TECHWOOD TFV-109 User manual


TRAVEL STEAM IRON
INSTRUCTION MANUAL
1

IMPORTANT SAFEGUARDS
❑Please read these instructions carefully before use.
❑Keep present instructions for future references.
❑Check that your mains voltage corresponds to that stated on
the appliance.
❑Only use the appliance for domestic purposes and
household or similar applications such as:
-staff kitchen areas, in shops, offices and other working
environments;
-by clients in hotels, motels and other residential type
environments;
- Environment type like :
• Farm Houses • Bed and Breakfast.
❑Only use the appliance in the way indicated in these
instructions.
❑Never use this unit near bathtub, shower, wash-hand basins
or other containers with water.
❑Never use this apparatus near water projections.
❑Never use this apparatus with the wet hands.
❑If, unfortunately the apparatus is wet, immediately withdraw
the cord of the socket-outlet.
❑Inform potential users of these instructions.
❑Never leave the appliance unsupervised when in use.
❑The appliance must be used only for its intended purpose. No
responsibility can be taken for any possible damage caused
by incorrect use or improper handling.
❑Children and persons with disabilities are not always aware of
the danger posed by the use of appliances.
❑This device can be used by children aged 8 years and older
and adults, with reduced physical, sensory or mental
capabilities or lack of experience and knowledge, if they have
been given supervision or instruction concerning use of the
2

appliance in a safe way and understand the hazards
involved.
❑Cleaning and maintenance must not be made by children
without supervision.
❑keep the iron and its cord out of reach of children less than 8
years of age when it is energized or cooling down.
❑This device is not a toy, do not leave small children or people
with disabilities to play with.
❑In order to ensure your children‘s safety, please keep all
packaging (plastic bags, boxes, polystyrene etc.) out of their
reach.
❑Caution ! Do not allow small children to play with the foil :
THERE IS A DANGER OF SUFFOCATION !
❑From time to time check the cord for damages. Never use the
appliance if cord or appliance shows any signs of damage.
❑Never immerse the appliance in water or any other liquid for
any reason whatsoever.
❑Never place it into the dishwasher.
❑Never use the appliance near hot surfaces.
❑If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly Competent
qualified person(*) in order to avoid a hazard.
❑Disconnect the power source cable before any operation of
cleaning of maintenance and accessories assembly.
❑The iron must not be left unattended while it is connected to
the supply mains.
❑The plug must be removed from the socket-outlet before the
water reservoir is filled with water.
❑The iron is not to be used if it has been dropped, if there are
visible signs of damage or if it is leaking.
❑The filling aperture must not be opened during use.
❑when placing the iron on its stand, ensure that the surface on
which the stand is placed is stable.
3

❑The iron must be used and rested on a flat and stable
surface.
❑When the iron is put back on its stand, make sure that the
surface that supports the iron-rest is stable.
❑Never use the appliance outside and always place it in a dry
environment.
❑Never use accessories, which are not recommended by the
producer. They could constitute a danger to the user and risk
to damage the appliance.
❑Never use any other connector than the one provided.
❑Never move the appliance by pulling the cord. Make sure the
cord cannot get caught in any way.
❑Never wind the cord around the appliance and do not bend it
❑Ensure that the power cord does not come into contact with
hot parts of this unit.
❑Make sure the appliance has cooled down before cleaning
and storing it.
❑The temperature of accessible surfaces may be very high
when the appliance is operating. Never touch these parts, of
apparatus, to avoid burning itself.
❑Make sure the appliance never comes into contact with
flammable materials, such as curtains, cloth, etc...& the
power cord and plug do not come in contact with water.
❑Before cleaning, always unplug the appliance from the power
supply and let it cool down.
❑This appliance is not intended to be operated by means of an
external timer or separate remote-control system.
❑Always place the unit on a flat surface. Ensure, also, not to
cover the device and not to put anything on it.
❑Always remove the plug from the wall socket when the
appliance is not in use.
❑When using an extension lead always make sure that the
entire cable is unwound from the reel. Use solely CE
4

approved extension leads. Input power must be at least 16A,
250V, 3000W.
❑Incorrect operation and improper use can damage the
appliance and cause injury to the user.
❑This device, designed for home use, complies with standards
relating to this type of product.
(*) Competent qualified person: after sales department of the
producer or importer or any person who is qualified, approved
and competent to perform this kind of repairs
SPECIFIC WARNING FOR IRONS
• Before placing the iron on its stand, Always place the iron
stand on a flat, stable surface.
• Always unplug the iron before filling
• After use, unplug the iron and place it on its stand on a flat
surface.
• The iron must not be left unattended when it is connected to
the main power.
WARNING: BURN HAZARD.
• During operation, the temperature of the
appliance surface may be hot.
• The heating parts remain hot, long time after
stopping the machine.
• The symbol "Hot Surface" warns the user
that the apparatus walls may become hot, and
to take precautions.
GENERAL INFORMATION
5

