Technika LCD19ID-107 User manual

19 LCD TV
LCD19ID-107/207
LCD19ID-107/207
TECHNIKA
19 LCD TV
For Assistance Please Call Our Tesco Electrical
Helpline On 0845 456 6767

Contents
1 Safety and warnings.......................................................................2-5
2 Introduction.................................................................................6-7
3 Installation...................................................................................8-13
4 Remote controler.........................................................................14-16
5 Operation...................................................................................17-19
7 Trouble Shooting.............................................................................25
6 DVB MENU................................................................................20- 24
-1-

IMPORTANT SAFETY INSTRUCTIONS
-2-
1.Read these safety instructions.
2.Keep these safety instructions.
3.Heed all warnings.
4.Follow all safety instructions.
5.Do not use this apparatus near water.
6.Clean only with a dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturers
instructions.
8.Do not install near any heat sources such as radiators,,stoves, or other apparatus
(including
9.Protect the power cord from being walked on or pinched particularly at power outlets,
and the point where they exit from the apparatus.
10.Only use attachments/accessories specified by the manufacturer.
11.Unplug this apparatus during lightning storms or when unused for long periods of time.
12.Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into apparatus, the apparatus has been
exposed to rain or moisture , does not operate n
13.Apparatus must not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, should
amplifiers)that produce heat.
ormally, or has been dropped.
be placed on the apparatus.
IMPORTANT SAFETY INSTRUCTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
CAUTION
The symbol indicates that dangerous voltage
constituting a risk of electric shock is present within
this unit.
The symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING:
-3-
IMPORTANT SAFETY INSTRUCTION

-4-
WARNINGS AND CAUTIONS
Warning
High voltages are used in the operation of this television
receiver.
Do not remove the cabinet back from your set Refer
servicing to qualified service personnel.
Warning
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Warning
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Caution
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Caution
Do not power supply cord under the television
receiver.
trap

-5-
WARNINGS AND CAUTIONS
Caution
Never stand on, lean on, or suddenly push the television or its
stand. You should pay special attention to children. Serious
injury may result if it should fall.
Caution
Do not place your television on an unstable cart, stand, shelf or
table.
Serious injury to an individual , and damage to the television,
may result if it should fall.
Caution
When the television receiver is not used for an extended
period of time, it is advisable to disconnect the AC power cord
from the AC outlet.
Avoid exposing the television receiver to direct sunlight and
other sources of heat. Do not stand the television receiver
directly on other product which give off heat. e.g. video
cassette players and audio amplifiers. Do not place naked
flame sources, such as lighted candles on the television.
Caution
If the television is to be built into a compartment or similar
enclosed, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and can
also be dangerous.
Caution
Dim:515*320mm(

INTRODUCTION
-6-
Thank you very much for purchasing this TV. To enjoy from the very beginning, read
this manual carefully and keep it handy for easy reference.
INSTALLATION
CAUTION
Locate the TV in the room where light does not strike the screen .
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and
indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or
premature component failure.
This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC
supply or any other power supply.
Do not cover the ventilation openings when using theTV.
directly
Never tamper with any components inside the TV, or any other adjustment controls not
mentioned in this manual. All LCD-TVs are high voltage instruments. When you clean
up dust or water drops on the LCD PANEL or CABINET, the power cord should be
pulled out from the receptacle, then wipe the TV with a dry soft cloth. During thunder
and lighting, unplug the power cord and antenna cord to prevent damage to your TV.
All repairs to this TV should only be performed by the TV service personnel.

