TEKSAN GO ON 600W User manual

Portable Power Station
User Manual
600 W

3
Dear Customer
Thank you for choosing Teksan GO ON 600W Portable Power
Station.We want your product, manufactured with high quality and
technology,to offer you the best efficiency. Therefore, please read
this manual and the other documents provided carefully before using
the product and keep them as a reference. If you give the product
to someone else, hand over the instruction manual with it. Observe
all information and warnings in the user manual and follow the
instructions.
For more information:
Simply scan this code
with your smartphone.

5
TEKSAN JENERATÖR ELEKTRİK SANAYİ VE TİCARET A.Ş.
Yenidoğan Mah. Edebali Cad. No:12 34791 Sancaktepe / İSTANBUL
TABLE OF CONTENTS
1. Before You Start............................................................................ 6
2. General Safety............................................................................ 6-7
3. What is in the Box?....................................................................... 8
4. Product Descriptions..................................................................... 9
5. LED Display Symbols and Explanations....................................... 10
6. Operation ............................................................................... 11-12
7. Charge ................................................................................... 13-14
8. Discharge.................................................................................... 15
9. Specifications ............................................................................. 16
10. Important Notes........................................................................ 17
10. Terms of Warranty............................................................... 18-22
11. Contact Us........................................................................... 23-24

6
1. Before You Start
1. Please completely read the user manual before using this product.
TEKSAN will not be liable for any damage to products, personal
property, or serious personal injury due to misuse.
2. Do not use incompatible components or replace components in
anyway without following the instructions provided with TEKSAN spare
part. Otherwise, you may not receive after-sales service from TEKSAN
under the warranty conditions.
3. Before assembly, installation or use, it is necessary to read and
follow all instructions and warnings in the user manual for the correct
use of the product to prevent damage or serious injury.
4. This manual contains safety, operation and maintenance
instructions.Images and specifications are provided for reference only
and are based on the actual product.
2. General Safety
WARNING - When using this product, basic precautions must always
be observed, including the following:
Read all instructions before using the product
1. Close supervision is necessary when the product is used near
children to reduce the risk of injury.
2. Do not put your fingers or hands inside the product.
3. Do not expose the product to rain or snow.
4. Using a power supply or charger not recommended or sold by the
manufacturer of the product may result in a risk of fire or personal
injury.

7
5. Do not use a damaged or modified product. Damaged or replaced
batteries can cause unforeseen events to occur resulting in fire, explosion
or risk of injury.
6. Do not disassemble the product. If the product requires service or
repair, take it to an authorized service. Improper reassembly may result in
a risk of fire or injury.
7. Ensure that servicing is carried out by qualified repair after sales staff
using only original TEKSAN spare parts this will ensure that the safety of
the product is maintained.
8. Turn off the product when not in use.
9. Store the product in a cool and dry place.
10. Do not store the product in a hot or humid environment.
11. Operating temperature should be in the range of -10°C and 40°C.
12. If the product will not be used for a long time, you should charge it
every three months.
13. When charging a product; you may feel that the product is hot, this is
a normal operating condition and there is no need to worry.
14. Under normal conditions, battery performance declines over several
years.
15. Do not clean the product using noxious chemicals or detergents.
16. Improper handling, dropping or power overload may cause damage to
the product.
17. When disposing of secondary cells or batteries, keep cells or batteries
with different electrochemical systems separate from each other.

8
3. What is in the Box?
TEKSAN GO ON 600W
Portable Power Station X1
User
Manual X1
Adapter X1 Car Charging
Cable X1
MC4 Solar Charging
Cable X1

9
1. DC Input
2. Display
3. QC3.0 Output
4. USB-C Output
5. DC/USB Power Switch
6. AC Power Indicator
7. AC Power Switch
8. AC Power Socket
9. LED Lighting
10. LED Lighting Button
4. Product Descriptions
2
1
4
7
6
8
3 9 105

10
5. LED Display Symbols and Explanations
Battery Level
(% symbol flashes when
charging)
Remaining full charge time or
remaining usage time
Input/Output Power
Symbols of the DC output section:
When the DC/USB power button is
pressed, the symbols (DC, USB - A ,
USB - C) are always on.
AC Power Output
LED Display Descriptions
1 2 3 4 5

11
6. Operation
1. AC Power Switch
Press the AC power button for one second to energize the AC power
output. When the AC power output is energized, the AC power
indicator symbol lights up on the display screen. To de-energize the AC
power output; simply short press the AC power button. The AC power
indicator light turns off after this operation.
2. DC Power Switch
To energize the DC power output; press the DC power button for
a second. When the DC power output is energized, the DC power
indicator symbol lights up on the display screen. To de-energize the
DC power output; simply short press the DC power button. After this
operation, the DC power indicator light turns off.
(DC power button controls USB-A, USB-C and 12VDC cigarette lighter
output).
3. LED Lighting
To turn on the LED Lighting, first press the DC button, then press
the LED Lighting button. The LED Lighting has three modes and the
switching sequence is as follows: sleep light mode, illumination mode
and SOS alarm light status.

