Teac SL-D910 User manual

SL-D910
AM/FM STEREO DIGITAL
RADIO WITH CD PLAYER
NOTES CONTENTS
1 SAFETY INFORMATION ........................................................2
2 SPECIFICATIONS ........................................................................3
3 ADJUSTMENT AND CHECK ..............................................4
4 EXPLODED VIEW AND PARTS LIST...........................7
5 PC BOARDS AND PARTS LIST ..................................... 19
6 WIRING DIAGRAM ................................................................... 29
7 INCLUDED ACCESSORIES............................................... 31
PC board shown are viewed from parts side.
The parts with no reference number or no parts number
in the exploded views are not supplied.
As regards the resistors and capacitors, refer to the
circuit diagrams contained in this manual.
Parts marked with this sign are safety critical
components. they must be replaced with identical
components - refer to the appropriate parts list and
ensure exact replacement.
Parts of [ ] mark can be used only with the version
designated.
[UK]
- [UK]; [EUR] - Europe
!

2
SL-D910
1 SAFETY INFORMATION
Optical pickup:
Type : KSM-213CDM
Manufacturer : SANY CORPORATION OF HONG KONG LIMITED
Laser output : Less than 0.5mW on the objective lens
Wavelength : 760-800nm

4
SL-D910
3 ADJUSTMENTS AND CHECKS
3-1 TUNER SECTION
Use a screwdriver with a plastic or ceramic grip for all adjustment.
3-1-1 AM adjustment
1. Set the function switch to the TUNER position.
2. Set the BAND switch to the AM position.
3. Connect the test loop antenna across the output of the signal generator.
4. Connect the oscilloscope to the PHONES JACK terminal.
5. Connect the digital multimeter to R430/R453 on TUNER PCB.
6. Set the signal generator as listed in the alignment chart.
3-1-2 FM adjustment
1. Set the function switch to the TUNER position.
2. Set the BAND switch to the FM position.
3. Connect the signal generator output through a 75 ohm dummy antenna to "ANT" on MAIN PCB.
4. Connect the oscilloscope to the PHONES JACK terminal.
5. Connect the digital multimeter to R450/C404 on TUNER PCB.
6. Set the signal generator as listed in the alignment chart.

5
SL-D910
3-2-1. RADIO ALIGNMENT
ITEM
SG SETTING TUNER
SETTING ADJUSTMENTS
MEASURING
POINTS.
RESULT
Audio Modulation Frequency Output
1.VOLTAGE
adjustment
1620KHz L402 AM OSC coil VT 8.8-9.2V
522KHz Check
2.IFT
adjustment 1KHz 30% 450KHz 76dBuV 603KHz L401 AM IFT coil Maximun output
level
3.ANT Coil
adjustment 1KHz 30% 603KHz 76dBuV 603KHz L405 AM ANT coil Maximun output
level
4.TC401
adjustment 1KHz 30% 1404KHz 76dBuV 1404KHz TC401 Repeat step 3 and 4
Maximun output
level
AC
v
o
l
t
m
ete
r
A
M Signal generator
AM LOOP
Antenna
60CM
AM Di
g
ital multimeter
VT voltage
SL-D910
PHONES
R453
R430
1K Ω
1K Ω

6
SL-D910
3-2-2. FM TUNER
ITEM
SG SETTING TUNER
SETTING ADJUSTMENTS
MEASURING
POINTS.
RESULT
Audio Modulation Frequency Output
1.VOLTAGE
108MHz Check VT 7 +/-0.5V
87.5MHz Check
2.ANT Coil 1KHz 22.5kHz 90.1MHz 76dBuV 90.1MHz Check Maximun output
level
3.adjustment 1KHz 22.5kHz 106.1MHz 76dBuV 106.1MHz Check Maximun output
level
Di
g
ital multimeter
S1
75 ohm
FM Signal generator
A
C voltmeter
FM SL-D910
PHONES
C404
R450 VT voltage
1K Ω
1K Ω

