Technika 42-2030 User manual

OPERATING INSTRUCTIONS
For assistance, please call our Tesco Electrical Helpline on 0845 4566767
42-2030
The FREEVIEW service is subject to coverage. An aerial upgrade
may be required. The FREEVIEW, FREEVIEW+, FREEVIEW HD
and FREEVIEW+ HD words and logos are trade marks of DTV
Services LTD. © DTV Services Ltd 2010.
Channels subject to change. The channel logos are trademarks
and copyright of their respective owners.
CHECK YOUR HD COVERAGE
online at freeview.co.uk or text
your postcode followed by your
house number or name to 80560
(e.g. NW9 6NY 1) Costs no more
than a normal text.
*4HD not in Wales. Clirlun, S4C’s High Definition Channel,
in Wales only.
Colour Television with Remote Control
〰彔䕃䡎䥋䄠䍏噅删⡙䕎䤠䱏䝏⥟弱〰㘸㔳㝟㔰ㄶ㜱㘵
ㄷ⁈慺楲慮′〱〠健狾敭扥‱ㄺ㔴㨱

50167165
〰彔䕃䡎䥋䄠䍏噅删⡙䕎䤠䱏䝏⥟弱〰㘸㔳㝟㔰ㄶ㜱㘵
ㄷ⁈慺楲慮′〱〠健狾敭扥‱ㄺ㔴㨱

English - 1 -


)UHHYLHZ+'FRYHUDJHUROORXW
7KHIROORZLQJPDSVJLYHDQLQGLFDWLRQRIWKHLQFUHDVLQJSHUFHQWDJHRI8.KRXVHKROGV
DEOHWRDFFHVV)UHHYLHZ+'DVWKHWUDQVPLVVLRQQHWZRUNXSJUDGHSURJUHVVHVWR

-XO\RI8.KRXVHKROGV


(QGRIRI8.KRXVHKROGV

&URZQFRS\ULJKWDQG
GDWDEDVHULJKW$OOULJKWV
UHVHUYHG2UGQDQFH6XUYH\
/LFHQFHQXPEHU
&URZQFRS\ULJKWDQG
GDWDEDVHULJKW$OOULJKWV
UHVHUYHG2UGQDQFH6XUYH\
/LFHQFHQXPEHU
Please note that the maps are
only indicative of the areas
in which Freeview HD will be
available as the transmission
network upgrade progresses.
Fordetailedcoverageinformation
associated with specific dates,
the postcode checker database
should be used.
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 1A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 1 17.06.2010 13:09:5717.06.2010 13:09:57

English - 2 -


(QGRIRI8.KRXVHKROGV


(QGRI'62LQRI8.KRXVHKROGV

&URZQFRS\ULJKWDQG
GDWDEDVHULJKW$OOULJKWV
UHVHUYHG2UGQDQFH6XUYH\
/LFHQFHQXPEHU
&URZQFRS\ULJKWDQG
GDWDEDVHULJKW$OOULJKWV
UHVHUYHG2UGQDQFH6XUYH\
/LFHQFHQXPEHU
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 2A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 2 17.06.2010 13:09:5917.06.2010 13:09:59