-7-
INTRODUCTION
Main features
Used as a Television display terminal or PC display
High luminance,wide viewing angle
Can store 180 TV programs
Translucent OSD
Auto-search
Full function Remote Control
850:1
6
2x1.5V AAA Battery
DVB-T DVB-T

AC Power Cord.........................1
Infrared Remote Controller...... 1
User s Manual ........................ 1
INSTALLATION
Accessories
Front panel
-8-
1
ENTER
2 3
4 5 6
7 8 9 0
+
CH
_
+
_
VOL
POWER MUTE
SWAP
RECALL
TVMENU INPUT
DVBMENU SOUND EXIT
PIC
SLEEP ASPECT
TEXTDISPLAYSOURCE
INFO FAV EPG
REVEAL HOLD LIST INDEX
SUBPAGE SIZE AUDIO SUBTITLE
ON: OFF:
1
1: STANDBY BUTTON: Turn ON/OFF the TV set.
2: Remote control sensor.
3: Indicator LED: GREEN POWER ON.
RED STAND BY.
4: Key board(see next page).
5: AC power switch.
3
2
4
5
30 30
Battery(AAA)............................2

SOURCE
MENU
CH+
CH-
VOL+
VOL-
1 SOURCE
Display the input source menu.
CH+ or CH- to select items in MENU.
2 MENU
3 CH+/CH-
4 VOL+/VOL-
5USB
To display TV MENU.
In TV mode press CH+ or CH- to change the channel up and down.
In DTV mode,it can not change the channel.
In AV,S-VIDEO,YPbPr and SCART mode,it can switch to TV directly.
In MENU,press
Press CH+ or CH- to return the previous mode under Standby status.
Adjust sound level.
In MENU,adjust the item that you selected.
All the terminals are(from left to right):
AC POWER SOCKET,VGA ,PC AUDIO,AV,S-VIDEO,YPbPr,SCART,ANTENNA
Note: AV,S-VIDEO and YPbPr share one audio channel.
INSTALLATION
-9-
KEYBOARD
REAR PANEL CONNECTIONS
SCART
ANTENNA
AV
S-VIDEO
L
R
AUDIO
INPUT YPbPr
INPUT
Y
Pb
Pr
AUDIO
VGA INPUT
VGA INPUT
100-240V~ 50/60Hz
AC-INPUT
SCART
ANTENNA
AV
S-VIDEO
L
R
AUDIO
INPUT YPbPr
INPUT
Y
Pb
Pr
AUDIO
VGA INPUT
VGA INPUT
100-240V~ 50/60Hz
AC-INPUT
USB
USB
USB

ANTENNA
INSTALLATION
-10-
Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.
DVB-T antenna

SCART
ANTENNA
AV
S-VIDEO
L
R
AUDIO
INPUT YPbPr
INPUT
Y
Pb
Pr
AUDIO
VGAINPUT
VGAINPUT
100-240V~ 50/60Hz
AC-INPUT
SCART
ANTENNA
AV
S-VIDEO
L
R
AUDIO
INPUT YPbPr
INPUT
Y
Pb
Pr
AUDIO
VGAINPUT
VGAINPUT
100-240V~ 50/60Hz
AC-INPUT
STEPS:
PC
8
INSTALLATION
-11-
Be sure both the TV and computer are Power off.
1.Connect VGA and audio cable
2.Connect power cord
3.Power on the TV, switch input to PC mode
4.Power on the PC
This sequence is very important.

PRESET MODE(recommended resolution is 1440*900@60Hz)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
720*400
640*480
640*480
640*480
800*600
800*600
800*600
800*600
1024*768
1024*768
1024*768
1280*1024
1280*1024
1440*900
1440*900
70
60
72
75
56
60
75
72
60
70
75
60
75
59.88
74.98
31.47
31.47
37.86
37.50
35.156
37.88
46.88
48.08
48.36
56.48
60.02
63.98
80.00
55.93
70.63
RESOLUTION V.Freq.(Hz) H.Freq.(KHz)
INSTALLATION
PC
-12-

