provided for reference only and may vary depending on the model.
Initial Setup
Welcome wizard appears, which guides you through the initial setup
connecting to the network, and more. During each step, either make a choice or skip the step. If you skip a step,
you can perform the setup later from the settings menu.

8
Chapter 3 Basic TV Operations
Accessing Channels
remote control to scroll through the channels.
Using the OK button: press the OK button to display
OK to select
channels.
Using the P / buttons: press the P / buttons on
the remote control to scroll through the channels.
Using the button: press to display the virtual
remote control keyboard, then you can use the numeric
buttons button to operate accordingly.
Watching Connected Devices
Press on the remote control to display the source
list. Press /to select TV or other input sources and
press OK
You can also press on the remote control to display
the homepage, press /to move the cursor to
the (Inputs) area on the right top of the screen, and
press OK to enter. Then press /and OK to select
the input source.
Adjusting Volume
Press the /buttons on the remote control to
increase or decrease the volume.
Accessing Smart TV Homepage
Allows you to enjoy Internet Applications (Apps) and
specially adapted Internet websites, and perform system
settings for your TV. You can make controlling with the
TV remote control.
WARNING:
• Smart TV
applications.
• Slow responses and/or interruptions may occur,
depending on your network conditions.
• If you experience a problem using an application,
please contact the content provider.
• According to circumstances of the content provider, an
application’s updates or the application itself may be
discontinued.
• Depending on your country's regulations, some
applications may have limited service or not be
supported.
• Changes in application content may be made without
prior notice by the service provider.
1. Press on the remote control to display the Smart
TV homepage.
2. Press and OK to enter the desired apps,
functions or settings.
3. Press to return to the homepage.
4. To exit the homepage, press on the remote
control to display the source list, and then press
/and OK to select your desired input source.
Note: Since the connection with Internet takes time, it’s
recommended that you wait a few minutes to use
the Smart TV feature after activation of TV from
standby.
Accessing TCL Channel
Allows you to enjoy more VOD (Video on Demand)
contents or feature applications.
1. Press on the remote control to access TCL Channel,
or access through the TCL Channel icon on homepage.
2. Press to return to the homepage.
Note: UI layout for TCL Channel may vary according to
models and countries.
Using System Settings menu
Allows you to not only adjust device settings, such
as Network, Power and Apps, etc., but also set
preferences.
1. Press on the remote control to display the Smart
TV homepage.
2. Press to move the cursor to
(Settings)
on the right top of the screen and press OK to enter
the system settings.
3. Press to choose the items and
press OK to enter.
4. Press to return to previous interface.
Using TV Option menu
The follow instructions introduce how to operate and
access the options menu of the TV under TV mode with
the remote control.
Note: Some of the functions might be unavailable in
certain input sources. And for some models,
certain options are not available.
To access the menu system:
1. Press on the remote control to display the menu.
2. Press /to select the desired item, then press
to enter the corresponding submenu.
3. In submenus, press /to select menu options,
then press to enter the option list, the
adjustment interface, or the corresponding submenu.
4. Press to exit.
Notes:
-Press on the remote control, select Settings and
press OK to enter the TV settings menu.
-Setting LED motion clear on will make fast moving
images clearer by controlling the LED backlight, but
LED motion clear off.

