Tecware Exo Lite User manual

Quick Start Guide

www.tecware.co
1
www.tecware.co
1
Buttons & Functions
Exo Lite：
Exo Plus：
Exo Elite：
1
2
Button (Left Click)
Button (Right Click)
3Button (Scroll Wheel)
4Button (Forward)
6
7
Button (DPI Loop)
Toggle Light Modes (Exo Lite)
Toggle Polling Rate (Exo +)
Toggle Lift-off Distance (Exo Elite)
5Button (Backward)
8AERO Cord
Optical Sensor
*Functions for Buttons 1 - 6 can be changed in the software.
9PTFE Mice Feet
10
1 2
8
3
6
45
9
10
7

www.tecware.co
2
DPI Settings
Enable/Disable the DPI Level.1.
DPI Level Color (Scroll Wheel LED)3.
Enable to set individual Horizontal and Vertical DPI.2.
Increase/Decrease DPI4.
1 3
2
4

www.tecware.co
3
Recording & Assigning Macros
Click “Macro Editor”.1.
Adjust the settings for your macro (Automatic insert delay, Cycle until key released etc.).3.
Macros save automatically. You may close the window once done.5.
Click “New macro” and input a name for your macro.2.
Once ready to record, press “Start record” and carry out the actions for your macro. Once done, press
“Stop record”. You may insert unrecordable actions such as Mouse clicks by pressing “Insert event”.
4.
To assign a macro to a button, click on the button function, click “Macro”, and select the macro you want
to assign. Click “Apply” to save settings.
6.

www.tecware.co
4
• To access additional features, please download the EXO Software from www.tecware.co
Software
• 1 Year. Please contact your local distributor for support.
Warranty
• PC system with USB port
• Windows XP / VISTA / 7 / 8 / 10
System Requirements
Installation
•
Plug your TECWARE EXO into the USB port of your PC.
No driver installation is required for this product, the operating system should auto detect the mouse when
you plug it into your computer.

www.tecware.co