12
4. Sleep Function
USB - A, USB - C, LED Lighting and 12 VDC output (cigarette lighter
output) interface are automatically shut off and enter sleep mode after
3 minutes when there is no load or the power is lower than 1W. The
AC output interface is automatically shut off and enter sleep mode for 8
hours after 3 minutes when there is no load or the power is lower than
8W. Operation method: After turning on the DC power switch, press
the LED button on one hand while pressing the DC power button on
the other hand, and immediately release the LED button and DC power
button, the SLP ON symbol will light up on the screen for 5 seconds,
which means the sleep function is turned on. In the same operation,
the SLP OFF graphic is displayed. The symbol lights up for five seconds
during shutdown of the sleep function.
5. AC Power Output
a. Press and hold the AC switch to switch to AC mode. To power
the unit, insert the AC power plug into the product’s power output.
b. The rated output power of the AC power port of this product is
600W, and the power of electrical appliances at the output end
must be less than or equal to the rated power. The product fan is
automatically activated during charging and discharging.
6. DC Cigarette Lighter Output
The rated output power of the DC cigarette lighter port is 120W and
the electrical power at the output end must be equal to or less than the
rated power.
7. Protection Mode:
TEKSAN GO ON 600W automatically alarms in case of short circuit or
overload in an external device. In this case, the output device must be
unplugged and the TEKSAN GO ON 600W must be restarted.

13
7. Charge
AC Charging Input
PV Charging Input
Car Charging Input

14
1. Plug the supplied car charging cable into the
cigarette lighter socket and start the vehicle. You
can charge your product with 12V and maximum 8A
charging current. When the charging progress is 100%
and remains constant, the product is fully charged.
2.When the product is fully charged, disconnect the
car charging cable from the product and the car.
Car Charging
1. Place the TEKSAN GO ON Solar Panel under direct
sunlight.
2. TEKSAN GO ON 600W can be charged by connecting
to the solar panel. When the charging progress is 100%
and remains constant, the product is fully charged.
3. Solar charging performance can vary greatly
depending on the weather, ambient temperature,
sunlight intensity, the angle of the solar panel in respect
to the sun as well as other factors.
PV Charging
Plug it into a standard wall output using the
AC adapter of TEKSAN GO ON 600W and start
charging. When the charging progress is 100%
and remains constant, the product is fully charged.
Once the product is fully charged, unplug the AC
adapter. This process takes about 5-6 hours.
AC Charging

15
8. Discharge
Laptop (41.4Wh)
About 10-11 times
TV (75W)
Approximately 6-7 Hours
Slow Cooker (200W)
Approximately 2-3 Hours
Smartphone (10Wh)
About 40-45 times
Led Bulb (20W)
Approximately 20-23 Hours
Mini Refrigerator (40W)
Approximately 11-12 Hours
Drone (89.2Wh)
About 5-6 times
Electronic
Hand Tools (40W)
Approximately 11-12 Hours

16
9. Specifications
Model TEKSAN GO ON 600W
Capacity 576Wh (12.8V 45Ah)
Output Waveform Pure Sine Wave
Input AC Input: 27V 4.5A (120W Max.)
Solar Panel Input: 12-29V (8A Max.)
Car Charging Input: 12V 10A (Max.)
Output AC Output: 220-240V 50Hz
Rated Power: 600W
DC Output*1: 12V 10A (120W Max.)
QC 3.0 *2: 5V 3A/9V 2A/12V 1.5A (18W Max.)
USB-C *1: 5V 3A/9V 3A/12V 3A,
15V 3A/20V 3A (60W Max.)
Cell Type LiFeP04 Battery
Cycle Life 3500+
Charge Operating Temperature 0°C/40°C
Discharge Operating Temperature -10°C/40°C
Storage Temperature -10°C/40°C
Protection
Temperature Control, Overvoltage
Protection, Short Circuit Protection,
etc.
Dimensions 298 x 174 x 197mm
Weight 6.7 Kg