English - 3 -
Contents
Features ................................................................. 4
Introduction............................................................. 4
Package Contents.................................................. 4
Preparation............................................................. 5
Safety Precautions ................................................. 5
Power Source..................................................... 5
Power Cord......................................................... 5
Moisture and Water ............................................ 5
Cleaning.............................................................. 5
Heat and Flames ................................................ 5
Lightning............................................................. 5
Replacement Parts............................................. 5
Servicing............................................................. 5
Waste Disposal................................................... 5
Information for Users in European Union
Countries ............................................................ 6
Disconnecting the Device...................................6
Headphone Volume............................................ 6
Installation........................................................... 6
LCD Screen........................................................ 6
Warning .............................................................. 6
Inserting Batteries in the Remote Control............... 7
Switching the TV On/Off.........................................7
To Switch the TV On........................................... 7
To Switch the TV Off........................................... 7
Environmental Information ..................................... 7
Overview of the Remote Control ............................8
LCD TV and Operating Buttons.............................. 9
Viewing the Connections- Back Connectors ..........9
Viewing the Connections - Side Connectors.........11
Power Connection.................................................11
Aerial Connection..................................................11
Using USB Input................................................... 12
USB Memory Connection.................................12
Connecting the LCD TV to a PC........................... 12
Connecting to a DVD Player................................. 13
Using Side AV Connectors ...................................13
Connecting Other Equipment via Scart................13
Input Selection...................................................... 14
Basic Operations.................................................. 14
Operation with the Buttons of the TV................ 14
Operation with the Remote Control.................. 14
Initial Settings....................................................... 14
General Operation................................................ 15
Electronic Programme Guide (EPG).................15
Programme Options.......................................... 16
Analogue Teletext ............................................. 16
Widescreen....................................................... 16
IDTV Menu System ..............................................17
Channel List...................................................... 17
Navigating the Entire Channel List................... 17
Moving the channels in the channel list............17
Deleting the Channels in the Channel List .......17
Renaming channels.......................................... 17
Adding Locks to Channels................................17
Setting Favourites............................................. 18
Program Guide ................................................. 18
Common Interface........................................... 18
TV Setup........................................................... 18
Setup ................................................................ 19
Configuration .................................................... 19
Language Settings............................................ 20
Installation......................................................... 21
Analogue TV Menu System.................................. 22
Picture Menu..................................................... 22
Sound Menu ..................................................... 23
Feature Menu ................................................... 24
Install Menu ...................................................... 25
Source Menu .................................................... 26
Media Browser Menu............................................ 26
Playing .mp3 Files ............................................ 27
Playing .jpg Files...............................................27
PC Mode Menu System........................................ 27
PC Position Menu.............................................27
Displaying TV Information .................................... 28
Mute Function....................................................... 28
Picture Mode Selection......................................... 28
Freezing Picture ................................................... 28
Zoom Modes......................................................... 28
Auto .................................................................. 28
16:9................................................................... 28
4:3..................................................................... 28
Panoramic......................................................... 28
14:9................................................................... 28
Cinema ............................................................. 29
Subtitle.............................................................. 29
Zoom................................................................. 29
Teletext................................................................. 29
Tips....................................................................... 30
Screen Care...................................................... 30
Image Persistence............................................ 30
No Power.......................................................... 30
Poor Picture...................................................... 30
No Picture......................................................... 30
Sound ............................................................... 30
Remote Control................................................. 30
Input Sources.................................................... 30
Appendix A: PC Input Typical Display Modes....... 31
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types).............................................. 32
Appendix C: Supported File Formats for USB Mode33
Appendix D: Supported DVI Resolutions..............33
Specifications ....................................................... 34
Digital Reception (DVB-T)....................................34
Digital Reception (DVB-T2)..................................34
Important Instruction............................................. 35
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 3A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 3 17.06.2010 13:10:0017.06.2010 13:10:00

English - 4 -
Features
• Remote controlled colour LCD TV.
•Fully integrateddigitalTV (DVB-TDVB-T2- MPEG2
MPEG4).
• DTV input supports 1920x1080i
• HDMI connectors for digital video and audio. This
connectionis alsodesignedto accepthighdefinition
signals.
• USB input.
• 200 programmes from VHF, UHF(analogue).
• 1000 programmes for digital mode (IDTV).
• Integrated tuner DVB-T HD, MPEG 2 / MPEG 4
compatible.
• OSD menu system.
• Two scart sockets for external devices (such as
video, video games, audio set, etc.).
• Stereo sound system. (German+Nicam)
• Teletext, fastext, TOP text.
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
• Automatic sound mute when no transmission.
• NTSC playback.
• AVL (Automatic Volume Limiting).
•When novalid signalisdetected, after5 minutesthe
TV switches itself automatically to standby mode.
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP, Vista,
Windows 7.
• Audio line out.
• Game Mode
Introduction
Thank you for choosing this product.This manual will
guide youfor theproper operationofyour
TV. Before operating the TV, please read
this manual thoroughly.
Pleasedo keepthismanualin asafeplace
for future references.
Readthecorresponding instructionsofthis
handbook prior to the first usage of the
device, even when the usage of electronic devices is
familiarto you.Noticeespecially thechapter SAFETY
PRECAUTIONS. Carefully keep the handbook as
future reference. When selling the device or giving it
away, absolutely give these direction for use.
• This device is intended to receive and display TV
programs. The different connection options make
anadditional expansionofthe receptionand display
sources possible (receiver, DVD player, DVD
recorder,VCR, PCetc.).This deviceis onlysuitable
for the operation in dry interiors. This appliance is
intendedsolely forprivatedomesticuse andmaynot
beused forindustrialand commercialpurposes.We
exclude liability in principle, if the device is not used
as intended, or unauthorized modifications have
been made. To operate your LCD-TV in extreme
ambient conditions may cause the damage of the
device.
Package Contents
SCREEN
SCREEN
LANG
LANG
SUBTITLE
SUBTITLE
PIP
PIP
MENU
MENU
RETURN
RETURN
OK
OK
SOURCE
SOURCE
FAV
FAV
PRESETS
PRESETS
SLEEP
SLEEP
?
INFO
INFO
EPG
EPG
V+
V+
V-
V-
P-
P-
P+
P+
1234
6
5
9
7 8
0
Remote
Control
Batteries: 2 X AAA
Instruction Book
LCD TV
Note: You should check the accessories after purchasing.
Make sure that each accessory is included.
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 4A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 4 17.06.2010 13:10:0017.06.2010 13:10:00

