Telefunken TF-LED32S32T2 User manual

Table of contents
3LED TV/ Телевизор цветного изображения c жидкокристаллическим экраномTF-LED32S32T2Instruction manualРуководство по эксплуатации

Table of contents
2Table of contentsDear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.Table of contents Before you start Utilization of the product Important safeguardsInstallationBase installationWall mountingConnectionOutdoor antenna connectionOther connectionsOperationControl elements Front panel Back panelRemote controllerChanging the batteryGeneral operations Signal sourcesTeletext operationsOSD operationPicture menuSound menuChannel menuLock System menuSetup menuUSB operationGeneral playback informationOperations of file playback Time Shift function CI InformationGeneral informationTroubleshootingCauses of interferenceAccessoriesSpecifications2333444555666677888991010111112121213141414141515

Before you start
3Before you startIf you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.Utilization of the productImportant safeguards•Before connecting the power cord tothe LED TV, make sure that the voltage designation corresponds to the local electrical supply.•Please unplug the power cord from theoutlet and contact a service center for repair if following occurs: any obvious abnormality appears in the unit, such as smoke, peculiar smell or strange sound; liquid has been spilled or other objects have fallen into the unit; no picture or sound; cover or panel is broken; although you have operated the unit following the operating instructions, it still cannot work normally.•This unit can be connected to a powersupply outlet without the third ground contact as well as with a ground contact.•Always disconnect the power cord andantenna during a thunderstorm.•Do not fix the power cord with a metal nail.•Unplug the power cord from the AC outlet;also unplug the signal cables from the input ports when the unit is unused for long periods of time.•When unplugging the plug, always hold thewide slot, do not touch the metal part, and do not destroy, twist, pull or heat the power cord.•Please contact the service centerimmediately if you found that the cable core is bare or has been broken.•Please replace the AC outlet if the metalplug cannot be inserted into the power socket completely or it cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fires could happen.•Never touch the antenna or power plugduring a thunderstorm.•Do not touch the power plug with wethands.•Do not use any non-rated power socketwith numerous devices plugged into it. The wire of non-designated capacity may cause fire due to heat generation.•All instructions must be read andunderstood well before you operate the unit. Heed all warnings and follow all instructions.•Please use the accessories providedby the manufacturer. Using inadequate accessories may result in accidents.•Please adjust the product through thepanel buttons or the remote controller, do not remove the cover or attempt to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself to avoid the electric shock.•Excessive pressure on the panel maydamage the unit.•Do not place the product on an unstablecart, stand surface, tripod, bracket, or table. The product may fall, causing serious accidents as well as damage to the product. •Please place the product on a flat surfacein a well-ventilated location. Keep it away from open fire, direct sunlight, vibration, high temperature and humidity.•Do not place any vases, potted plants,

Before you start
44Before you startcups, medicines or any other liquid containing objects on the unit. Spillages may cause fire, electric shock or breakdown.•Do not install the unit in locations witha strong magnetic or current field as it may cause malfunction. Picture deterioration due to electromagnetic radiation in this environment is also possible.•Do not place any fire source such ascandles close or on this product. If tipped over or fallen down, it may cause damage or fire.•Do not place the unit into closed spaceof TV for better ventilation; it can reduce the product lifetime. Keep a space at least 10 cm at above, left, and right of the TV.•Please place all the signal cords behindthe rear panel.•Do not overexert or touch the panel whencarrying the product. Do not transport the LED TV with the display faced up or down.•Do not transport the unit with the powercord or the connection cable connected as it may damage the power cord, connection cable or connection terminal which may cause fire, electric shock or breakdown.•Make sure that 2 persons or more carrythe device heavier than 18 kg. Dropping or tipping over the device may damage it.•The temperature of the product’s bodybecomes a little higher after a long period of use. This indicates that heat exchange is in normal working mode, thus please do not let children or anyone who is sensitive to temperature touch the unit.All images provided herein are schematic drawings of real objects and may differ from their real life images.InstallationBase instalationCover a flat stable surface with a soft cloth. Place the TV unit facedown on the cloth. Align the holes in the stand with the fixing pins in the base support. Fasten with 4 PWB4*12 screws.Next put the assembled stand on the lower part of the back panel of the TV, matching the holes. Fix with 4 BB4*12 screws.Wall mountingFor wall mounting the back panel of this unit is equipped with 4 screw holes (4 mm diameter, 100 mm vertical spread distance x 200 mm horizontal spread distance). A VESA wall-mount bracket should be used for wall mounting (the bracket is not included and should be acquired separately). Manufacturer is not responsible for improper mounting resulting in damage of the unit.
WARNING
In order to avoid damage, make sure
to secure the unit on the wall
according to the wall mounting
instruction.