9
1. Following the directions printed on the CAM, gently
insert the module into the common interface slot on
the TV.
2. Push the module in as far as it will go.
3. Turn on the TV and wait for the common interface
function to be activated. This may take several
minutes.
Note: Do not remove the CAM from the slot.
Removing the module will deactivate the
digital services.
Accessing Common Interface Services
After inserting and activating the CAM, press on the
remote control, select Channel > Common Interface
and press OK/ to enter. This menu option is only
available if the CAM is correctly inserted and activated.
On-screen applications and content are provided by
your digital TV service operator.
Note: This feature is only available under DTV source.
Using Subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T/DVB-T2/
DVB-C/DVB-S/DVB-S2 digital broadcasts. With digital
broadcasts, you have the additional option of selecting a
preferred subtitle language.
Note: Some options are available only when Subtitle is
set to on.
Turning On/Off Subtitles
1. Press on the remote control, select Channel >
Subtitle and press to enter.
2. Select the Subtitle option, and press OK to toggle
between on or off.
3. Press to close the menu.
Enabling Subtitle Languages on Digital TV
Channels
1. Press on the remote control, select Channel >
Subtitle > Digital subtitle language 1st and press
to enter.
2. Press /to select a subtitle language as your
preferred language and press OK
3. Press /to select Digital subtitle language 2nd
and press to enter.
4. Press /to select a secondary subtitle language
and press OK
5. Press to close the menu.
Selecting a Subtitle Type on Digital TV
Channels
Installing Channels
This section describes how to search and store
channels automatically. This may be done in any of the
cases below:
-you are prompted that there are no channels in TV
mode;
-you want to update your channels.
1. In TV mode, press
on the remote control and
select Channel > Channel scan. Press OK
enter.
2. The TV installs and arranges channels according
Country/Region, and press OK
the default password 1234 or your own password in
case you have changed the password in the System
> Lock
region and press OK to confirm.
3. Automatic search and press
OK
4. Tuner mode
select Cable, Antenna or Satellite. (Note: Satellite
option is available only in selected models.)
5.
configure.
6.
Search and press OK to start scanning channels.
7. The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you wish to hide or swap channels,
press
on the remote control, select Channel >
Channel organizer and press OK
Note: If the channel search retrieved only the analogue
channels it could be caused by poor broadcasting
and therefore is not covered by manufacturer
warranty. Manufacturers cannot be held
responsible for lack of or poor broadcasting in
some areas.
Common Interface
(* not available for some models)
Encrypted digital TV channels can be decoded with a
Conditional Access Module (CAM) and a card provided
by a digital TV service operator.
The CAM may enable several digital services,
depending on the operator and services you choose
(for example, pay TV). Contact your digital TV service
operator for more information about services and terms.
Using the Common Interface Function
CAM. Be sure to follow the instructions described
below. Wrong insertion of a CAM may damage both
the module and your TV.
Chapter 4 Using More of Your TV

10
Using More of Your TV
such as YouTube, has been installed into the
controller;
4. Networked standby is set to On in the Network
& Internet menu under homepage by pressing
> (Settings) > Network & Internet and use
to select Networked standby and press OK to
activate.
When the TV is in networked standby mode, you can
use the app to wake up the TV remotely.
Notes:
-This feature is disabled if you press and hold the
shut the TV down
-
Before using the feature of network wake up, make
sure > (Settings) > Device Preferences >
Power > Instant power on is set to on.
Using Auto Power On
Enables the TV to automatically power on when you
power on a CEC device (e.g. DVD) with the device’s
remote. Press
OK to enable this function.
Using Auto Standby
Enables all CEC devices to automatically go to the
remote. Press OK to enable this function.
Note: The CEC functions depend on the devices
connected and it is possible that some devices
may not interoperate correctly when connected to
this TV. The user manual or the manufacturer of
the problematic devices should be consulted for
further information.
Using EPG (Electronic Program Guide)
EPG is an on-screen guide that displays scheduled
digital TV programs. You can navigate, select and view
programs.
1. Press on the remote control, select Channel >
EPG and press
to enter, the Programme Guide
OK
1. Press on the remote control, select Channel >
Subtitle > Subtitle type and press to enter.
2. OK to
Hearing impaired to display
the hearing-impaired subtitles with your selected
language.
3. Press to close the menu.
Using Teletext
Selecting Decoding Page Language
1. Press on the remote control, select Channel >
Teletext > Decoding page language and press
to enter.
2. Press /to select a proper type of language in
which Teletext will display and press OK
3. Press to close the menu.
Digital Teletext Language
On digital TV channels, depending on the broadcaster,
you may be able to enjoy a service with multiple initial
allows you to select an available language as primary
pages.
1. Press on the remote control, select Channel >
Teletext > Digital teletext language and press
to enter.
2. Press /to select a language and press OK to
3. Press to close the menu.
Using Instant Power On
It enables you to turn on your TV faster from standby
increase standby power consumption.
1. Press on the remote control to display the
homepage, Press to select (Settings) >
Device Preferences > Power > Instant power on
and press OK to toggle between on and off.
2. Press to return to the homepage.
Network Wake Up
This function allows you to turn on your TV from standby
mode via a network. To use this function, please make
sure:
1. Your TV is connected to an effective wireless home
network;
2. The desired controller, such as a smartphone, is
connected to the same network as your TV;
3. An app which supports network waking up function,
T-Link
Use this function to search for CEC devices connected
to the HDMI sockets in your TV and enable auto power
on and auto standby between the TV and CEC devices.
Enabling or Disabling T-Link
1. Press on the remote control, select System >
T-Link and press OK/►to enter.
2. Select the T-Link option, and press OK to toggle
between on or off.
3. Press to close the menu.