English - 5 -
Preparation
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top
of the set.
Use this device in moderate climates.
10 cm
10 cm
10 cm
Safety Precautions
Please read the following recommended
safety precautions carefully for your
safety.
Power Source
The TV set should be operated only from a 220-240
VAC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
Power Cord
Do not place the set, a piece of furniture, etc. on the
powercord (mainslead) or pinchthe cord.Handlethe
power cord by the plug. Do not unplug the appliance
by pulling from the power cord and never touch the
powercord withwethands asthis could causea short
circuitor electricshock.Never makeaknot inthecord
or tie it with other cords. The power cords should be
placed in such a way that they are not likely to be
stepped on.Adamaged power cord can cause fire or
give you an electric shock. When it is damaged and
needs to be replaced, it should be done by qualified
personnel.
Moisture and Water
Do not use this device in a humid and
damp place (avoid the bathroom, the
sink in the kitchen, and near the washing
machine). Do not expose this device to
rain or water, as this may be dangerous
anddo notplaceobjects filledwithliquids,
such as flower vases, on top. Avoid from
dripping or splashing.
Ifany solidobjector liquid fallsintothe cabinet,unplug
the TV and have it checked by qualified personnel
before operating it any further.
Cleaning
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid or
aerosol cleaners. Use soft and dry cloth.
Ventilation
Theslots andopenings ontheTV set areintended for
ventilationand toensurereliableoperation.To prevent
overheating, these openings must not be blocked or
covered in anyway.
Heat and Flames
Theset shouldnotbe placednearto open
flames and sources of intense heat such
asan electricheater. Ensurethatno open
flame sources, such as lighted candles,
are placed on top of the TV. Batteries
should not be exposed to excessive heat
such as sunshine, fire or the like.
Lightning
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Replacement Parts
Whenreplacement partsarerequired, makesure that
the service technician has used replacement parts,
which are specified by the manufacturer or have the
samespecifications astheoriginal one.Unauthorized
substitutions may result in fire, electrical shock or
other hazards.
Servicing
Please refer all servicing to qualified
personnel. Do not remove the cover
yourself as this may result in an electric
shock.
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable and
shouldprincipally berecycled.Packaging materials,
such as foil bag, must be kept away from children.
• Batteries, including those which are heavy metal-
free, should not be disposed of with household
waste. Please dispose of used battery in an
environment friendly manner. Find out about the
legal regulations which apply in your area. Don’t try
torecharge batteries.Danger ofexplosion.Replace
batteries only with the same or equivalent type.
• Cold cathode fluorescent lamp in LCD PANEL
contains a small amount of mercury; please follow
the local laws or regulations for disposal.
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 5A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 5 17.06.2010 13:10:0017.06.2010 13:10:00

English - 6 -
Information for Users in European
Union Countries
This symbol on the product or on its
packaging means that your electrical
and electronic device should be
disposed at the end of its service life
separatelyfrom yourhouseholdwastes.
There are separate collection systems
for recycling in EU.
For more information, please contact
thelocal authorityor thedealer whereyou purchased
the product.
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
Headphone Volume
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely
attachedto thewallin accordancewiththe installation
instructions when mounted to the wall (if the option
is available).
LCD Screen
TheLCD panelis avery hightechnologyproduct with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning
Do not leave your TV in standby or operating mode
when you leave your house.
•The Standby / On button doesn´t separate this
devicecompletely frommains. Moreoverthe device
consumes power in the standby operation. In order
to separate the device completely from mains, the
mains plug has to be pulled from the mains socket.
Because of that the device should be set up in a
way, that an unobstructed access to mains socket
is guaranteed, so that in case of emergency the
mains plug can be pulled immediately. To exclude
the danger of fire, the power cord should principally
beseparated fromthemains socketprior to alonger
period of non-usage, i.e. during vacations.
Electrical device not in the hands of children
Neverlet childrenuse electricaldeviceunsupervised.
Children can´t always recognize properly the
possible dangers. Batteries / accumulators can be
life threatening when swallowed. Store batteries
unreachable for small children. In case of swallowing
a battery medical aid has to be sought immediately.
Also keep the packaging foils away from children.
There is danger of suffocation.
LICENSE NOTICE
Manufactured under license from Dolby
Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 6A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 6 17.06.2010 13:10:0117.06.2010 13:10:01