Before you start
55Before you startConnectionOutdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input terminal on the rear of the unit casing.Other connections•Connect the audio sources (IncludingDVD, VCDR, CAMCORDER and others) to the proper Audio input jacks ‘L’ and ‘R’.•Connect the video source to theComposite video jack by RCA cable.•Component input YPbPr is intended toreceive component video signal from the external device. Mini YPbPr cable is required (included), for audio use Left and Right audio inputs.•Connect the power cord to the powersocket of this unit.•When using the LED as a computerscreen, connect the PC to the VGA jack from the monitor using the VGA cable (not included).•This unit has PC audio in jack. Connectthis jack to PC main unit with related audio cable in PC mode and adjust the volume to what you want.•If the video source has a HDMI outputjack, you can connect the signal to the monitor by the HDMI cable (not included).•Coaxial output is intended for transmittingmulti-channel sound to an external decoder (e.g. in 5.1-CH format). Coaxial cable should be used for connection.•Connect your headphones or earphones(not included) to the headphone socket of this unit. When earphones are connected, the sound output through the built-in speakers of this unit is mute.•CI (PCMCIA) slot is used for CI modulesthat are obtained from your digital TV provider.75 Ohm co-axis cableTVRF antenna jackAntenna cable connector

Operation
66OperationFront panelBack panelControl elements1. IR sensor/Power indicator2. INPUT button3. MENU button4. CH+/CH- buttons5. VOL+/VOL- buttons6. POWER/STANDBY button7. Power switch8. PC VGA & audio inputs9. RCA video input10. Stereo audio inputs11. Satellite input12. Antenna/cable input13. HDMI1 input14. HDMI2 input15. HDMI3 input16. Coaxial output17.AV18. YPbPr input19. CI (PCMCIA) slot20. USB port21. Earphone output1
AV
23456789101112131415161718202119

Operation
77OperationRemote controller (RC)1. STANDBY(POWER): Standby turn on and off.2. INPUT: Select the signal input.3. NICAM: Select NICAM/A2 input or output.4. ASPECT: Screen aspect ratio selection.5. P.MODE: Select a picture mode.6. S.MODE: Select a sound mode.7. Numerical buttons: Use to select channel.8. --/-: Use to select number of digits in a channel.9. RECALL: Switch to previously watched channel.10. FAV: Access the favorites menu.11. FREEZE: Freeze the picture.12. TV/RADIO: Switch between TV and radio modes.13. SLEEP: Set the sleep timer of the TV.14. EPG: Access the electronic program guide.15. UP/DOWN/LEFT/RIGHT/ENTER: Used for navigating and selecting menu items.16. MENU: Access the main menu.17. EXIT: Exit any menu or screen.18. VOL+/-: Increase/decrease sound volume.19. CH+/-: Circle up/down channels.20. DISPLAY: Show signal and channel info.21. MUTE: Mute the sound.22. HOLD/: Hold the current display. Playback/pause or start a Timeshift recording.23. REVEAL/: Reveal the hidden information in Teletext. Fast Rewind.24. SIZE/: Change screen size. Fast Forward25. INDEX/: DIsplay the index page in Teletext. Stop playback/recording.26. : previous file.27. S.PAGE/: Enter the subpage in Teletext. next file.28. TTX: Turn Teletext on/off.29. T.SHIFT: Start a Timeshift recording.30. AUDIO: DTV/USB mode: select a backgroung sound (if available).ATV: select a sound mode.Other sources: select the left/right channel.31. SUBTITLE: Show/hide subtitles, if available.32. AUTO/REC: Auto configuration in PC mode/Start recording in DTV mode.33. PVR: Access the PVR setting menu.Color buttons: use for context operations.INPUT
PPVVRR
MUTE

