tekkiwear DGS-111 User manual

Mosquito catching lamp – DGS-111
USER MANUAL
Product descripon
Product name: Photocatalysis mosquito trapping lamp
Voltage: 5V
Product power: 5W
Method of use
1. Please use the same voltage as the descripon.
2. To turn on the unit simply plug the USB cable of the unit into a 5V power source (cell phone
charger for example) . At this point, the fan and LED light should start working. To turn o the
equipment, disconnect the power cable.
3. When cleaning the mosquito debris, turn o the power supply rst. Pick up the mosquito lamp
with one hand and place it on top of the trash can (to prevent mosquitoes from falling on the
oor). Pull out the mosquito storage box with the other hand in reverse to remove the
mosquitoes.
4. Aer cleaning the mosquitoes, the machine can be put back into the room for use.
Working Principle
This equipment is a photocatalysis inhalaon mosquito killer. LED lamp bulbs are used in the
lamp tube. The generated light will aract the mosquito to approach the light source. The air
generated by the fan will quickly inhale it into the mosquito box of the equipment. The insects
are then dried and dehydrated to death. The mosquito killer itself is non-toxic, smokeless and
odorless.

Issues requiring aenon
1. When using the mosquito killer, turn o the light or reduce the light in the mosquito killing
area as much as possible to avoid interference from other light sources (such as uorescent lamp,
TV set, light from outside the window, etc.). Avoid strong wind (such as fan, air condioner, etc.)
blowing directly on the machine. The best eect is to use the machine in an enclosed space
without people present.
2. When the product is working, it is strictly forbidden to look at the light source for a long me,
to avoid eye irritaon caused by the light source.
3. During use, the mosquito killer should be placed in a place where children cannot touch it. Do
not insert ngers or metal objects to avoid accidents.
4. If the power cord or fan is damaged, to avoid danger, send it to a professional for maintenance
or replacement.
5. When not in use for a long me, unplug the power cord and store it properly in a safe place.
Environment of use
For indoor use only (not suitable for stables, barns or similar locaons).
Common fault guide
Cannot start the whole machine
May be plugged in incorrectly
Check there is electricity at the power supply.
The fan has an abnormal sound
There may be a foreign body in contact with the fan.
Clean the lamp and remove any foreign body, mosquitoes, etc...
The light is on but the fan does not turn on or the fan is on but the light is not.
This is a product fault. Please contact the company's customer service. If you are unable to
contact customer service, ask the dealer where you purchased the product for assistance.