17
10. Important Notes
1. Product Fails to Supply Power
a. Please make sure that the AC power switch or DC power switch
is turned on. (If the ambient temperature is not in the range of
-10°C-40°C, the product may not have power output).
b. When connecting the power plug of electrical equipment to
the product, be sure to insert the plug securely. If there is water
or foreign matter on the charging cable or charging input socket,
please clean it.
c. Please observe the battery indicator light. If the battery indicator
light blinks, it means you need to charge the product.
d. Please check whether the voltage and power rating of the
equipment you are charging is higher than the output power rating
of this product .
e. If the upper limit value is exceeded, short circuit protection,
overcharge protection, overcurrent protection, discharge
protection, temperature protection, overload protection, etc. are
activated and the product will automatically shut down. Please
check whether the protective circuit is normal.
2. What is the Capacity of 576Wh?
“Wh” refers to the energy consumed. 576Wh means that the product
can power a 576W appliance for one hour. Of course, it is capable of
supplying power to a device consuming 100W of power for 5.7 hours
(this is a theoretical value, the actual usage time will be reduced by
10-15% due to heat loss and power conversion loss).
Please note that the actual available Wh value is approximately 85%-
90% due to 10%-15% discharge loss during use.

18
10. Terms of Warranty
This warranty undertakes to repair the product free of charge under the
conditions set out in the following terms.
Please read the warranty document carefully and keep it in a safe place.
1. The warranty period starts from the invoice date of the product and
is 1 year.
2. Provided that the product is used as shown in the product
identification and user manual and has not been serviced, repaired or
otherwise interfered with by persons other than authorized after sales
staff of Teksan Generator A.Ş., it gives warranty for the whole product
including all of its parts against material, workmanship and production
defects for the period specified above from the invoice date of the
product.
3. In the event that it is understood that the product is defective;
a. Rescission of the contract,
b. Request for free repair,
c. Request for a discount on the sale price,
d. Request for the replacement of the sold product with a
defectfree equivalent
4. If the consumer chooses the right to free repair from these rights,
the seller shall be obliged to repair or have the product repaired without
any charge under labor cost, replacement part cost or any other name
whatsoever. The consumer may also exercise the right to free repair
against the manufacturer or importer. The seller, manufacturer and
importer are jointly and severally liable for the exercise of this right by
the consumer.

19
5. If the consumer exercises the right to free repair, and;
- The same malfunction recurs within the warranty period,
- The maximum time required for repair is exceeded, or
- A report is issued by the authorized service station, seller,
manufacturer or importer indicating that it is irreparable;
The consumer may demand from the seller the return of the product,
the price discount in proportion to the defect or, if possible, the
replacement of the product with a defect-free equivalent.
The seller may not refuse the consumer’s request. If this request is
not fulfilled, the seller, manufacturer and importer shall be jointly and
severally liable.
6. The maximum repair period of the product shall not exceed 20
business days during the service time as specified in the relevant
legislation. This period starts on the date of notification of the product
failure to the authorized service station or the seller within the warranty
period, or from the date of delivery of the product to the authorized
service station outside the warranty period. If the failure of the product
under warranty is not repaired in 20 business days, the manufacturer
or importer shall have to allocate another product with similar
features to the consumer until the repair of the product is completed.
Manufacturers or importers are released from this obligation if another
product with similar characteristics is not desired by the consumer. If
the product fails within the warranty period, the time spent in repair
shall be added to the warranty period.
7. Damages and malfunctions arising from the use of the product
contrary to the user manual are not covered by the warranty. Under the
following contrary conditions, warranty support shall not be provided

20
a. Malfunction or damage caused by failure to observe the
precautionary measures described in the user manual.
b. Failure or damage caused by improper storage and handling
(complete discharge of the batteries, not fully charged every 3
months when not in use).
c. Failure or damage caused by using an adapter other than the
power adapter supplied with the product.
d. Failure or damage caused by improper repair, disassembly or
modification of the product outside authorized service.
e. Failure or damage caused by dropping, vibration, water leakage,
condensation or similar reasons after purchase.
f. Failures or damages caused by other natural disasters such as
fire, earthquake, flood.
g. Any change in appearance or discoloration caused by use or
ambient conditions.
h. Failure or damage caused by use at temperatures other than the
declared operating temperature.
8. In the case of disputes that may arise regarding the exercise of
rights arising from the warranty, the consumer may apply to the
Consumer Arbitration Committee or the Consumer Court in the place of
residence or in the place where the consumer transaction is made.
9. In the case that this Warranty Certificate is not provided by the
Seller, the consumer may apply to the General Directorate of Consumer
Protection and Market Surveillance affiliated with the Ministry of Trade.