Operation
88OperationChanging the battery1.Remove the battery compartment coveron the back of the RC.2.Insert two AAA batteries into the batterycompartment making sure that the correct polarity is observed.3.Put the cover back.•The RC should be pointed at remotesensor within 8 meters and within 30 degrees at the left or the right side.•Take the battery out of the RC if it is notused for a long time.•Do not mix new and used batteries ordifferent types of batteries. Weak batteries can leak and severely damage the RC.•Do not expose the RC to shock, liquids,and do not place it in an area with high humidity.General operationsPower•Connect the plug of the power cord to thepower supply outlet, the power indicator will flash showing that the unit is in standby mode. To switch on the unit press the power switch on the back of the unit to the ON position. The unit will be in standby mode. Press POWER/ STANDBY on the RC or unit to switch on the unit from standby mode. Press power switch on the back of the unit to OFF position to switch off the power. When the unit is on, press POWER button on the RC to switch the unit to standby.•Do not leave your TV in standby mode fora long period of time; if you are not going to use the unit, disconnect it from power supply.Basic operations•Press VOL- button repeatedly to decreasethe volume; press VOL+ button repeatedly to increase the volume.•Press MUTE to mute sound, press thisbutton again or increase volume to resume sound.•Press RECALL button on the RC to selectfrom the present channel and the previously displayed channel.•Press ASPECT button repeatedly to selecta screen aspect ratio. Available aspects may differ for different signal sources.•Select the TV function mode. PressCH-/CH+ buttons to select previous or next channels; or press number buttons to enter a channel number directly.•Press P.MODE button repeatedly to cyclethrough the available video picture modes.•Press S.MODE button repeatedly to cyclethrough the available sound modes.•Press DISPLAY button to display thepreset TV channel play information.•Press FREEZE button to freeze the pictureon or off.•Press AUDIO button in ATV moderepeatedly to switch between various Nicam sound modes (can be unavailable for some channels). This function is optional.Signal sourcesPress INPUT button, then press DOWN/UP cursor buttons on the RC or CH+/CH- buttons on the panel to select a source from available source list: DTV => ATV => AV => => YPbPr => HDMI 1 => HDMI 2 => HDMI 3 => PC => USB. Press ENTER button on the RC to confirm.Teletext operations (option)Select a TV channel in order to pick up the picture signal of Teletext. Teletext button functions are as follows:TTX: Press this button to enter into TEXT mode. Press the button again to return to the channel you are watching.HOLD: Press this button to stop the move to the next page. Press this button again to cancel operation.INDEX: Press this button to go to the index page.REVEAL: Press this button to reveal the concealed information. Press this button again to conceal the information.Red/Green/Yellow/Blue buttons: Press these 4 color buttons to access directly to corresponding color page displayed at the lower parts of teletext screen.