The symbol "OPEN BOOK" means a recommendation
to read important things contained in the record.
The symbol "BIN" crossed out, abbreviation WEEE
(Waste of Electrical and Electronic Equipment) means
that at the end of life, it should not be discarded with
household waste, but filed to the sorting of the locality.
Waste recovery can help preserve our environment.
The symbol "STEAM" warns the user that steam can
escape from the unit and to take all necessary
precautions. (Risk of burns)
The symbol "CE" is the guarantee of compliance with
harmonized European standards, voluntary, reflecting
the essential requirements into technical
specifications. These standards are not mandatory
but are guarantees of compliance with essential
requirements.
The symbol ROHS (Restriction of use of some
Hazardous Substances) on the Environmental
Protection, certifies that for each of the five hazardous
substances • Lead • Mercury • (hexavalent) chromium
• products for protection against flames PBB and
PBDE, the peak concentration is equal to or less than
0.1% of the weight of homogeneous material, and
0.01% for the 6th • cadmium.
The symbol "TRIMAN" indicates that the consumer is
invited to dispose the product as part of a separate
collection (eg recycling bin, waste, voluntary intake
point).
6

For more information : http://www.quefairedemesdechets.fr
7

DESCRIPTION
1. Steam express knob
2. Release Handle lock button
3. Comfort handle
4. Water filling aperture
5. Water tank button
6. Thermostat selector
7. Stand for locked handle
8. Non coating soleplate
General description
Warning: If the fabric consists of various kinds of fabrics, always select the
temperature required by the most delicate fibre.
Fabric
Temperature
control
Ironing methods
Synthetic fibres
nylon
·
Iron the reverse side. Do not use the
spray function, as spraying could cause
stains.
Silk
wool
··
Iron the reverse side to prevent shiny
spots.
Cotton
linen
···
You’d better set the iron to a steam
position.
Before the first use
Please, Test the iron on clean cloth.
During this operation a light smoke can escape the sole or iron for a few
moments; This is normal.
During ironing, the thermostat switches automatically at regular intervals to
maintain a constant temperature.
It is always easier to iron fabrics on slightly damp clothes.
8

USE
● Unroll the power cord completely.
● Check that the tension in force in the country where you are corresponds to
that indicated on the apparatus.
● Connect the apparatus in a correct socket-outlet, (and connected to the
ground if the unit is Class I), to avoid any danger.
● Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
● Stand the appliance on a table or flat & stable surface.
● The item must not be left unattended when it is connected to main supply.
● The item is not to be used, if it has been dropped or if there are visible signs
of damage or if it is leaking.
● Never modify the appliance in anyway.
● To avoid a circuit overload, do not operate another high wattage appliance
on the same circuit.
● When the iron is returned to its iron rest, make sure that the surface that
supports the iron rest is stable.
● The iron must be used and rested on a stable surface.
● Fill the tank (up to the maximum level) before connecting.
● Select the desired temperature (see above table), the iron gets hot.
● When the desired temperature is reached, the iron is ready for use.
● After use, set the thermostat and unplug the iron.
Filling with water
To fill the tank :
Press the button under the iron handle to unfold.
The handle will lift automatically.
Detach the tank by pulling the handle backwards by
the button of the tank.
Open the tank and fill with clean water.
Replace the tank and secure it using the button on the
tank.
(Do not exceed the maximum level).
9

Shot of steam
Set the thermostat to max. wait until the iron heats up sufficiently.
Place the iron over the ironed fabric and firmly press the button to release steam.
It may be useful to press repeatedly for increased efficiency.
CLEANING AND MAINTENANCE
Before cleaning switch off the appliance
Always disconnect the apparatus and to let it cool before cleaning.
Any deposits, starch residue or size left on the plate can be removed using a
damp cloth or an un-abrasive liquid detergent.
Avoid scratching the plate with steel wool or metallic objects.
The plastic parts can be cleaned with a damp cloth then wiped over with a dry
cloth.
Never plunge the apparatus in water or all other liquid !
CAUTION : The ceramic sole you will use will have a long life if you take care of it.
Do not scratch or damage it with metal objects.
STORAGE
- Disconnect the plug of the iron from the socket.
- Ensure the unit is completely cool and dry.
- Empty the reservoir.
- Do not wrap the cord around the appliance, as this will cause damage.
- Always put the iron away in a vertical position.
- Keep the appliance in a cool, dry place.
10