English - 7 -
Inserting Batteries in the
Remote Control
• Remove the battery cover located on the back of
theremote controlby gentlypulling backwards from
the indicated part.
•InserttwoAAA/R3 orequivalenttypebatteriesinside.
Please ensure the correct polarity is observed.
+
+
--
Note: Remove the battery from remote control when it is not
to be used for a long period. Otherwise it can be damaged
due to any leakage of batteries.
Remote range is approximately 7m/23ft.
Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 220-240VAC 50 Hz.
Then the standby LED lights up.
• To switch on the TV from standby mode either:
• Press the “ ” button, P+ / P- or a numeric button
on the remote control.
• Press the -P/CH or P/CH+ button on the TV. The TV
will then switch on.
Note:IfyouswitchonyourTVviaPROGRAMMEUP/DOWN
buttonsontheremotecontrolor on theTVset, the programme
that you were watching last will be reselected.
By either method the TV will switch on.
To Switch the TV Off
•Press the“ ” buttonon theremote controlor press
the “ ” switch on the TV, so the TV will switch to
standby mode.
• To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search or Over Air Download is active.
Environmental Information
• This television is designed to consume less energy
to save environment.
You not only help to save the environment but also
you can save money by reducing electricity bills
thanks to the energy efficiency feauture of this TV.
To reduce energy consumption, you should take the
following steps:
• You can use Power Save Mode setting, located in
the Feature menu. If you set Power Save Mode
as On, the TV will switch to energy-saving mode
and luminance level of TV set will be decreased to
optimum level. Note that some picture settings will
be unavailable to be changed when the TV is in
Power Save Mode.
• When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will
also reduce energy consumption.
• Disconnect power when going away for longer
time.
• Note that annually, using the TV set in Power Save
Modehas morepowerefficiency thandisconnecting
the TV from the mains plug instead of keeping
stand-by mode. Therefore disconnect the TV from
the mains plug to save energy when you do not
use. However it is highly recommended to activate
Power Save Mode setting to reduce your annual
power consumption.
• Please helps us to save environment by following
these steps.
Repair Information
Please refer all servicing to qualified personnel. Only
qualifiedpersonnel must repairtheTV.Please contact
your local dealer, where you have purchased this TV
for further information.
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 7A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 7 17.06.2010 13:10:0117.06.2010 13:10:01

English - 8 -
Overview of the Remote Control
V
V
SCREEN
SCREEN
LANG
LANG
SUBTITLE
SUBTITLE
PIP
PIP
MENU
MENU
RETURN
RETURN
OK
OK
SOURCE
SOURCE FAV
PRESETS
PRESETS
SLEEP
SLEEP
?
INFO
INFO
EPG
EPG
V+
V+
V-
P-
P-
P+
P+
1234
6
5
9
7 8
0
V
8
9
10
11
15
28
29
12
13
14 16
17
27
26
25
20
23
22
21
19
18
1
2
3
4
5
6
7
24
30
Standby / On1. Mono/Stereo - Dual I-II2. Expand (in TXT mode)/ Image size3. Green / Picture Menu / Subtitle on-off (in DTV4. mode)
Red /Sound Menu5. Numeric buttons6. Teletext / Mix / PAT (in TXT mode)7. Cursor Left8. Menu9. AV / Source10. Favourite Mode Selection (in DTV mode)11. Volume Up12. Info / Reveal (in TXT mode)13. Mute14. Volume Down15. Programme Down / Page up (in DTV mode)16. Electronic programme guide (in DTV mode)17. Programme Up / Page down (in DTV mode)18. Sleep Timer19. Picture Mode Selecion20. Okay (Store) / Select / Channel list (in DTV21. mode)/ Hold (in TXT mode)
Cursor Down22. Exit (in DTV mode) / Return / Index page (in23. TXT mode)
Cursor Right / Subpage (in TXT mode)24. Cursor Up25. Previous programme26. Yellow / Feature Menu27. Blue / Install Menu28. No function29. Subtitle on-off (in DTV mode) / TXT subtitle30.
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 8A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 8 17.06.2010 13:10:0217.06.2010 13:10:02

English - 9 -
LCD TV and Operating Buttons
FRONT and REAR VIEW SIDE VIEW Control Buttons
Standby button1. TV/AV button2. Programme Up/Down3. buttons
Volume Up/Down buttons4.
Note: Press and
buttons at the same time to view
main menu.
Viewing the Connections- Back Connectors
12
LAN
EXT 2
EXT 1
1. Subwoofer Out is for connecting an external, active subwoofer to the set to give a much deeper bass
effect.
Use an appropriate RCA cable to connect the set to a subwoofer unit.
Audio Line Outs2. output audio signals to an external device such as an optional sound system.
To connect the external speakers to your TV, use AUDIO LINE OUTS of the TV with an audio cable.
3. EXT 2 inputs or outputs for external devices.
4. EXT 1 inputs or outputs for external devices.
Connect the SCART cable between EXT (SCART) sockets on TV and EXT (SCART) socket on your
external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the EXT (SCART) sockets, the TV will automatically switch
Standby LED
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 9A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 9 17.06.2010 13:10:0217.06.2010 13:10:02