Operation
99OperationOSD operation1. Press MENU button to enter the settingmenu displayed on the screen.2. Press LEFT/RIGHT cursor buttons on theRC or VOL+/- buttons on the panel to select setting page.3. Press DOWN cursor button or ENTERbutton on the RC or CH+ button on the panel to go to the parameter list.4. Press UP/DOWN cursor buttons on theRC or CH+/- buttons on the panel to select a parameter to adjust.5. Press cursor buttons on the RC or VOL+/-or CH+/- buttons on the panel to adjust the selected parameter.6. Press EXIT button to quit the menu. Some menu items may be in grey color, in this case they are not adjustable. Pictures of OSD menu are for reference only; they may differ from the real screens.Picture MenuPicturePicture modeBrightnessContrastSharpnessSaturationHueColor tempAspect RatioAdvanced SettingsEXIT: ExitMENU: Return Move Adjust•Picture Mode: Press UP and DOWNbuttons to select Picture Mode, then press LEFT/RIGHT button to select one of the picture modes: Standard, Mild, Personal, Dynamic). Press P.MODE to change the picture mode directly.•Brightness/Contrast/Sharpness/Saturation/Hue: Press UP/DOWN to select the option, LEFT/RIGHT to adjust.Brightness: adjust the picture brightness.Contrast: adjust the highlight intensity of the picture.Sharpness: adjust the peak level of detail in the picture.Saturation: adjust color intensity.Hue: use to compensate color in NTSC transmission. •Color Temp: change the overall colortemperature of the picture:Standard: Default vivid color temp.Cool: gentle blue-hued image.Warm: bright red-hued image.•Aspect Ratio: select the screen aspectratio: Auto/Full/4:3/16:9/Zoom1/Zoom2.•Advanced Settings: allows a moredetailed picture setup for advanced users.Sound MenuSoundSound modeTrebleBassBalanceSurround SoundEQ SettingAVLSPDIFAudio DescriptionSound TypeEXIT: ExitMENU: Return Move Adjust•Sound Mode: Press UP and DOWNbuttons to select Sound Mode, then press LEFT/RIGHT button to select one of the sound modes: Standard, Мusic, Personal, Movie). Press S.MODE to change the picture mode directly.•Treble/Bass/Balance: Press UP/DOWN toselect the option, LEFT/RIGHT to adjust.Treble: adjust the treble effect to increase or decrease high-pitched sounds.Bass: adjust the bass effect to increase or decrease low-pitched sounds.Balance: adjust the balance between left and right speakers to adapt to your listening position.

Operation
1010Operation•Surround Sound: toggle the surroundeffect on/off.•EQ Setting: adjust the 7 band equalizer orchoose among presets: Off, Rock, Pop, Jazz, User.•AVL: toggle auto-volume control on/off.Volume automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time when the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program•SPDIF: toggle digital sound via coaxialcable on/off or set it to auto.•Audio Description: view the informationon the current sound channel.•Sound Type: Stereo/Dual I/Dual II/MixedChannel settingChannelTuner TypeAuto ScanManual ScanChannel EditCommon InterfaceSignal InformationCICAM Profile EditEXIT: ExitMENU: Return Move Adjust•Tuner Type: Antenna/Cable.•Auto Scan: select this option to auto scanfor available channels.Country: select your country.Mode: select the scan mode: DTV+ATV, DTV, ATV.Scan Type: select scan type: Advanced/Quick/Full.Network ID: Auto/Manual enter.Frequency: Auto/Manual enter.Symbol Rate: Auto/Manual enter.Start: start the auto search. Digital channels will be searched first, then analog channels. Make sure you select either Antenna or Cable as your tuner type.•Manual Scan: select this option to scanfor available channels manually.Digital Manual Scan: manually search for digital channels. If you select Antenna as your Tuner Type simply select the channel number and press Start to initiate scanning. If your Tuner Type is Cable then following options become available:Network ID: Auto/Manual enter.Frequency: Auto/Manual enter.Symbol Rate: Auto/Manual enter.Modulation: Auto/16QAM/32QAM/64QAM/128QAM/256QAM.Start: start the manual search.Analog Manual Scan: manually search for analog channels. Analog Scan: select scanning frequency.Color System: Auto/PAL/SECAM.Sound System: Auto/DK/BG/I/L.Modulation: Auto/16QAM/32QAM/64QAM/128QAM/256QAM.AFC: automatic fine tuning on/off.Start: start the manual search.•Channel Edit: enter the channel editingmenu. RED, GREEN and CYAN (blue) buttons are used as shortcuts. Select the channel you want to edit with the UP/DOWN buttons and then press:RED button to delete the channel.GREEN button to skip the channel when browsing with CH+/- buttons.BLUE button to make the channel movable in the list with cursor buttons.•Common Interface: select this optionto enter the common interface submenu. Only available when a CI card inserted in the PCMCIA slot in DTV mode.•Signal Information: view the detailedinformation about the current signal. Only available in DTV mode.•CICAM Profile Edit: choose to edit yourCICAM profile.