11
Using More of Your TV
issues you should move closer to TV or increase
space between TV and source of interferences.
PVR (Personal Video Recorder)
(* not available for some models)
Allows you to record your favourite TV programs.
Before you use the function, connect a USB drive to
menu will appear, which allows you to get information
about the current or next program playing on each
channel. Navigate through the different programmes
using the buttons on the remote control.
2. Use the related buttons shown at the bottom of the
screen to view EPG.
-
TV programmes.
• Press to display the type list of the program.
•
• Select one or more types, which you want to
highlight from the type list, press OK to select or
deselect. A checkmark will appear to the right of
the type when selected.
- Custom schedule
program, then press the RED button to set the
schedule, press OK
to select Schedule reminder or Schedule re-
cording.
- Select date: Press the GREEN
Programme filter: Programme guide filter for digital
button to select
date.
- Schedule list: Press the YELLOW button to view
your schedule list.
Note: To access the color buttons, you need to press
button on the remote control to display the
virtual remote control keyboard first.
3. Press to exit EPG.
Bluetooth Function
(* not available for some models)
Bluetooth®is a wireless technology standard for
exchanging data over short distance between Bluetooth
devices. You can connect Bluetooth audio device,
mouse or keyboard via the TV.
1. Press on the remote control to display the
homepage, Press to select (Settings) >
Remotes & Accessories and press OK to enter.
2. Select Add accessory and press OK to enter.
The TV will search nearby Bluetooth devices
automatically.
3. Select an available device, press OK and follow the
guides on the screen to connect it.
Note: Bluetooth technology (if available in your TV) uses
access points, routers or microwave ovens might
interfere with Bluetooth audio streaming. If you
face interruptions in audio reception, you should
with less interferences and if you continue to face Note: The feature is available only in selected products
Time Shift
(* not available for some models)
Note: This Option is only available when Time Shift is
set to On: press on the remote control, press ▲/▼ to
select Settings> Channel> Time shift, press OK to
turn it on.
Allows you to pause, fast forward and rewind live TV,
so you don’t have to miss any part of your favourite
programmes. Before you use the function, connect
should complete the disk setup for the USB drive.
Presson the remote control and select Time shift,
then press OK/► to confirm.
1. Follow the directions on the screen to do the disk
setup if you use time shift for the first time.
2. After the disk setup is done, time shift will start, and
the time shift menu displays on the screen.
3. For later use, press and select Time shift. Press
OK to display the time shift menu and operate
according to the on-screen prompt.
4. Press button on the remote control to stop the
time shift and exit.(
virtual remote control keyboard.)
button on the
-When the time shift menu disappears and only the
timing of the time shift remains on the screen, you
can press OK to call out the time shift menu.
Notes:
- Before you plug the USB drive to TV, make sure
you have backed up the data on the drive to avoid
unforeseen malfunction and data loss.
- We recommend that you use a USB drive with at
least 1GB free space and a disk speed faster than
5.0MB/sec.
- The bigger the USB drive free space for time shift,
the bigger the recording length.