English - 10 -
to AV mode. If both sockets are employed at the same time, EXT 1 will override EXT 2 unless manually
selected.
Note: You should connect the decoder to EXT-1, if you are planning to watch a scrambled channel.
The decoder might not function properly if you do not connect the decoder to the EXT 1 socket.
5. Component Video Inputs (YPbPr) are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”,
“Pb”, “Pr” correspond with your device’s connectors.
6. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects to the
TV via YPbPr.
Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of your PC to
enable PC audio.
Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device to
enable component audio.
7. S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to transfer audio signals to a device that has S/PDIF input.
8. RF
Input connects to an antenna or a cable system..
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the
device to the television with an appropriate antenna cable, as shown in the illustration in the following
pages.
Ethernet (LAN) Input is used for MHEG return channel (future service, currently under development by9. broadcaster).
PC Input10. is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
11. HDMI 2: HDMI Input
HDMI 1: HDMI Input12.
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD Television is capable of
displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. No sound
connection is needed for an HDMI to HDMI connection.
When you use the wall mount kit (optional) with the LCD TV, we would definitely recommend to plug all your
cables into the back of the LCD before mounting to the wall.
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 10A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 10 17.06.2010 13:10:0317.06.2010 13:10:03

English - 11 -
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. ACI card allows you to view all1. the channels that you subscribe to. For more information, see “Common
Interface” section.
Important Notice:2. Side USB Input 1 is for service use oniy. Note that this
USB connector does not have any other functions such as playing audio or
picture files.
Side USB input 2 is available in analogue TV mode. You can use Media3. Browser screen to browse a connected USB disk.
HDMI-34. : HDMI Input.
Headphone jack is used for connecting an external headphone to the system.5. Connect to the HEADPHONE jack to listen to the TV from headphones
(optional).
Video Input is used for connecting video signals of external devices. Connect6. the video cable between the VIDEO IN socket on the TV and the VIDEO OUT
jack on your device.
Audio Inputs are used for connecting audio signals of external devices.7. Connect the audio cable between the AUDIO INPUTS on the TV and the
AUDIO OUTPUT jacks on your device. Note: If you connect a device to the
TV via the VIDEO INPUT, you should also connect your device with an audio cable to the AUDIO
INPUTS of the TV to enable audio.
S-Video8. Input is used for connecting an S-VIDEO signal (e.g. from a camcorder or VCR). For using
S-VIDEO input; connect the video cable between the S-VIDEO input on the TV and the S-VIDEO
output on your device. Connect the audio cable between the AUDIO INPUTS (indicated with number 7
in the illustration) on the TV and the audio jacks on your device.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to theAERIAL INPUT socket located at the rear of the TV.
LAN
EXT 2
EXT 1
SERVICE
SERVICE
5Vdc-Max500mA 5Vdc-Max500mA
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 11A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 11 17.06.2010 13:10:0317.06.2010 13:10:03

English - 12 -
Using USB Input
•You can connect USB devices to your TV by using
the USB input of the TV. This feature allows you to
display/play JPG and MP3 files stored in a USB
stick.
• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
• You may back up your files before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any file damage or data loss.
• Do not pull out USB module while playing a file.
• The TV supports only FAT32 disk formatting. NTFS
format is not supported. If you connect a USB disk
with NTFS format, “usb is unformatted” osd will
be displayed.
CAUTION: Quickly plugging and unplugging
USB devices, is a very hazardous operation.
Especially, do not repeatedly quickly plug
and unplug the drive. This may cause
physical damage to the USB player and
especially the USB device itself.
SIDE VIEW USB MEMORY
USB Memory Connection
• Plug your USB device to the USB input of the TV.
• If the plugged USB disk is not recognised, please
reinsert the disk.
• It is recommended that you connect your USB
device directly to the Side USB input 2 of the TV.
Some compatibility problems may occur if you use
a separate cable connection.
Connecting the LCD TV to a PC
For displaying your computer’s screen image on
your LCD TV, you can connect your computer to the
TV set.
• Power off both computer and display before making
any connections.
• Use 15-pin D-sub display cable to connect a PC to
the LCD TV.
• When the connection is made, switch to PC source.
See “Input selection” section.
•Settheresolutionthatsuitsyourviewingrequirements.
Resolutioninformation canbefound intheappendix
parts.
LAN
EXT 2
EXT 1
PC audio cable
(not supplied)
to AUDIO INPUTS
on the TV
PC RGB cable
(not supplied)
to PC input
Audio
Inputs
PC Input
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 12A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 12 17.06.2010 13:10:0517.06.2010 13:10:05

