Telefunken TF-LED24S1 User manual

LED TV/ Телевизор цветного изображения c жидкокристаллическим экраномTF-LED24S1Instruction manualРуководство по эксплуатации

Table of contents
2Table of contentsDear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.System setupGeneral setupAudio setupPreference setupGeneral informationTroubleshootingCauses of interferenceAccessoriesSpecificationsTable of contents Before you start Utilization of the product Important safeguardsInstallationWall mountingStand installationConnectionConnectionOutdoor antenna connectionOther connectionsOperationControl elements Front panel Back panelRemote controllerChanging the batteryGeneral operationsTeletext operationsOSD operationChannel settingPicture settingSound settingTimer setting Option settingUSB operationGeneral operations of file playbackDVD playback operationTurn on/off DVDInsert discPlay the discStopRewind/Fast forwardPrevious/Next trackSubtitleAudioRepeatTitle233344455556666778889910101011111111111212121212121212111212121313131314

Before you start
3Before you startIf you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.Utilization of the productImportant safeguards• Before connecting the AC power cord to the DC adapter outlet, make sure that the voltage designation of the DC adapter corresponds to the local electrical supply.• Accessories include a DC adaptor marked with the TV model number. Do not use other adaptors with this unit.• Please unplug the power cord from the AC outlet and contact a service center for repair if following occurs: any obvious abnormality appears in the unit, such as smoky, peculiar smell or strange sound; liquid has been spilled or other objects have fallen into the unit; no picture or sound; cover or panel is broken; although you have operated the unit following the operating instructions, it still cannot work normally.• This unit can be connected to a power supply outlet without the third ground contact as well as with a ground contact.• Always disconnect the power cord and antenna during a storm.• Do not fix the power cord with a metal nail.• Unplug the power cord from the AC outlet; also unplug the signal cables from the input ports when the unit is unused for long periods of time.• When unplugging the plug, always hold the wide slot, do not touch the metal part, and do not destroy, refit, twist, pull or roast the power cord.• Please contact the service center immediately if you found that the core is showed in the air or has been broken.• Please replace the AC outlet if the metal bolt cannot be inserted into the power socket completely or it cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fires would happen.• Never touch the antenna lie or power plug if it stars to thunder.• Do not touch the power plug with wet hands.• Do not use any non-rated power socket with numerous devices jointed on one power socket or cable device. The wire of non-designated capacity may cause the fire due to the generation of heat.• All instructions must be read and understood well before you operate the unit. Heed all warnings and follow all instructions.• Please use the accessories provided by the manufacturer. Using inadequate accessories may result in accidents.• Please adjust the product through the panel buttons or the remote controller, do not remove the cover or attempt to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself to avoid the electric shock.• Over-press the panel may destroy the product.• Do not place the product on an unstable cart, stand surface, tripod, bracket, or table. The product may fall, causing serious accidents

Before you start
4Before you startInstallationWall mountingFor wall mounting the back panel of this unit is equipped with 4 screw holes. A wall-mount bracket should be used for wall mounting (the bracket is not included and should be acquired separately). Manufacturer is not responsible for improper mounting resulting in damage of the unit.Stand installationPlace the LED TV on a solid flat surface. Use soft material to place over the front screen to avoid any damage. Then put the slits of the stand onto the fixing elements in the lower part of the unit until a click and fix the two parts by screws as shown below:as well as the damage to the product. • Please place the product on a flat surface in a well-ventilated location. Keep it away from the burning-light, direct sunlight, vibration, high-temperature and humidity.• Do not place any vase, potted plant, cup, medicine and any container with water on this product. If the liquid is spilt, it may cause the fire, electric shock or breakdown.• Do not install it at the place on the strong magnetic field or current field. It may cause break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.• Fasten the wheel of the product or shelf with wheels when installing this product. If it moves or is tipped over, it may be damaged.• Do not place any fire source such as candlelight close to this product or place it on this product. If it is tipped over or fallen down, it may cause damage or fire.• Do not place the unit into closed space of TV for better ventilation; it can reduce the product lifetime. Keep a space at least 10 cm at above, left and right of the TV.• Please place all the signal cords behind of rear panel.• Do not overexert or touch the panel when you convey the product. Do not transfer the LCD TV up or down display direction.• Do not transport it with the power cord connected. If you move this product with the power cord or the connection cable connected, the damaged power cord, connection cable or connection terminal may cause the fire, the electric shock or breakdown.• 2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip over the device, it can be damaged.• The temperature of the product’s body becomes a little higher after a long period use. This phenomenon indicates that heat exchange in normal working mode, thus please do not let children or anyone who is sensitive of temperature to touch.All images provided herein are schematic drawings and may differ from of real objects.