Operation
1111OperationLock System menuLock SystemEnter Password EnableChannel LocksParental RatingLock KeypadNew PasswordClear LockEXIT: ExitMENU: Return Move Adjust•Enter Password: to access this sub-menuyou must first enter the system password. Default password is 0000.•Enable: enable/disable the the locksystem. Channel locks, Parental Rating and Lock Keypad option are available when the Lock System is enabled.•Channel Locks: access the channel lockssub-menu.•Parental Rating: access the parentalratings sub-menu. This feature can prevent children watching adult’s TV programmes, according to the rating limit set. This function appearance according the information from broadcasting station. Therefore if the signal has incorrect information, this function does not operate.•Lock Keypad: on/off. Lock the buttons onthe TV to prevent from being pushed by young children or other unexpected usage.•New Password: enter a 4-digit systempassword. If you forget it, contact a service center.•Clear Lock: select this option to clear alllocks.Setup menuSetupOSD LanguageAudio LanguagesSubtitleTeletextBlue ScreenMode SettingTime SettingsPVR SettingsFirst Time SetupResetEXIT: ExitMENU: Return Move Adjust•OSD Language: select the language ofthe on-screen display menu.•Audio Languages: select primary andsecondary audio languages.•Subtitle: toggle subtitles on/off and selecttheir language.•Teletext: adjust teletext settings. Onlyavailable in DTV and ATV modes.•Blue Screen: toggle Blue screen on/off.•Mode Setting: select the Home mode orthe Store mode.•Time Settings: access the time & datesetup sub-menu. •PVR Settings: this option is intended foradjusting the PVR (recording) settins. Requires a USB flash drive.•First Time Setup: initiate the first-timesetup.•Reset: go back to factory default settings.•Software Update (USB): update the TVsoftware via a USB device. Must be performed by a specialist.

Operation
1212OperationUSB operationGeneral playback information•Insert a USB drive into the USB port.Select USB source and press ENTER button. The screen will show a USB playback window, in which you can select Music, Photo, Movie and Text contents to play by pressing LEFT/RIGHT cursor buttons and ENTER button.•USB file systems supported: FAT16,FAT32. 2.0 USB version is supported; maximum capacity 1 TB. For correct and satisfactory operation, licensed USB devices of well-known brands should be used. Avoid using USB devices of unknown brands. Playback of some file formats cannot be supported.•This unit supports playback of video files
with AVI, MKV, MP4, MPG, DAT, VOB, TS, FLV extensions, with video codecs DIVX, H264, MPEG-4, MPEGII, XVID and audio codecs WMA, MP3.
The above list of extensions and codecs is for information only and is not a guarantee that all files having the above extensions and codecs should be read by this unit.•Some AVI files cannot be played due totheir parameters and recording conditions. Video files with AVI extension exceeding 2 GB in size may be played partially.According to the USB 1.1/2.0 Standard, usage of a USB device with power current consumption exceeding 500 mA is not recommended without supplementary power supply. Failure to use supplementary power for connected USB drives with power consumption exceeding this value as well as defective USB drives may cause mechanical or thermal changes of elements of this unit as well as failure of internal elements of the USB port. Such damages are not warranty cases.Warning: usage of external USB drives containing BIN files in the root directory may cause malfunction of the unit or damage to the software.Operations of file playback•Insert a USB into the USB port. Pressthe INPUT button or select USB source and press ENTER button on the RC or VOL+/VOL- button on the unit. The screen will show a USB playback window, in which you can select Music, Photo, Movie and Text contents to play by pressing LEFT/RIGHT cursor buttons and ENTER button.•In the content menu, press cursor buttonsto select folder, press ENTER button or button to enter it, then press cursor buttons to select the file you want to watch or to listen to. When highlighting the file, the file information will appear on the right (not available for text files) and picture will be previewed in the center (not available for music and text files). Press ENTER button or button to play the selected file.•While playback, press ENTER button; thebottom of the screen will show playback menu in which you can select an operation by LEFT/RIGHT cursor buttons or perform this operation by pressing ENTER button.•While playback, press button to pauseor resume playback. Press button to stop playback.•When playing music files you can press/ buttons to fast reverse or forward. You can press / buttons to select the desired files manually in normal condition.•When playing photo files, you can press/ buttons to page up or page down the file. Press LEFT/RIGHT cursor buttons to rotate the image. •Press EXIT button to stop playback andreturn to the previous menu screen. corner, the list of the current available channels on the left, and the name of each programme starting in scheduled time periods on the right. Select the channel by pressing UP/DOWN and the programme by pressing LEFT/RIGHT.

