StarTech.com LAPTOP-SIT-STAND User manual

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: May 18, 2022 3:20 PM
3
1
Product Diagram (LAPTOP-SIT-STAND)
Front View
Bottom View
Component Function
1Slide Button • Push-in to Raise or Lower the workstation
2Workstation Surface • Place a laptop, keyboard, and a mouse
3Upper Frame • Supports the workstation. Adjusts the Height in Six
Dierent Positions from 1.8 to 15.9 in (45 to 405 mm)
4Lower Frame • Stabilizes the workstation. Foam pads at the bottom
protect the desk surface
5Finger Guard • Helps prevent trapping your ngers when Lowering
the workstation
Ergonomic Adjustable Laptop Sit Stand Desk Converter
Package Contents
• Desktop Sit-Stand Workstation x 1
• Quick-Start Guide x 1
Requirements
For the latest manuals, product information, technical specications, and declarations of
conformance, please visit: www.startech.com/LAPTOP-SIT-STAND
Installation
WARNINGS!
Do not exceed the weight capacity of this product. Overloading this product might
result in injury or property damage. This product can support the following weight: up
to 17.6 lb (8 kg).
When adjusting the height of this product, ensure that the mounted equipment is
properly secured and the weight is supported until the locking mechanism is fully
engaged. Adjust the height at a slow speed to prevent any equipment instability.
Failure to follow these guidelines may result in property damage and/or personal
injury.
Stored Energy Hazard! This product contains a spring mechanism that can cause the
assembly and/or mounted equipment to move forcibly and quickly upwards when the
slide button is pressed.
Pinch Hazard! Keep your ngers clear from moving components. Do not place your
ngers past the nger guard at the bottom of the workstation surface when lowering
it.
1. Cut the security plastic Tie that Holds the Upper Frame to the Lower Frame .
2. Carefully Remove the foam Pad installed on the Slide Button.
Operation
When adjusting the height of this product, always use two hands to ensure a
controlled movement.
If the slide button is pushed in and without releasing, you can adjust the height of the
upper frame in one movement to any of the available height positions. Until the slide
button is released, the height of the upper frame cannot be locked.
Due to the spacing of the locking holes, the user must continue to support the
workstation weight until the locking mechanism is engaged.
2
4
5

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or
symbols of third-party companies not related in any way to StarTech.com. Where they occur these references
are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.
com, or an endorsement of the product(s) to which this manual applies by the third-party company in question.
StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other
protected names and/or symbols contained in this manual and related documents are the property of their
respective holders.
Warranty Information
This product is backed by a 2-year warranty. For further information on product warranty terms and conditions,
please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors,
employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential,
or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the
product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this
statement may not apply to you.
Safety Measures
• Read the entire manual and ensure the instructions are fully understood before assembling and/or using
this product.
Mesures de sécurité
• Lisez tout le manuel et assurez-vous que vous comprenez les instructions avant de commencer à
assembler et utiliser ce produit.
安全対策
• 最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解してから組み立て作業を始め
て下さい。
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Misure di sicurezza
• Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare e
a utilizzare questo prodotto.
Säkerhetsåtgärder
• Läs hela manualen och se till att du förstår instruktionerna innan du börjar montera och använda
produkten.
Raise or Lower the Workstation
1. Position one hand on the Slide Button and the other hand on the opposite side
of the Workstation Surface. (Figure 1)
2. Push-in the Slide Button while slowly adjusting the Height Position of the
Workstation Surface. Release the Slide Button for the Upper Frame to lock in
place on the next available Height Position.
Figure 1