Operation
5OperationConnectionOutdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input terminal on the rear of the cabinet.Other connections• Connect a TV or CATV antenna to the antenna jack.• Connect a video source to the Composite video input jack with RCA cable.• Connect an audio source to the proper Audio input jacks (left and right).• Connect PC audio input to PC main unit with related audio cable in PC mode.• When using the unit as a computer screen, connect the PC to the PC jack of the unit by the relevant cable.• If the video source has a HDMI output jack, you can connect the signal to the unit by HDMI cable (not included).• Component input is intended for receiving component video signal if connected to the component output of external signal source. To receive audio signal for component video, please use Left and Right audio inputs of this unit.• Connect an external device (e.g., VCR-/DVD-recorder) to the proper Audio/Video output jacks of this unit with AV RCA cable.• Connect your headphones or earphones (not included) to the headphone socket of this unit. When headphones are connected, the sound output through the built-in speakers of this unit is mute.75 Ohm co-axis cableTVRF antenna jackAntenna cable connector
PC AUDIO
IN
VGA INHDMI IN
YPbPr IN
Y Pb Pr
ANTENNAIN
USB
VIDEO IN
VIDEO/YPbPrAUDIO IN

Operation
6OperationFront panel121. IR sensor2. Power indicator Back panel1. USB port2. RF antenna jack3. Audio input R/L4. Video input5. Earphone jack6. HDMI input7. VGA input8. Video out9. Component video input (YPbPr) 10. PC audio input11. VOL +/- buttons12. CH +/- buttons13. MENU button14. SOURCE button15. POWER button567891234
VIDEO IN
VIDEO/YPbPr AUDIO IN
ANTENNA IN
USB
VIDEO IN
VIDEO/YPbPrAUDIO IN
ANTENNA IN
USB
1112131415
PC AUDIO IN
VGA IN
HDMI IN
10Video out

Operation
7OperationRemote controller (RC)1234567891011121314151617181920212223242526272829303132331. POWER button2. Number buttons3. button4. SLEEP button5. FREEZE button6. I-II button7. REC button8. VOL+/VOL- buttons9. SOURCE button10. EXIT button 11. OK button12. Cursor (UP/DOWN/LEFT/RIGHT) buttons 13. P.MODE button14. S.MODE button15. FAV -/+ buttons16. FAV button17. /INDEX and /SIZE buttons18. button19. button20. MUTE button21. --/- button22. P.SIZE button23. INFO button24. PVR LIST button25. SHIFT button26. CH+/CH- buttons27. MENU button28. SUBTITLE button29. GUIDE button30. TEXT button31. /REVEAL and /HOLD buttons32. DVT/RADIO button33. REPEAT buttonChanging the battery1. Remove the battery compartment cover on the back of the RC.2. Insert two AAA batteries into the battery compartment making sure that the correct polarity is observed.3. Install the cover back.• The RC should be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.• Take the battery out of the RC if it is not used for a long time.• Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC.• Do not expose the RC to shock, liquids, and do not place it in an area with high humidity.

Operation
8OperationGeneral operations• Press POWER button on the unit or on the RC to switch on the power, the indication light will be in green color. Press POWER button again to switch off the power, and the light will be in red color.• Press VOL- button repeatedly to decrease the volume; press VOL+ button repeatedly to increase the volume.• Press SLEEP button repeatedly to set the sleep time (from 10 to 240 min).• Press button on the RC to select from the present channel and the previously displayed channel.• Press MUTE button to cut off sound, press this button again or adjust volume to resume sound.• Select the TV function mode. Press CH-/CH+ buttons to select previous or next channels; or press number buttons and [-/--] button to enter a channel number directly.• Press P.MODE button repeatedly to cycle through the available video picture modes from the following types: User => Dynamic => Standard => Mild.• Press S.MODE button repeatedly to cycle through the available sound modes from the following types: Music => Movie => Sports => User => Standart.• Press INFO button to display the preset TV channel play information.• Press FREEZE/ button to freeze the picture on or off.• Press FAV button to show the favourite channel list. Press FAV+/FAV- buttons to select next or previous favorite channel.Signal sourcesPress SOURCE button, then press DOWN/UP cursor buttons on the RC or CH+/CH- buttons on the panel to select a source from available source list: TV - AV - SCART - YPBPR - HDMI - PC - Media. Press ENTER button on the RC or MENU button on the panel to confirm.TELETEXT operations (option)• Select the TV source mode. Then press CH-/CH+ buttons to select TV channel in order to pick up the picture signal of Teletext.• Press CH-/CH+ buttons to select the previous page or the next page.• Teletext button functions are as follows:ON/OFF: Press TEXT button to enter into TEXT mode. Press this button again to return to the channel you are watching.HOLD: Press this button to stop the move to the next page. Press this button again to cancel operation.INDEX: Press this button to go to the index page.SIZE: Press this button to enlarge the text shown on the teletext screen, and one half of page could be shown. Press this button again to view the second half of this page. Press this button third time to normal size text page view.REVEAL: Press this button to reveal the cancelled information. Press this button again to cancel the information.RED/GREEN/YELLOW/CYAN buttons: Press these 4 color buttons to Delete/Rename/Move/Skip the channels in the list in teletext mode.OSD operation1. Press MENU button to enter the setting menu displayed on the screen.2. Press LEFT/RIGHT cursor buttons on the RC or VOL+/- buttons on the panel to select setting page.3. Press DOWN cursor button or ENTER button on the RC or CH+ button on the panel to go to the parameter list.4. Press UP/DOWN cursor buttons on the RC or CH+/- buttons on the panel to select a parameter to adjust.5. Press cursor buttons on the RC or VOL+/- or CH+/- buttons on the panel to adjust the selected parameter.6. Press EXIT button to quit the menu.

