Telect WaveTrax 027-2000-4264 User manual

© Telect, Inc., All Rights Reserved. 129008-1 A0
509.926.6000 :: telect.com 1
WaveTrax
027-2000-4264 :: 2" Express Off-Ramp Assembly
Installation Guide
®
Telect’s 2" Express Off-Ramp Assembly is a Telect WaveTrax
Cable Management System component that allows ber cable
to exit anywhere along a ber cable management trough. Model
027-2000-4264 ts all 4" through 12" Telect troughs.
The Telect 2" Express Off-Ramp package contains the Express
Off-Ramp, an Express Off-Ramp bracket, and all of the hardware
required to secure the assembly to a Telect horizontal trough. In
addition, the necessary hardware for attaching 2" CableLinks or
split tube vertical runs are included.
Overview
Installing Express Off-Ramp Assembly on a Telect Trough
2. Then screw in two captive thread-forming screws.
1. Slip assembly over trough
Telect trough
(4" deep by 4", 6", 8", or 12" wide,
in 5' or 6' lengths.)
Installing an Express Off-Ramp
assembly to a non-compatible
trough—or a mid-span on a
compatible trough—requires a Telect
bracket.
Telect bracket attached to a rail
(P/N 027-1000-4004)
CableLink
(P/N 027-0000-4200)
Installing Telect 2X2 CableLinks to
Express Off-Ramp
Installing Telect 2"Flex Tubing to
Express Off-Ramp
Tube Clamp
(P/N 027-1000-4290)
20' Tube
(P/N 027-2902-0020)
Installing Telect 2"Flex Tubing to
Express Off-Ramp with Optional
Split-Tube Bracket
(Bracket sold separately.)

© Telect, Inc., All Rights Reserved. 129008-1 A0
509.926.6000 :: telect.com
2
WaveTrax
027-2000-4264 :: 2" Express Off-Ramp Assembly
Installation Guide
®
Captive Thread-Forming Screws for
Securing Express Off-Ramp Bracket to
Any Horizontal Position Along a 4-in.
Through 12-in. Telect Trough
* Model 027-2000-4263
** Express Off-Ramp & Bracket are
pre-assembled at the factory.
*** Telect mounting brackets are used for
supporting Telect CableLinks and WaveTrax
cable management system components on
threaded rods, wall, rails, and equipment
racks.
Slotted holes can be used
for securing Telect’s
Express Off-Ramp
Assembly to a Telect
mounting bracket.***
Screws for Securing Bracket
to Express Off-Ramp**
11.06
8.08
5.24
8.84
1.75
4.00
1.35
3.003.24
Express Off-Ramp**
Express Off-Ramp Brackett**
Express Off-Ramp Cover*
(Optional)