English - 13 -
Connecting to a DVD Player
If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player’s instruction book for additional
information. Power off both the TV and the device
before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can
connectvia HDMI.When youconnectto DVDplayer
as illustrated below, switch to HDMI source. See,
“Input Selection” section.
• Most DVD players are connected through
COMPONENT SOCKETS. Use a component video
cableto connect videoinput.For enablingaudio, use
acomponent audiocableas illustratedbelow.When
the connection is made, switch to YPbPr source.
See, “Input selection” section.
• You may also connect through the EXT 1 or EXT 2.
Use a SCART cable as shown below.
Note: These three methods of connection perform the same
function but in different levels of quality. It is not necessary
to connect by all three methods.
HDMI
inputs
Scart sockets
Component
video
inputs
Component
audio
inputs
DVD Player
Using Side AV Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
•Forconnecting acamcorder,connect tothe S-VIDEO
or VIDEO IN socket and theAUDIO SOCKETS. Do
not connect the camcoder to S-VIDEO and VIDEO
IN socket at the same time since it can cause noise
in the picture. For selecting the related source, see
the section “Input selection” in the following parts.
•To listen tothe TVsound fromheadphones, connect
to the HEADPHONE jack of theTV.
Camcorder
Headphone
Connecting Other Equipment
via Scart
Most devices support EXT (SCART) connection. You
can connect a; DVD recorder, a VCR or a decoder
to your LCD TV by using the EXT (SCART) sockets.
Note that cables shown in the illustration are not
supplied.
Power off both theTV and the devices before making
any connections.
For more information, refer to your device’s own
instruction book.
Scart sockets
Decoder
DVD Recorder Video Recorder
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 13A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 13 17.06.2010 13:10:0617.06.2010 13:10:06

English - 14 -
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources.
• Press “SOURCE” button on your remote control for
directly changing sources.
or,
• Select “Source” option from the main menu
by using “ ” or “ ” button. Use then “ ” or
“”button tohighlight an inputand press“ ”button
to select.
Note: You can mark desired source options by pressing the
OK button.Therefore, when “SOURCE”button ispressed,
only the marked source options will be available (except for
the TV source).
Basic Operations
You can operate your TV using both the
remote control and onset buttons.
Operation with the Buttons of the TV
Volume Setting
•Press “ ”button todecrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
•Press“P/CH+”buttontoselectthenextprogrammeor
“P/CH -” button to select the previous programme.
Viewing Main Menu
•Press the“MENU” buttonto entermain menu.In the
mainmenu selectsub-menu using“P/CH -”or “P/CH
+”buttons andenterthe sub-menuusing“ ” or
“” buttons. To learn the usage of the menus,
refer to the menu system sections.
AV Mode
• Press the “TV/AV” button in the control panel on the
TV to switch between AV modes.
Operation with the Remote Control
• The remote control of yourTV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
• Functions of the menu system are described in the
following sections.
Volume Setting
•Press “V+” buttontoincrease thevolume. Press“V -”
buttonto decreasethe volume.Avolume levelscale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press “P -” button to select the previous
programme.
• Press “P +” button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to
select programmes between 0 and 9. The TV
will switch to the selected programme. To select
programmes between 10 - 1000 (for IDTV) or
10-199 (for analogue), press the numeric buttons
consecutively.Pressdirectlythe programmenumber
to reselect single digit programmes.
Initial Settings
When the TV is turned on for the first time, it is in the
digital mode. Because this is the first time the TV is
used,there areno channelsstoredin thememoryand
the following message appears on the screen.
• To select the “Yes” or “No” option, highlight the item
by using “ ” or “ ” buttons and press OK button.
The IDTV will automatically tune to the transmission
channels,searchingfordigitalterrestrialTVbroadcasts
and displaying the names of channels found. This
process will take a few minutes. To cancel searching,
you can press MENU button at any time during the
process. The following OSD will be displayed during
the automatic search:
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 14A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 14 17.06.2010 13:10:0717.06.2010 13:10:07