Operation
9Operation Some menu items may be in grey color, in this case they are not adjustable. Pictures of OSD menu are for reference only; they may differ from the real screens.Channel setting (only for TV source)CHANNELAuto tuningATV Manual tuningProgramme editMoveMenuEnterExit• Auto tuning: press ENTER button to start automatic search of available channels. To stop the process press MENU or EXIT button.• ATV Manual tuning: Press ENTER button to enter into manual tuning menu:Current Channel: select channel number.Search: press LEFT/RIGHT buttons; the unit will search for next available channel downward or upward and save it under the current number.• Program Edit: this item allows you to sort TV programs according to your preferences. Enter into program edit menu:Delete: Select the channel you want to delete. Press red button to delete the channel.Rename: Highlight the needed channel. Press green button; then press UP/DOWN buttons to select a symbol. Press LEFT/RIGHT buttons to select the next symbol. Press ENTER button to confirm.Move: Highlight the needed channel. Press yellow button; select the position to put the channel into. Press yellow button to confirm.Skip: Highlight the needed channel. Press blue button; now this channel will be skipped when you select previous/next channels.Picture settingPICTUREPicture modeContrastBrightnessColorTintSharpnessColor temperatureNoise reductionMoveMenuEnterExit• Picture Mode: Dynamic/Standard/Mild/ User.• Contrast, Brightness, Color, Tint (adjust the tone of color when your system is in NTSC), • Sharpness: Increase the value to sharpen the edges in the image.• Colour Temperature: Cold/Normal/Warm.• Noise Reduction: Digital noise reduction effect for reducing the video noise level: Off/Low/Middle/High.Sound settingSOUNDSound modeTrebleBassBalanceAuto volumeMoveMenuEnterExit• Sound mode: Standard/Music/Movie/Sports/User.• Treble: adjust treble frequency (only in User sound mode).• Bass: adjust bass frequency (only in User sound mode).• Balance: adjust balance between left and right speaker.• Auto volume: set the auto volume correction on/off. It will level out the sound volume when sudden changes in volume occur during commercial breaks or channel change.

Operation
10Operation10Timer settingTIMESleep timerAuto sleepOSD timerMoveMenuOKExit• Sleep timer: select the period until automatic switch-off of the unit (10 - 240 min).• Auto sleep: select the period of time after which the unit will automatically switch off if no operation is done.• OSD timer: select the period of time after which the OSD will be hidden.Option settingOPTIONOSD languageAspect ratioBlue screenKey lockResetSoftware upgrade (USB)MoveMenuOKExit• OSD Language: select the language of the OSD menu.• TT Language: select teletext language.• Aspect ratio: 4:3/16:9/Zoom1/Zoom2. The set of available aspects can vary depending on the current signal source.• Blue screen: set on or off blue screen activation when no signal.• Key lock: select ON to lock all buttons on the panel. Set OFF to unlock the buttons.• Reset: reset the parameters to initial factory settings. • Software upgrade: this option is intended for using by qualified technicians only.USB operationGeneral playback information• Insert a USB into the USB jack. Select Media source and press ENTER button. The screen will show a USB playback window, in which you can select Music, Photo, Movie and Text contents to play by pressing LEFT/RIGHT cursor buttons and ENTER button.• USB file systems supported: FAT16, FAT32, NTFS. 2.0 USB version is supported; maximum capacity 400 Gb. For correct and satisfactory operation, licensed USB devices of famous brands should be used with this unit. Avoid using USB devices of unknown brands. Playback of some file formates cannot be supported.• This unit supports playback of video files with AVI, MP4, TS/TRP, MKV, MOV, DAT, VOB, RM/RMVB extension, with video codecs WMV9, DIVX, H263, MPEG-4, MPEGII, RV8/9/10 and audio codecs WMA, MP3, AAC, MP 2, PCM. Video image resolution should not be more than 576x720. The above list of extensions and codecs is for information only and is not a guarantee that all files having the above extensions and codecs sohuld be read by this unit.• Some AVI files cannot be played due to their parameters and recording conditions. Video files more than 2 Gb having AVI extension can be played partially. According to the USB 1.1/2.0 Standard, usage of a USB device with power current consumption exceeding 500 mA is not recommended without supplementary power supply. Failure to use supplementary power for connected USB drives with power consumption exceeding this value as well as defective USB drives may cause mechanical or thermal changes of elements of this unit as well as failure of internal elements of the USB port. Such damages are not warrantee cases.Warning: usage of external USB drives containing BIN files in the root directory may cause malfunction of the unit or damage to the software.