tecnotelai E412 User manual

E41
Via Bonazzi, 4 - 40013 Castel Maggiore (BO)
Tel. [phone] (10 linee) - Fax [phone]
[email protected] - www.tecnotelai.it
!/!1 2
!
2
Turn over the bench and secure the 2 cross bars in the outer holes
of the legs with 4 flanged screws TE 8x16 with nut.
Place the staves on a surface with the flat side facing up, and after
inserting the oval head screws 8x35 in the holes (8 in the bench of
1000 and 12 in the bench of 2000). Insert the legs and tighten the
nuts.
1
WOODEN BENCHES / LOCKERS + BENCHES
installation instructions
FITTING THE BENCH

E41
Via Bonazzi, 4 - 40013 Castel Maggiore (BO)
Tel. [phone] (10 linee) - Fax [phone]
[email protected] - www.tecnotelai.it
!/!2 2
4
Attach the rods to the bench with 2 screws TCEI 8x16
(2 rods for the bench of 1000 and 3 for the bench of
2000).
Mount the bench as in step "1" and "2".
3
ASSEMBLY OF BENCH WITH BACKREST
5
Insert the shelf in the rods and secure it with 2 or 3
screws 5x50 with nut.
6
Attach the stave of the backrest and the hanger with
countersunk head Allen screws 8x30 (2 for the bench of
1000 and 3 for the bench of 2000).
7
Supplied with the bench there are 2 or 3 plates, to be
used flat for the fixing of double-sided benches or to be
bent for wall mounting.
9
Turn over the bench and secure the 3 cross bars (2
under the staves and 1 in the back) with 6 flanged
screws TE 8x16 with nut.
Place the staves on a surface with the flat side facing
up, and after inserting the 8 oval head screws 8x35 in
the holes.
Insert the legs from the side of the 4 holes and tighten
the nuts.
8
ASSEMBLY OF BENCH WITH LOCKER
10
Fix the 2 lateral corners to the legs, each with 2
expansion bolts (insert the largest part in the holes and
block with the bolt).
11
Place the locker on the support and lock it with 4 nails.
Crush to lock