English - 15 -
After Automatic Search is completed, the following
message, asking for analogue channel search,
appears on the screen.
To search for analogue channels, select “Yes”. TV
switches to the analogue TV mode. A menu will be
displayed to search for analogue channels.
Set Language item by pressing “ ” or “ ” button.
Press“ ” or“ ”button tohighlight Country itemand
then use “ ” or “ ” to set. Press “ ” or “ ” button to
highlightTXT. Language. SetTXTLanguage byusing
“” or “ ” button. To cancel, press the BLUE button.
When finished, press OK or RED button to continue
and the following OSD will be displayed:
After automatic tuning is finalized, a programme list
will appear on the screen. In the programme list you
willsee the programmenumbersand namesassigned
to the programmes.
If you do not accept the locations and/or the names
ofthe programmes,you canchangethem inProgram
table. For details, see the section, “Program table”.
General Operation
Press the SOURCE button and select DTV from the
list. The TV then switches to digital TV mode.
Information Screen
• Whenever you change the channel using the P + or
P - button or numeric buttons, the TV displays the
broadcast picture along with an information banner
at the bottom of the screen. This will remain on the
screen for approximately a few seconds.
• The information banner can also be displayed by
pressingthe INFO buttonatany timewhilewatching
the TV. Pressing INFO button again removes the
banner.
When info banner is on screen, you can use Up or
Down cursor buttons to browse channels.
If the selected channel is locked, you must enter
the correct four digit key to view the channel. In this
case, a dialog box asking for the lock key will be
displayed:
Electronic Programme Guide (EPG)
Some, but not all, channels send information about
the current and next events. Please note that event
information is updated automatically. If there are no
event information data available for channels,EPG
will be displayed with blanks.
• Press EPG button to view the EPG menu.
• Press “ ” or “ ” buttons to navigate through
channels.
• Press “ ” or “ ” buttons to navigate through the
programme list.
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 15A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 15 17.06.2010 13:10:0817.06.2010 13:10:08

English - 16 -
RED button (Prev. Day): displays the programmes
of previous day.
GREEN button (Next day): displaysthe programmes
of the next day.
YELLOW button (Zoom): Expands programme
information.
BLUE button: displays filtering options.
INFO (Details): displays the programmes in detail.
OK (View): shows the highlighted channel / views
options.
Numeric buttons (Jump): go to preferred channel
directly via numeric buttons.
LANG: Scrolls page left.
SUBTITLE: Scrolls page right.
SWAP: Jumps to the current programme.
0 (SEARCH): activates “Guide Search” window
Press “0” button to view Guide Search menu. Using
this feature, you can search the programme guide
database in accordance with the genre selected or
with name match.
Programme Options
In EPG menu, press the OK button to enter the
“Programme Options” menu.
Using this option, you can switch to the selected
channel or exit.
Over Air Download
To ensure that your IDTV always has the most up-
to-date information, please ensure that, after use,
it is set to standby mode. At 3 A.M. each day, the
IDTV automatically searches for any updates which
may be broadcast and will download this to your
IDTV automatically. This operation will normally take
approximately 30 minutes.
Displaying Subtitles
With digital terrestrial broadcasting (DVB-T), some
programmes are broadcast with subtitles.
Note: You can enable subtitles by pressing the SUBTITLE
button.
Digital Teletext
• Press the TELETEXT ( ) button.
• The digital teletext information appears.
• Operate it with the coloured buttons, “ ” / “ ” / “ ”
or “ ”buttons and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
• When “Press “SELECT” button or similar message
appears on the screen, press the OK button.
• When the TELETEXT ( ) button is pressed, the
TV returns to television broadcasting.
• With digital terrestrial broadcasting (DVB-T), in
additionto digitalteletextbroadcasting togetherwith
the normal broadcasting, there are also channels
with just digital teletext broadcasting.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
• When you press the TELETEXT ( ) button again,
the digital teletext screen will be displayed.
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.
Widescreen
Depending on the type of the broadcast being
transmitted, programmes can be viewed in a number
of formats. Press the SCREEN button repeatedly to
change screen format.
WhenAuto is selected, the format being displayed is
determined by the picture being broadcast.
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 16A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 16 17.06.2010 13:10:0817.06.2010 13:10:08