12
Note: Make sure the smart device and your TV are
in the same home LAN (local area network) or
network segment to use TV remote function.
Reset Shop
Allows you to reset the TV to factory default settings.
1. Press on the remote control to display the
homepage, Press to select (Settings) >
Device Preferences > Reset and press OK to enter.
2. Press /to select Factory data reset and press
OK to enter. Then select Erase everything and
press OK to confirm.
3. Enter the password 1234 or the PIN according to the
on-screen prompt.
4. Select OK and press OK
5. The Initial setup wizard appears. Follow the
instructions in the section Initial setup.
NETFLIX Settings
countries. Unlimited membership is required. More
Password in Parental Control
• The default password is 1234. You can change it to a
new one.
• The super password is 0423. If you forget your code,
enter the super password to override any existing codes.
available in product or place of installation.
Feature might also be blocked by TV network due
to copyright protection (HD content, recording
protection). Please use
on the remote control
to check if the feature is available in your product.
1. Press on the remote control and select PVR.
2. Press OK Record. It starts to
record automatically.
3. Press BLUE button to access Settings and use
4. Press OK or to stop recording manually, the
recorded file will be saved. In normal operation, the
recording will stop automatically when the recording
duration expires.
Note and color buttons on the virtual
remote control keyboard.
5. In recording, the PVR mini pane will also show on
the screen to indicate the recording progress.
6. To watch the recorded program, exit PVR mode first.
Press and select PVR > PVR list, then select the
related record file. Press OK to play. (It is the same
if you record a digital radio program.)
Notes:
- This feature is available only for digital non
encrypted channels.
- Before you connect the USB drive to the TV, make
sure you have backed up the data in the drive
to avoid the loss of your important data due to
unforeseen malfunction.
- The bigger the USB drive free memory for the PVR
function, the bigger the recording length.
- If you want to change channel or signal source
during recording, store the recording data before
changing the channel or source.
- The TV cannot play files normally if the parameters
of the file exceed the limitations of the system, the
file format is not supported, the file is damaged, or
the file cannot be decoded.
- Do not disconnect the USB drive when the system
is reading a file or transmitting data, otherwise the
system or the drive may be damaged.
T-cast
T-Cast lets you enjoyplenty of videos,rich of applications,
and share great contents on large screen. It also allows
you to turn a smart device into a sophisticated remote
control, providing more features than your normal TV
remote control. You can then control your TV through
your smart device.
Follow the on-screen instructions to scan the QR code
on the TV screen and download T-Cast.
Using More of Your TV
button on the remote control.
You can directly access NETFLIX via pressing

13
Chapter 5 Other Information
6. Video stops playing midway.
-Mistakes may occur when videos are copied or
compressed, so they may automatically stop playing
during playback.
7. What should I pay attention to, when I do SW
updating?
-No power cuts when SW updating;
-Avoid any operations with your remote control when
SW updating;
-Depending on your internet connection speed, the
software updating process may take some time.
8. There are no distinct changes of TV interface
after SW updating.
-Under certain conditions, SW updating may not only
update or add new functions but also improve the
performance of the TV set, without distinct changes
of interface. Also, there may be no changes to the
user interface at all.
9. What should I do when SW updating process
stops due to a sudden power-off?
-If you do SW updating by USB, do not pluck the
USB from your TV, and restart your TV to continue
SW updating; If you do SW updating by Network,
also restart your TV and check if it is well functioned.
10. With a USB device being inserted into the TV in
advance, I am prompted that no USB devices are
detected after I access Media, why?
-There may be something wrong with your mobile
hard disk(s), damaged or with low voltage. It's
recommended to provide an additional power supply
to the hard disk(s).
11. External device cannot be recognized.
-Some external devices (e.g. webcam, smart phone,
tablet, game handle, and external wireless adapter)
may not be compatible with the TV and cannot be
supported for certain functions (nScreen, wireless
display, gesture control, face recognition, if any).
Please try a similar device. If it does not work,
contact your local dealer.
12. Voice search does not work.
-Check if your remote control has been successfully
paired with your TV.
-Check if the language setting is correct.
-Check if Google server is available and stable.
1. Fail to link to the network.
-Check if your TV is connected with the network;
-Reboot your TV;
-
if access of your router is supported. Refer to the
operation manual of your router.
-Make sure your TV is connected to a router, and
make sure your router is powered on. Check that
your router/modem has an internet connection, and
that your Ethernet cables/wireless connection is OK.
Test your connection with a computer to make sure it
is OK. Should the problem persist, contact customer
service.
2. The video could not be played smoothly.
-
the supported formats of this TV set.
-Videos downloaded from internet, or online videos.
a. It may be caused by the lower bandwidth of your
network. A high network speed is required to
handle online videos.
bandwidth.
c. Check if any other computers on the same
network are also operating, as they may be using
up bandwidth. Especially if they are downloading
or displaying on-line videos.
d. The video may not be smooth itself, it is not the
problem of your TV or network.
3. When two mobile hard disks are connected
with the TV at the same time, they will not be
recognized some times.
-All mobile hard disks consume a lot of power,
which may result in power supply problems. We
recommend inserting only one hard disk, or a low
power consumption mobile hard disk.
4. The video from a mobile hard disk (USB) is
playing with no sound.
-The audio format of the video in your mobile hard
disk is not supported by the TV player.
5. Some videos fail to play.
-The formats of the videos may not be supported
by the TV, especially videos shot by certain kinds
of cameras, generally with their private protocol of
formats, which are not compatible with your TV.
Problems & Solutions
Note:Problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-connected
TV models can disregard them.