General information
1313General informationPVR/Time Shift functionInsert a USB drive, the system will automatically create a folder to store the files recorded. Recording begins when REC button is pressed, and it records all the time until button is pressed or the memory is full. During the recording, press UP/DOWN cursor buttons to zoom in/out the record menu. Please note the following about PVR: •USB storage device must have thecapacity of at least 512 MB and support the USB 2.0 standard. Some non-standard storage devices may not be supported•Try formatting the inserted storage devicewhen you have trouble recording.•Do not disconnect the device while theformatting is in progress. When you format the device, all data on it is deleted. It may be advisable to back up your files before formatting.•If the USB storage device has severalpartitions, the PVR system can record the data on any one of them.Time shift is a feature enabling you to record an air program while you are away. Press TIMESHIFT/ button to activate Time Shift while recording. Press UP/DOWN cursor buttons to zoom in/out the Time shift menu. You can operate referring to Time Shift menu.CI information (only in DTV mode): This function enables you to watch some encrypted services (pay services). Please insert a CI card into the PCMCIA slot according to the arrow on the CI card.•The function can only be availablewhen CI card is present.•It is possible for you to change CI(Common Interface) menu screen and service by consulting your dealer.•Please do not insert or pull out the CI cardwhen power on. During initialization of the CI card, please don’t operate the TV.•Do not insert or pull out the CI cardfrequently so as to avoid any damages of the TV and the CI card.•If there is no picture and/or sound with theCI+ CAM module inserted, please contact the customer support of the service provider.

General information
14General informationTroubleshootingBelow is a table describing simple measures that can help you eliminate most problems likely to emerge when this unit is in use. If below measures do not help, turn to a service center or to the nearest dealer.SymptomCauseSolutionNo picture, no sound, and no indicator lightThe power cord is not plugged in.Contrast, brightness, color and volume are all in the minimum value or TV is in mute mode.Plug the power cord in.Alter the value of contrast, brightness, color and volume.Picture and sound with abnormityContrast and color are set improperly.Color system is set improperly.Sound system is set improperly.Set the value of Contrast and color properly.Set the sound system properly.The picture in VGA mode is abnormalThe PC settings may be improper.Check and set the resolution parameters of your PC.Picture is spotted or with snowSignal source is low-grade or the signal is in a lower quality.Use the qualified signal cord.Blue backgroundNo video signal or the signal cord is improperly/not connected.Connect the signal cord properly.No soundNo audio signal or the signal cord is improperly/not connected.Connect the audio signal cord properly.Set the sound system properly.The RC does not workBatteries are improperly installed or exhausted.Make sure the positive and the negative polarities are correct.Reattach the battery lid.Replace the batteries.Causes of interferenceIncorporated in your TV receiver are the most up-to-date devices to eliminate interference. Local radiation however, can create disturbances, which visibly affect your picture. Proper installations, a good aerial are your best safeguards against these disturbances.•RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting orreceiving short-wave radio equipment.•DIATHERMY: Herringbone pattern and partial picture loss can result from the operation ofdiathermy equipment from a nearby doctor’s surgery or hospital.•SNOW: Weak TV signals from long distant stations result in an instead picture and give theeffect of falling snow. An antenna adjustment or antenna amplifier may be needed.•GHOST: Multiple image, caused by TV signals reflected back from surrounding buildings,hills, aircraft, etc. is minimized by correct aerial positioning.•CAR IGNITION: Nearby cars and electrical motors can cause small streaks across the pictureor make the picture roll.

