Tectonic PL-11 User manual
Quick Start Guide
Speakers, Cross-over and Amps
PIN OUTS
Ribbon 12ΩDML 8Ω
1+
1-
2+
2-
400W RMS 240W RMS
PIN OUTS
Ribbon 12ΩDML 4Ω
1+
1-
2+
2-
800W RMS 240W RMS
PL-11 (One ribbon, one DML)Subwoofer
Subwoofer PL-12 (One ribbon, two DMLs)
Weight - 68 lbs • 30.8 kg
Weight - 98 lbs • 45 kg
www.tectonicaudiolabs.com
+(425) 686-7640
HP 7kHz
~0.13ms delay gain -2dB
gain -2dB
variable delay
Sub Ribbon
HP 100Hz LP 16kHz
DML
18dB/Oct Butt
LP 100Hz
18dB/Oct Butt 18dB/Oct Butt12dB Oct Butt
Parametric EQ Settings:
1 - 225Hz, -4dB, Q 3.79, B/W 0.38
2 - 400Hz, -2dB, Q 4.0, B/W 0.36
3 - 1.45kHz, -3dB, Q 2.73, B/W 0.525
4 - 8.61kHz, -3dB, Q7.63, B/W 0.18
HP 7kHz
~0.13ms delayvariable delay
Sub Ribbon
HP 100Hz LP 16kHz
DML
18dB/Oct Butt
LP 100Hz
18dB/Oct Butt 18dB/Oct Butt12dB Oct Butt
Parametric EQ Settings:
1 - 225Hz, -4dB, Q 3.79, B/W 0.38
2 - 400Hz, -2dB, Q 4.0, B/W 0.36
3 - 1.45kHz, -3dB, Q 2.73, B/W 0.525
4 - 8.61kHz, -3dB, Q7.63, B/W 0.18
Temporary Live Rig
(Span set or chain hoist)
(Optional pull-backs)
HS-12 (11)
Shackles
CGF (pr)
QPL (pr)
QPL (pr)
QPL (pr)
QPL (pr)
CBL (pr)
CTL (pr)
CTL (pr)
EHL (pr)
00, 30, 50, 70, 100, 150angles available
M8 Bolts
www.tectonicaudiolabs.com
+(425) 686-7640
M8 Bolts
M8 BoltsM8 Bolts
M8 BoltsM8 Bolts
M8 BoltsM8 Bolts
Installed Flying Rig
(Optional pull-backs)
00, 30, 50, 70, 100, 150angles available
No Bridles!
(Optional CGFs)
Shackles
Suspension Cables
Suspension Cables
EHL (pr)
Bolts (pr)
5/16th x 1.25”
Bolts (pr)
5/16th x 1.25”
Bolts (pr)
5/16th x 1.25”
Bolts (pr)
5/16th x 1.25”
CBL (pr)
CTL (pr)
CTL (pr)
EHL (pr)
www.tectonicaudiolabs.com
+(425)686-7640
M8 BoltsM8 Bolts
M8 BoltsM8 Bolts
M8 BoltsM8 Bolts
M8 BoltsM8 Bolts
VESA Mounting
Optional VML Mount
400mm x 400mm
486 mm x 325 mm
Stand-o spacing usable
w/ adaptable mounts
M8 Bolts / Screws
1.25mm pitch
www.tectonicaudiolabs.com
+(425) 686-7640
Wall Mount
Floor Stand
Ceiling Mount
Other manuals for PL-11
1
This manual suits for next models
1
Table of contents