AV EQUIPMENT
To audio
outputswith
terminal
VIDEO EQUIPMENT
VIDEO EQUIPMENT with YPbPr
To audio outputs
with S-video
terminal
VIDEO EQUIPMENT
To S-VIDEO
output
Yellow (video)
White(audio L)
Red(audio R or Pr)
Y
W
R
Y W R
R
W
Y
W R
W R
output
To video
GBR
GBR
INSTALLATION
This TV provides one group of AV ,one S-Video,one group (YPbPr) and one SCART socket for
convenient connection to VCR,DVD or other video equipment. Please refer to the owner s
manual of the equipment to be connected as well.
You can use the input terminals on rear of the TV as follows.
’
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder,
video game or stereo system, etc.....
YPbPr can support these video fomats:480i,576i,480p,576p,720p,1080i.
*Please keep AC cord unplugged when connecting TV system.
-13-
Blue(Pb)
Green(Y)
B
G
SCART
SCART
ANTENNA
AV
S-VIDEO
L
R
AUDIO
INPUT YPbPr
INPUT
Y
Pb
Pr
AUDIO
VGA INPUT
VGA INPUT
100-240V~ 50/60Hz
AC-INPUT
SCART
ANTENNA
AV
S-VIDEO
L
R
AUDIO
INPUT YPbPr
INPUT
Y
Pb
Pr
AUDIO
VGA INPUT
VGA INPUT
100-240V~ 50/60Hz
AC-INPUT

Remark:
BATTERY INSTALLATION
Insert Batteries Into the Remote Control
1. Remove the battery cover.
2. Insert the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the
polarity marks Inside the unit.
3. Mount the battery cover.
Replace with new batteries when the TV set begins to show the following symptoms:
Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control
Unit.
1) Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if the remote control is not to be used for a
long time.
-14-

-15-
REMOTE CONTROLLER
REMOTE CONTROLLER
1
ENTER
2 3
4 5 6
7 8 9 0
+
CH
_
+
_
VOL
POWER MUTE
NICAM
RECALL
TV MENU SOURCE
DVB MENU SOUND EXIT
PIC
SLEEP ASPECT
TEXTDISPLAYAUTO
INFO FAV EPG
REVEAL HOLD LIST INDEX
SUBPAGE SIZE AUDIO SUBTITLE
25
26
8
2
3
4
5
7
12
14
15
20
18
16
13
1
17
6
1:POWER:To set the TV to standby or on.
2:NUMBER KEY:
3:TV MENU:To display TV menu.
4: CURSOR:To move within the menu.
5: DVB MENU:To display DVB menu.
6: VOL+/- :To adjust sound level.
7: PIC:To switch picture mode.
8: SLEEP:S
9: AUTO:
10:INFO:
11:FAV:
12:TELETEXT KEYS(see next page )
13:MUTE:To disable or enable the sound.
14: NICAM:
15: RECALL: To access the previously viewed
programme.
16: SOURCE:Select EXT sources.
17: ENTER:Confirms selection.
18: EXIT:
19: SOUND:To switch sound mode.
20: CH+/CH-:To access the next or previous
Programmes.
21: ASPECT: To change picture aspect.
22:DISPALY:
23: TEXT:To enter or exit TELETEXT.
24: EPG:
25:SUBTITLE:
26:AUDIO:
For direct access to
programmes. For a 2 (3) digit programme
number,The second (third) digit must be
entered before the dash disappears. The
number, the name (and the sound mode, in
analogue mode) are displayed . For a few
Seconds.
et time to turn off the TV.
Used to display information about the
channel being viewed or further information
about the program when in small EPG
screen.
Used to access your favourite channels.
Used to return to the previous screen
or menu.
Used to display information about the
program being viewed and what's on next.
Used to switch between different
subtitles that are broadcasted.
Used to set the sound output, the
Available
settings are STEREO, LEFT, RIGHT, MONO.
Auto adjust in PC mode.
To swich nicam mode.only be
available In tv program with nicam Mode.
Displays/removes the programme
Information.
9
19
21
23
24
22
10
11