English - 17 -
IDTV Menu System
• Press MENU button and DTV main menu will be
displayed.
Channel List
Using “ ” or “ ” buttons on the remote control in
main menu, make sure that the first item, Channel
List, is highlighted and press the OK buttonto display
the Channel List. Or you press the OK button during
watchingDVB-T broadcasting andget tothe Channel
List directly.
• Channel List is the place where the channels are
managed.
Navigating the Entire Channel List
• Press “ ” or “ ” keys for selecting the previous or
next channel.
• You can press or buttons to move page up or
page down.
• To watch a specific channel, highlight it using “ ”
or “ ” buttons and then press OK button, while the
“Select” item on Channel List menu is highlighted
via “ ” or “ ” buttons.
Moving the channels in the channel
list
• Press “ ” or “ ” buttons to select the channel that
will be moved.
• Press “ ” or “ ” buttons to select the ‘’Move’’ item
on Channel List menu and press OK to confirm.
Note:If you enter the same programme number of the
channelthat youwantto move, “....services will be replaced.
Do you want to continue?” OSD will be displayed. Press
OK to confirm or select “No” to cancel.
Deleting the Channels in the Channel
List
• Press “ ” or “ ” buttons to select the channel that
will be deleted.
• Press “ ” or “ ” buttons to select the “Delete’’item
on Channel List OSD.
Press “OK’ button to delete the highlighted channel
in the channel list. Then the message below appears
on the screen.
Note:You cantag/untag aselectedchannel byusingYELLOW
button. Use GREEN button to Tag/Untag all channels.
Renaming channels
To rename a specific channel, the channel must be
highlighted via pressing “ ” or “ ” buttons and then
highlight the “Edit Name” item by pressing “ ” or “
” buttons. Press “OK” button to activate rename
feature.
Nowpressing“ ” or“ ” buttonsmovestothe previous/
next character. Pressing “ ” or “ ” buttons toggles the
currentcharacter,i.e.,‘b’ characterbecomes ‘a’on and
‘c’on.Pressingthe numericbuttons‘0...9’ replaces the
highlighted character with the characters printed above
the key one by one as the button is pressed.
Press the MENU button to cancel the editing or OK
button to save the new name.
Adding Locks to Channels
Channel Locking provides a password-protected
access to channels selected by parents.
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 17A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 17 17.06.2010 13:10:0817.06.2010 13:10:08

English - 18 -
In order to lock a channel you should know the
Parental Lock password (default value is set to
0000 in the factory and can only be changed from the
Configuration menu).
By pressing “ ” or “ ” buttons, highlight the channel
tobe lockedandselect the“Lock” option by pressing
“” or “ ” buttons. Then press the OK button and a
password box is displayed:
Setting Favourites
Tosetafavouriteyoushouldhighlightthe“Favourites”
item at the bottom of the Channel List menu. Then
press OK button and Edit Favourite List menu
appears on the screen.
Note:You cantag/untag aselectedchannel byusingYELLOW
button. Use GREEN button to Tag/Untag all channels.
Adding a Channel to a Favourites List
By pressing “ ” or “ ” buttons, highlight the channel
that you want to add to the favourite list. By pressing
OK button, the highlighted channel is added to
FavouriteList. Ficonindicates thatachannel isadded
to Favourite List.
Removing a Channel from a Favourite List
•Highlightthechannelthatyou wanttoremovefrom the
favourite list and press OK button to remove.You can
press OK button again to re-adding a channel.
•To activateFavourites,go totheConfiguration menu
and select Favourite mode. Use “ ” or “ ” to set
Favourite mode as on. To cancel Favourites, set
Favourite Mode to Off.
Program Guide
This section is same with the instructions given in
the General Operations page. Please see Electronic
Programme Guide (EPG) section in the General
Operations part.
Common Interface
Press MENU button to display the main menu and
use the “ ” or “ ” buttons to highlight the “Common
Interface” line and press OK button.
It is required to subscribe to a pay channel company
to view the pay channels of the Digital Terrestrial
broadcasting.
Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the Television using
the following procedure.
• Switch off the TV and unplug from the mains.
• Insert the CAM, and then the viewing card to the
slot.
•The CAMshould becorrectly inserted,it isimpossible
toinsert fullyif reversed.The CAM ortheTVterminal
may be damaged if the CAM is forcefully inserted.
• Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
• Some CAMs may require the following set up.
Please set the CAM by entering the DIGITAL TV
menu, Common Interface then pressing OK button.
(CAM set up menu is not displayed when it is not
required.)
•To see the viewing contract information:
•EnterDIGITALTV;pressMENU button, then highlight
Common Interface and press OK button.
• When no module is inserted, “No Common
Interface module detected” message appears on
the screen.
• Refer to the module instruction manual for details
of the settings.
NOTE: Insert or remove the CI module only when the TV is
in STANDBY mode or SWITCHED OFF.
TV Setup
You can use this item to display the TV functions.
The digital TV Setup menu screen is accessed from
the main menu. Press the MENU button to display
the main menu and use or buttons to highlight “TV
Setup”. Press OK button to display TV Setup menu
screen.
You can find detailed information for all menu items
in “Analogue TV Menu System” section.
A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 18A01_MB38_[GB]_3902UK_IDTV-T2_GOLD7_42884W_10068537_50167165.indd 18 17.06.2010 13:10:0917.06.2010 13:10:09