7
SL-D910
4 EXPLODED VIEWS AND PARTS LIST
EXPLODE VIEW-1

8
SL-D910
REF.NO TEAC PARTS NO. PARTS NO. DESCRIPTION REMARKS
1-1 024-43010033-R SCREW 3×10MM PWA BLACK HD
1-2 061-0LT10800-R SPEAKER 2" 8 OHM 15~20W
1-3 035-SD900082-R R/L SPEAKER EVA WASHER
1-4 021-23014033-R SCREW 3×14MM BT BLACK HD
1-5 010-SD900300-R LEFT SPEAKER COVER
1-6 010-SD900400-R RIGHT SPEAKER COVER
1-7 099-39SLD902-R ABSORB COTTON C (SIZE:80×100×T20MM)
1-8 035-SLD90052-R EVA SHEET(D)
1-9 035-SLD90072-R EVA SHEET(F)
1-10 010-SD900000-R SPEAKER BOX
1-11 011-SD900200-R HEAT SINK BKT
1-12 021-13008032-R SCREW
3×8MM PT ZMC HD
1-13 100-D9101030-R CD PCB ASS'Y
1-14 022-23008033-R SCREW
3×8MM BM BLACK HD
1-15 018-SLD90000-R POWER IC HEAT SINK
1-16 024-23010032-R SCREW
3×10MM BA ZMC HD
1-17 015-SD900100-R ADIABATIC SHEET
1-18 021-13010032-R SCREW
3×10MM PT ZMC HD
1-19 024-23008032-R SCREW
3×8MM BA ZMC HD
1-20 100-D9101010-R MAIN PCB ASS'Y
1-21 021-13006032-R SCREW
3×6MM PT ZMC HD
1-22 100-D9101040-R TUNER PCB ASS'Y
1-23 099-39SLD901-R ABSORB COTTON A (SIZE:120×135×T20MM)
1-24 021-44010032-R SCREW
4×10MM PWT ZMC HD
1-25 061-0LT10801-R SPEAKER 3" 8 OHM 15~20W
1-26 035-SLD90002-R WOOFER SPEAKER EVA WASHER
1-27 035-SLD90022-R EVA SHEET(A)
1-28 011-SD900401-R TRANSFORMER BKT.
1-29 021-44018032-R SCREW
4×18MM PWT ZMC HD
1-30 084-SD900100-R TRANSFORMER "VDE"230V/50HZ
084-SD900200-R TRANSFORMER "UL"120V/60HZ
084-SD900300-R TRANSFORMER "PES"110V/60HZ
1-31 100-90MU1070-R HEAD PHONE JACK PCB ASS'Y
1-32 087-00000001-R AC CORD "VDE" L=2000MM BLACK
087-18000009-R AC CORD "EK/KTL"
087-00000004-R AC CORD "BSI" L=2000MM BLACK
087-00000003-R AC CORD "PSE" L=2000MM BLACK
087-00000030-R AC CORD "VDE" L=2000MM BLACK "CCC"MARK
087-00000017-R AC CORD "UL" L=2000MM BLACK
1-33 010-SD900600-R CORD STOP
1-34 021-44012032-R SCREW
4×12MM PWT ZMC HD
1-35 004-SD900700-R BASS KNOB
1-36 100-90MU1050-R BBS VR PCB ASS'Y
1-37 001-910R0200-R BOTTOM PANEL(RED)
001-910W0200-R BOTTOM PANEL(WHITE)
001-910B0200-R BOTTOM PANEL(BLACK)
001-910S0200-R BOTTOM PANEL(SILVER)
001-910M0200-R BOTTOM PANEL(MOSS GREEN)
001-910N0200-R BOTTOM PANEL(NAVY BLUE)
1-38 037-SD900000-R RUBBER FOOT
1-39 044-SlD90040-R SPEAKER PAPER TUBE(BOTTOM)
1-40 031-D9100210-R MEMORY BATTERY SPRING(-VE)
1-41 099-47KL300i-R CR2032 DC:3V
1-42 031-D9100110-R MEMORY BATTERY SPRING(+VE)
1-43 010-910R0200-R MEMORY BATTERY COVER (RED)
010-910W0200-R MEMORY BATTERY COVER (WHITE)
010-910B0200-R MEMORY BATTERY COVER (BLACK)
010-910S0200-R MEMORY BATTERY COVER (SILVER)
010-910M0200-R MEMORY BATTERY COVER (MOSS GREEN)
010-910N0200-R MEMORY BATTERY COVER (NAVY BLUE)
1-44 025-000R1001-R SPECIAL SCREW
3×10MM NI HD
EXPLODED VIEW-1 PARTS LIST

9
SL-D910
EXPLODE VIEW-2

10
SL-D910
REF.NO TEAC PARTS NO. PARTS NO. DESCRIPTION REMARKS
2-1 006-90MU0005-R CD DOOR (RED)
006-90MU0004-R CD DOOR (WHITE)
006-90MU0002-R CD DOOR (SILVER)
006-90MU0003-R CD DOOR (BLACK)
006-90MU0000-R CD DOOR (MOSS GREEN)
006-90MU0001-R CD DOOR (NAVY BLUE)
2-2 052-SLD90000-R CD MIGNET
2-3 010-SD900500-R CD CLAMPER
2-4 051-SLD90005-R CD CLAMPER HIMERON(A)
2-5 021-42005032-R SCREW
2×5MM PWT ZMC HD
2-6 006-SD900100-R CD DOOR COVER (RED)
006-90MU0102-R CD DOOR COVER (WHITE)
006-SD900103-R CD DOOR COVER (BLACK)
006-D90S0100-R CD DOOR COVER (SILVER)
006-90MU0100-R CD DOOR COVER (MOSS GREEN)
006-90MU0101-R CD DOOR COVER (NAVY BLUE)
2-7 010-SD901100-R CD DOOR CATCH (RED)
010-90MU1102-R CD DOOR CATCH (WHITE)
010-SD901103-R CD DOOR CATCH (BLACK)
010-D90S0100-R CD DOOR CATCH (SILVER)
010-90MU1100-R CD DOOR CATCH (MOSS GREEN)
010-90MU1101-R CD DOOR CATCH (NAVY BLUE)
2-8 031-SD900010-R CD DOOR SPRING
2-9 037-SD900300-R CD SPRING RUBBER PAD
2-10 024-93008031-R SCREW
3×l0MM CA NI HD
024-93010033-R SCREW
3×l0MM CA BLACK HD
2-11 010-SD901200-R CD DOOR LOCK FIQ61BA-ZO-J046-00000
2-12 021-13006032-R SCREW
3×6MM PT ZMC HD
2-13 100-90MU1080-R SNOOZE PCB ASS'Y
2-14 035-SLD90102-R CD TRAY EVA:15×4×T9.5MM
2-15 002-SD900000-R CD BASE
2-16 008-OGP18000-R GEAR DUMPER ASS'Y
2-17 021-43008053-R SCREW
3×8 MM PWB BLK HD
2-18 100-90MU1060-R CD SWITCH PCB ASS'Y
2-19 009-00800001-R CD PICK UP COVER
2-20 039-A2000132-R CD PICK UP MECHA(CMS-B35VG6U)
039-SD901210-R CD PICK UP MECHA(KSM-213CDM)
2-21 037-0LT10l00-R CD RUBBER CUSHION BLACK
2-22 037-0LT10200-R CD RUBBER CUSHION PINK
2-23 021-43010032-R SCREW
3×l0MM PWT ZMC HD
EXPLODED VIEW-2 PARTS LIST