E
TEXT
Selecting a pag e
Direct access
to the items
INDEX
SUB PAGE
HOLD
REVEAL
Press : You will obtain :
SIZE
LIST
REMOTE CONTROLLER
TELETEXT
-16-
This is used to call or exit teletext mode.The summary appears
with a list of items that can be accessed. Each item has a
corresponding 3 digit page number.If the channel selected
does not broadcast teletext, the indication 100 will be
displayed and the screen will remain blank (in this case, exit
teletext and select another channel).
Enter the number of the page required using the 0 to 9
up/down. Example: page 120, enter 120. The number is
displayed top left, the counter turns and then the page is
displayed. Repeat this operation to view another page. If the
counter continues to search, this means that the page is not
transmitted. Select another number.
Coloured buttons are as are displayed at the bottom of the
screen.The 4 coloured keys on the remote control are used to
access the items corresponding to the coloured buttons at the
bottom of the screen. The coloured areas flash when the item
or the page is not yet available.
This returns to the contents page (usually page 100).
Certain pages contain sub-pages which are automatically
displayed successively.This key is used to stop or resumesub-
page acquisition.The indication appears top left.
To freeze the page.
To display or hide the concealed information (games solutions).
This allows you to display the top or bottom part of the page and
then return to normal size.
The user can set four favourite pages to be directly linked to
the four colour keys. While the list mode is activated, it is not
possible to use TOP or BOTTOM navigation with the colour
keys. The favourite page numbers are stored and restored
to/from non volatile memory for each channel by the system
software.

1. PICTURE MENU
The first item of the MENU is picture menu.
You can adjust picture here,such as contrast,brightness,etc.
Press to move,press to adjust.
Note:
1.HUE only available when receiving an NTSC signal.
2. Four picture modes: BRIGHT, SOFT, STANDARD and USER.
3. Three colour temperatures: NORMAL,WARM,COOL.
PICTURE
CONTRAST 50
BRIGHTNESS 50
HUE 50
SATURATION 50
SHARPNESS 50
COLOR TEMP.
PICTURE MODE
PICTURE MODE
NORMAL
USER
ADJUST SELECT EXIT
2.SOUND MENU
The second item of the MENU is SOUND MENU.
You can adjust the sound here.
Press to move,press to adjust.
SOUND
BASS 50
TREBLE 50
BALANCE 50
SOUND MODE
SOUND MODE USER
ADJUST SELECT EXIT
Note:
1.There are 5 sound modes: USER, MUSIC, SPEECH, MOVIE and STANDARD.
OPERATION
-17-
OPERATION-ANALOG TV
NICAM FM-MONO
AVL OFF

3.CHANNEL MENU
The third item of the MENU is channel menu(only in TV mode).
You can complete channel search and setting here.
1.COLOUR SYS:AUTO,PAL,SECAM. AUTO is recommended.
2.SOUND SYS:DK,BG,I.
You should set this system according to the local TV broadcast before AUTO SCAN.
If the setting is wrong, the sound and colour maybe abnormal.
3.SKIP
To skip the current channel yes or no.
4. AUTO SCAN
Search all the channels automatically.
5. MANUAL
Search the channels manually.
6. FINE
Fine tuning the channel.
CHANNEL
CHANNEL 3
COLOR.SYS
SOUND.SYS
SKIP
AUTO SCAN
AUTO SCAN
MANUAL
FINE
AUTO
D/K
OFF
168.20M Hz168.20M Hz
168.20M Hz168.20M Hz
ADJUST SELECT EXIT
4.FUNCTION MENU
The fourth item of the MENU is the function menu.
You can adjust settings below.
RESET: Reset all the settings to default value.
BLUE SCREEN: Switch on/off blue screen when no signal.
AUTO: Auto adjust in PC mode only.
BACK LIGHT: Adjust BACK LIGHT in PC mode only.
FUNCTION
RESET
BLUE SCREEN
BLUE SCREEN
TXT LANGUAGE
AUTO
BACKLIGHT
ON
WEST
100
ADJUST SELECT EXIT
OPERATION
-18-
OPERATION-ANALOG TV

5.OSD MENU
The fifth item of the MENU is OSD menu.
You can adjust OSD here.
There are 1 OSD languages: ENGLISH.
OSD
LANGUAGE
H-POSITION
V-POSITION
DUR ATION
HAL FTONE
50
50
50
50
ENGLISH
ADJUST SELECT EXIT
OPERATION
-19-
OPERATION-ANALOGUE TV