TM
Product specifications and colors may vary.
IM-20700
Questions? Comments?
Visit our website at:
www.technosourceusa.com
GAME PLAY
©2005 Techno Source.
All Rights Reserved.
30 Canton Road, Kowloon, Hong Kong
MADE IN CHINA
OBJECT:
FILL IN THE GRID SO THAT EVERY ROW, EVERY COLUMN AND
EVERY 3 X 3 BOX CONTAINS THE NUMBERS 1 THROUGH 9.
1. To begin slide the switch from the OFF position and choose either
BEGINNER or ADVANCED mode.
2. Using the stylus, select Level 1, 2, 3 or 4 by touching the numbers 1, 2,
3or4on the bottom left side of the screen. 1 is easiest and 4 is the
most difficult.
3. Once the selection has been made a puzzle will appear on the screen.
The amount of fixed numbers appearing on the grid is determined by
the level selected. The higher the level the less fixed numbers appear.
4. Using the stylus fill in the grid by first touching the number at the bottom
of the screen to be selected and then touching the box within the grid to
place it. Please note that in the BEGINNER mode any number that has
been placed in an incorrect box will continue to flash to let you know that
it is in the wrong place.
5. To CLEAR an entry, touch the Cat the top of the screen and then touch
theboxonthegridtobecleared. Anewnumbercannowbeenteredin
that box using the same steps as above. You can also directly place a
new number in a filled box without clearing the previous number by
touching a new number and then touching the box.
6.
Once each of the numbers 1 through 9 has been placed correctly the number will disappear from
the bottom of the screen. If the numbers have all been placed correctly, a sound effect will
be heard. If no sound effect is heard then one or more numbers have been placed incorrectly.
7. The time clock in the top of the screen keeps track of the time it takes to complete the puzzle.
8.
Pause the game by touching the PAU SE icon located on the upper right of the screen. To
continue playing touch the PAU SE icon again. After 4 minutes of no play the game will turn off
automatically. Touch any icon on the screen to restart the game. Please note that when the game
resumes it will be in the PAU SE mode. Touch the PAU SE icon to continue playing.
9. The screen contrast can be adjusted by first touching the PAUSE icon at the top of the screen.
The numbers 1 through 9 will appear on the bottom of the screen. 1 is the lightest and 9 is the
darkest. Touch the number to set the desired contrast.
10.TurnthesoundonandoffbytouchingtheSOUND icon located on the upper right of the screen.
11.
At any time during the game the answer to the puzzle can be viewed for 5 seconds by touching ANS
located on the upper left of the screen. This can only be used 3 times during the course of a puzzle.
12. When a puzzle has been completed DONE will be displayed, then press any button and a new
puzzle will appear.
13. RESET the game by activating the pin hole RESET button located on the back of the product.
Stylus slot
1.
Please note that this game is based on puzzles which have only one solution.
Thus, there may be times toward the end of a puzzle where two different
options for placing numbers are technically acceptable, but only
one version is accepted as being correct by this handheld game.
No.20700
8+
CAUTION
• Adults should replace batteries.
• Not suitable for children under 3.
• May contain small parts.
• Do not dispose of batteries in fire; batteries may explode or leak.
• This product contains glass which may cause injury if broken.
CARING FOR YOUR DEVICE
• If the display becomes dim or malfunctions, replace the batteries.
• After replacing batteries, switch to BEG or ADV to ensure proper functioning.
(In most cases, game malfunctions are due to weak batteries.)
• In an environment with electrostatic discharge, the product may
malfunction and lose memory. In this case switch OFF and then turn to
BEG or ADV.
• If the product malfunction after switch to BEG or ADV, try to activate the pin hole
RESET button located on the back of the product to reset the game or simply
switch to OFF and back to BEG or ADV.
OPERATING INSTRUCTIONS
BATTERY INSTALLATION
• Unscrew the battery cover with a Phillips screwdriver.
• Insert 1 button cell battery (CR2032) with the positive (+)
and negative (-) ends facing in the proper direction as
indicated in the battery compartment. (see Fig. 1)
• Replace the cover.
SAFETY BATTERY USAGE
• Do not use rechargeable batteries in this product.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Do not dispose the batteries in fire, batteries may leak or explode.
• Batteries should be replaced by an adult.
• Please keep details for future reference.
Fig. 1
SCREEN