14
Other Information
Troubleshooting
Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.
minimize the interference.
Snowy dots and interference
If the antenna is located in the fringe area of a television
signal where the signal is weak, the picture may be
marred by dots. When the signal is extremely weak,
it may be necessary to install a special antenna to
improve the reception.
1. Adjust the position and orientation of the indoor/
outdoor antenna.
2. Check the connection of antenna.
3. Fine tune the channel.
4. Try another channel. Broadcasting failure may
happen.
Ignition
Black spots or horizontal streaks appear, or the picture
from car ignition system, neon lamps, electric drills, or
other electrical appliance.
Ghost
Ghosts are caused by the television signal following
from tall buildings, hills, or other objects. Changing the
direction or position of the antenna may improve the
reception.
Radio frequency interference
This interference produces moving ripples or diagonal
streaks, and in some case, loss of contrast in the
picture. Find out and remove the radio interference
source.
* To bring you better visual experience, please remove
all labels from TV front panel and screen before use.
No picture, no sound
1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to make
sure it is working or turned on.
3. Power plug is in a bad contact with the outlet.
4. Check the signal source.
No color
1. Change the color system.
2. Adjust the saturation.
3. Try another channel. Black-white program may be
received.
Remote control does not work
1. Change the batteries.
2. Batteries are not installed correctly.
No picture, normal sound
1. Adjust the brightness and contrast.
2. Broadcasting failure may happen.
Normal picture, no sound
1. Press the button to increase volume.
2. Volume is set to mute, press the button to
restore sound.
3. Change the sound system.
4. Broadcasting failure may happen.
Unorderly ripples on the picture
It is usually caused by local interference, such as cars,
daylight lamps and hair driers. Adjust the antenna to

15
Other Information
Legal Statement
[Legal Statement] of manufacturer of this TV set
Due to the various capabilities of products featuring
the SmartTV - Services, as well as limitations in the
available content, certain features, applications, and
services may not be available on all devices or in all
territories. Some features on SmartTV may also require
additional peripheral devices or membership fees that
are sold separately. Please visit our website for more
availability. The services and availability of content
through SmartTV are subject to change from time to
time without prior notice.
All content and services accessible through this device
belong to third parties and are protected by copyright,
patent, trademark and/or other intellectual property
laws. Such content and services are provided solely
for your personal noncommercial use. You may not
use any content or services in a manner that has
not been authorized by the content owner or service
provider. Without limiting the foregoing, unless expressly
authorized by the applicable content owner or service
provider, you may not modify, copy, republish, upload,
post, transmit, translate, sell, create derivative works,
exploit, or distribute in any manner or medium any
content or services displayed through this device.
You expressly acknowledge and agree that use of the
device is at your sole risk and that the entire risk as to
satisfactory quality, performance and accuracy is with
you. The device and all third party content and services
are provided “as is” without warranty of any kind, either
express or implied. Manufacturer expressly disclaims all
warranties and conditions with respect to the device and
any content and services, either express or, implied,
including but not limited to, warranties of merchantability,
accuracy, of quiet enjoyment, and non-infringement of
third party rights. Manufacturer does not guarantee the
accuracy, validity, timeliness, legality, or completeness
of any content or service made available through this
device and does not warrant that the device, content or
services will meet your requirements, or that operation
of the device or services will be uninterrupted or error-
free. Under no circumstances, including negligence,
shall manufacturer be liable, whether in contract
or tort, for any direct, indirect, incidental, special or
consequential damages, attorney fees, expenses, or
any other damages arising out of, or in connection with,
any information contained in, or as a result of the use of
the device, or any content or service accessed by you or
any third party, even if advised of the possibility of such
damages.
Third party services may be changed, suspended,
removed, terminated or interrupted, or access may be
disabled at any time, without notice, and manufacturer
makes no representation or warranty that any content
or service will remain available for any period of time.
Content and services are transmitted by third parties
by means of networks and transmission facilities over
which manufacturer has no control. Without limiting the
generality of this disclaimer, manufacturer expressly
disclaims any responsibility or liability for any change,
interruption, disabling, removal of or suspension of any
content or service made available through this device.
Manufacturer may impose limits on the use of or access
to certain services or content, in any case and without
notice or liability. Manufacturer is neither responsible nor
liable for customer service related to the content and
services. Any question or request for service relating to
the content or services should be made directly to the
respective content and service providers.