General information
15General informationAccessories1. LED TV1 pc2. Remote controller1 pc3. Batteries2 pcs 4. Stand1 pc5. Base support1 pcSpecifications31.5” (80 cm)1366 x 76816:98 msvertical 178°; horizontal 178°PAL/SECAMB/G, DK, I, L2 x 5 W+++DVB-T2/DVB-T/DVB-C++++ (x3)++++
Size (diagonal) Resolution Aspect ratio Response time View angle Color system Sound system NICAM Stereo Component in (mini) AV RCA in PC audio input Digital signal reception PVR/TImeshift function PCMCIA (CI and CI+ support) VGA in HDMI in Digital coaxial output Headphone jack Russian and English OSD Progressive scan Digital comb filter Sleep timer USB movie, audio and photo support Quantity of channels Teletext Electric shock protection class Nominal voltage range: Unit dimensions: without stand with stand Net weight 3D++99 ATV/1200 DTV 1000 pagesII~100–240 V; 50/60 Hz; 737 x 82 x 438 mm 737 x 190 x 477 mm 6.0 kg The LED panel is a high technology product with many thin film transistors that can give you a fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green, red, black or white, please note that this does not affect the performance of your LED TV.Warning: Specifications may be subject to change without notice for improvement.
6. Screw8 pcs7. Mini YPbPr cable1 pc8. Consumer information1 pc9. Warranty card1 pc10. Instruction manual1 pc
Operating conditions
Ambient temperature
Relative humidity
Atmospheric pressure
from 5 to 35 oC
from 45 to 75%
from 86 to 106 kPa
(650-800 mm Hg)

General information
1614General information

Содержание
1715СодержаниеУважаемый покупатель!Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-пасно пользоваться приобретенным устройством, рекомендуется тщательно изучить настоящее руководство перед подключением и эксплуатацией изделия. Сохраняйте руководство для использования в будущем.Содержание Перед началом эксплуатации Утилизация изделияМеры предосторожностиУстановкаУстановка на подставкуКрепление на стенуПодключениеПодключение внешней антенныПрочие подключенияУправление устройствомЭлементы управления Передняя панель Задняя панельПульт дистанционного управленияУстановка батареекОбщие операции Источники сигналаОперации с телетекстомЭкранное менюМеню “Изображение”Меню “Звук”Меню “Канал”Меню “Блокировка” Меню “Настройка”Операции с USBОбщая информацияВоспроизведение файлов Функция Time Shift Интерфейс CIОбщая информацияРуководство по устранению неисправностейИсточники помехКомплект поставкиТехнические характеристики1718181820202021212122222222232324242425252626272828282829293030303131

