Teemi TMCT-07 User manual

No S
leep
Customer FAQ
1.How to set up the scanner?
Set-up is quite straight forward, simply plug the scanner into a computer via the supplied USB lead, the
device is found without any drivers required. Or you just plug the USB dongle into a spare port and you can
use the scanner wirelessly.
The scanner reads the barcode into memory and then dumps its memory of read barcodes into a text file (or
spreadsheet, or database).
The scanner does not interpret what the barcode is, it just "types" out the numerical equivalent of the
barcode. Once you acquire the barcodes, you have to correlate them to something more meaningful by
either purchasing a service that will interpret the barcode and relate it to a product, or you can use your own
internal inventory system to assign the barcodes to specific products.
2.If you use this scanner wirelessly, when you hear a beep after a scan, but no data is transmitted to
the PC. How to do?
Due to the factory test of the barcode scanner and adapter is separately, some scanners may have
not paired with the included adapters in the package successfully.
Please finish pairing according to the following operations. It takes around 3-15 seconds.
3.Why can the scanner not read the barcodes?
The possible reason is that the setting is off by default, for some barcode types are not commonly used. You
need to activate a specific barcode type to get it to work. Please feel free to contact our Customer Service
Team for further assistance if you know the exact type of barcode that you are referring to.
4.The scanner reads the extra start and stop characters of each barcode, it puts an A at the beginning and a
B at the end. How do we program the scanner to read only the numbers? We use Codabar Mod 10
barcodes.
Example of scan: A37005200422885B
Scan needed: 37005200422885
Please contact our Customer Service Team for programming file.
5.The barcode scanner keeps beeping and the LED indicator is constantly flashing red, but no laser is shining.
There should be some issue with the product welding. Please do not hesitate to contact our Customer
Service Team, we provide hassle-free warranty replacement for defective units.
6.How can i turn off or lower down the sound of the barcode scanner?
Please contact our Customer Service Team for programming file.
7.If I lost the USB receiver, can I use a substitute or buy a replacement?
Each scanner is paired with one USB receiver. If the USB receiver is lost, there is no substitute or
replacement. Please keep the USB receiver well with the scanner.
8.When I use the scanner to read a barcode of an item, I get a different result from the barcode itself.
How to do?
Please send us a clear picture of the barcode and the result you get, our customer service will help
you to solve the problem.
23
1
Plug in 2.4G adapter to PC Read 'Enter Setup' Read '2.4G pairing'
7
Quit Offline Mode

Packing list:
▶ TMCT-07 Barcode Scanner
▶ USB Cable * 1PC
▶ Quick Start Guide
▶ Inventory mode setup card
▶ Power Adapter * 1PC
▶ USB wired + 2.4G
▶ Built-in FLASH memory, supports breakpoint resume
▶ Can store 2600 pieces of Code-128 codes under offline state
▶ Supports Windows XP/7/8/CE, Mobile OS
Email: [e-mail]
Website: www.teemistore.com
TMCT-07
www.teemistore.com
Q u i c k S t a r t G u i d e
TMCT-07 Barcode Scanner Overview
Performance Characteristics:
Appearance:
Power
USB Port
2.4G wireless mode USB Wired mode
Functions Setup:
TMCT-07 Barcode Scanner can setup all
default functions through reading the setup
barcodes.
Enter Setup
Read function barcode
Exit with Save
Light source
Decode Capability
Resolution
Nominal Working Distance
Decode Rate
Scan width
Decode mode
Scan mode
Print Contrast Minimum
Scan angles
Cylinder Horizontal Scan
Indication
Radio Range
Interfaces Supported
Processor
EEPROM
Wireless Communication
Battery
Laser LED 650+/-20nm
3mil
6~30cm
100 decodes per second
30mm
Single-Line Aiming
Auto off mode / Manual mode
30%
Roll 30° Pitch 75° Yaw65°
Diameter 35mm
Beeper, LED
10m Visual range
USB2.0
ARM 7 72MHz
256K, can store thousands of barcodes
1500mAh lithium battery
Code bar, Code 11, Code 93, MSI, Code 128,
UCC/EAN-128, Code 39, EAN-8, EAN-13,
UPC-A, ISBN, Industrial 25, Interleaved 25,
Standard 25, 2/5 Matrix
2.4G wireless transmission
TMCT-07 integrates high-performance processor and decoding board, it has fast decoding, high-precision reading ability, and high anti-interference ability. It can easily
read barcodes on paper, goods and other media. The DOF is a great improvement compared with similar products. It also boosts high scanning speed and powerful
reading ability with high accuracy.
Deep sleep technology no need to start up, it will scan as you press the button.
TMCT-07) LED Indicators
Beeper
Beeping Meaning
One long beep, high tone
One short beep, high tone
One long beep, low tone
Two short beeps, high tone
Three short beeps, tone descending
from high to low
Three short beeps, tone ascending
from low to high
Power on
Read barcode, with green LED on (1s) and off quickly
Configuration error, with purple flashing; Or transmit buffer
full, with green LED on and off quickly
Power off
Enter or Exit Setting mode, with purple LED flashing
Configuration correct, with purple LED flashing;
Indicator Colour Meaning
Blue LED on (1s) and off quickly
Yellow, Flashing (On/Off ratio 1:1)
Good Read, with one short beep (high tone)
Indicates the TMCT-07 Scanner in Setting mode
The red light is charging indicator The red indicator will light during charging, and off when full
charged
When you press the SCAN button, if the scanner has two short beeps (high tone) and stop scanning,
it means the battery is dying.