16
Other Information
Notes:
• If the table stand has been assembled, just ignore the following instructions.
• Follow the instructions accordingly based on the table stand supplied to you.
• Graphics contained within this publication are for representation only.
•
Keep the screws and plastic parts away from grease and organic solvents to avoid damage, especially
during the assembly process.
•
During installation, lay some soft materials below the screen to avoid scratch and damage to the screen.
•
When the TV faced down, do not impact the screen with sharp edges to avoid scratching the screen.
• If you want to mount the TV to the wall, please purchase an appropriate wall mount bracket.
Mount the Stand
Note: Make sure the installation direction of table stand is the same as illustrated.

17
Other Information
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio,
and the double-D symbol are trademarks of Dolby Laboratories.
* Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Licence

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
Рисунки и иллюстрации в настоящем руководстве пользователя представлены только для справки и
могут отличаться от фактического внешнего вида устройства. Конструкция и характеристики устройства
могут быть изменены без предварительного уведомления.
ТЕЛЕВИЗОР ЦВЕТНОГО ИЗОБРАЖЕНИЯ ЖИДКОКРИСТАЛЛИЧЕСКИЙ
43P615/50P615/55P615/65P615

1
Содержание
Глава 1: Введение
Меры предосторожности ......................................2
Предупреждение ....................................................2
Изделие ..................................................................2
Питание...................................................................2
Шнур питания и сигнальный кабель .....................2
Условия эксплуатации ...........................................2
Очистка ...................................................................2
Разъемы ...................................................................3
Функции пульта ДУ .................................................4
Глава 2: Начало работы
Включение ............................................................... 5
Выключение ............................................................ 5
Сетевое подключение ............................................ 6
Кнопка TV ................................................................. 7
Начальная настройка ............................................. 7
Глава 3: Основные операции
Доступ к каналам ................................................... 8
Просмотр подключенных устройств .................. 8
Регулировка громкости ......................................... 8
Доступ к главной странице Smart TV ................. 8
Доступ к TCL Channel .................................................8
Использование меню настроек системы .......... 8
Использование меню параметров телевизора ..9
Глава 4: Другие функции телевизора
Настройка каналов ................................................10
Общий интерфейс .................................................10
Использование функции стандартный интерфейс
................................................................................10
Доступ к услугам общего интерфейса .................10
Использование субтитров ...................................10
Включение/выключение субтитров .....................10
Активация языка субтитров для цифровых
каналов ..................................................................11
Выбор типа субтитров для цифровых
телевизионных каналов .......................................11
Использование телетекста .................................. 11
Выбор языка страницы декодирования ............. 11
Язык цифрового телетекста ................................ 11
Функция быстрого включения ........................... 11
Включение по сети ............................................... 11
T-Link ....................................................................... 11
Подключение и отключение функции T-Link ...... 12
Автоматическое включение ................................ 12
Автоматический переход в спящий режим ........ 12
EPG (электронная программа передач) ............ 12
Функция Bluetooth ................................................ 12
Сдвиг времени ...................................................... 13
PVR (Видеомагнитофон) ...................................... 13
T-cast ....................................................................... 14
Сброс настроек ..................................................... 14
................................................... 14
Пароль для родительского контроля ............... 14
Глава 5: Прочая информация
Проблемы и решения ........................................... 15
Выявление и устранение проблем .................... 16
Юридическое заявление .....................................17
................................................ 18Монтаж подставки
............................. 19Texнические характеристики