Перед началом эксплуатации
2816Перед началом эксплуатацииЕсли вы желаете утилизировать данное изделие, не выбрасывайте его вместе с обычным бытовым мусором. Существует отдельная система сбора использованных электронных изделий в соответствии с законодательством, которая предполагает соответствующее обращение, возврат и переработку.Обращайтесь в органы местного управления за инструкциями по правильной ути-лизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия с соблю-дением обязательных процедур по обработке, утилизации и вторичной переработке и, таким образом, предотвратите потенциальное негативное воздействие на окружа-ющую среду и здоровье людей.Утилизация изделияМеры предосторожности•Перед подсоединением кабеля питанияубедитесь, что напряжение соответствует напряжению электрической сети.•Пожалуйста, извлеките шнур пита-ния из розетки и свяжитесь с сервисной службой в следующих случаях: если в устройстве имеются явные неисправности, например, из него идет дым, чувствуется специфический запах или слышен неха-рактерный звук; если внутрь устройства попала жидкость или посторонние предме-ты; если нет изображения или звука; если поврежден корпус или панель; если Вы пользуетесь устройством согласно инструк-ции, но оно не работает должным образом.•Данное изделие может подключатьсяк розетке питания как без заземляющего третьего контакта, так и с заземляющим третьим контактом.•Во избежание поражения электричес-ким током защищайте шнур питания от возможного нажатия на него или защемле-ния, особенно рядом с разъемами.•Не закрепляйте шнур питания метизами.•Если Вы не пользуетесь устройствомдлительное время или в случае грозы обязательно отключайте шнур питания из розетки, а также отключайте все сигналь-ные кабели от входных разъемов.•При отключении вилки из розетки всег-да держитесь за утолщение на вилке, не касайтесь металлических частей, не тяните за шнур и не ломайте и не перегибайте его, не ремонтируйте, не перекручивайте и не нагревайте.•Немедленно свяжитесь с сервиснымцентром, в случае если имеются какие-либо неисправности шнура питания, в нем оголи-лись жилы или он поврежден.•Замените сетевую розетку, если внее невозможно вставить вилку или вилка плохо закрепляется в розетке. Иначе могут возникнуть неисправности или произойти несчастные случаи или возгорания.•Не прикасайтесь к проводам мокрымируками.•Запрещается использование розетки, вкоторую подключено несколько устройств. Перегрузка такой розетки может привести к пожару.•Место подключения вилки шнурапитания к сети 220 В должно оставаться легкодоступным.•Перед работой с устройством необ-ходимо полностью прочитать и понять все инструкции. Необходимо соблюдать все пре-дупреждения и следовать всем инструкциям,

Перед началом эксплуатации
1917Перед началом эксплуатацииприведенным в настоящем руководстве.• Пожалуйста, используйте только реко-мендованные производителем аксессуары. Использование других аксессуаров может привести к неисправностям.• Пожалуйста, проводите все настройки и регулировки только с помощью кнопок на передней и боковой панелях или на пульте дистанционного управления. Ни в коем случае не снимайте заднюю панель и не пытайтесь самостоятельно проводить техническое обслуживание устройства, так как существует опасность поражения электрическим током, а также возможно возникновение неисправностей.• Не устанавливайте устройство на непрочные или неровные поверхности, тележки, стойки, треноги, кронштейны или столы. Устройство может упасть, в резуль-тате чего могут возникнуть неисправности или произойти несчастные случаи. Исполь-зуйте только те приспособления, которые рекомендованы производителем или продавцом.• Пожалуйста, устанавливайте устройс-тво на горизонтальной поверхности в мес-тах с хорошей вентиляцией. Не допускайте воздействия на устройство вибрации, пря-мого солнечного света, высокой температу-ры, а также попадания пыли и влаги.• Не ставьте на устройство вазы, сосуды с жидкостью. Попадание жидкости внутрь аппарата может привести к пожару или поломке устройства.• Не устанавливайте устройство в зоне магнитных волн. Это может привести к поломке устройства. В зоне электромаг-нитного излучения может наблюдаться искажение изображения.• Не устанавливайте вблизи устройства источники открытого огня, например, свечи. В случае их падения устройство может быть повреждено или может произойти возгора-ние.• Установка телевизора в замкнутое пространство при эксплуатации может сократить срок службы устройства; поэтому необходимо обеспечить минимальную дистанцию между LCD-телевизором и внутренними границами приспособления под аппарат для нормальной вентиляции (минимум по 10 см свободного пространс-тва со всех сторон).• Располагайте кабели позади устройс-тва. Не закрепляйте их метизами, не пере-гибайте, не ремонтируйте и не нагревайте.• При перемещении телевизора не нажи-майте и не касайтесь панели. Не перено-сите телевизор в положении, при котором экран направлен вверх или вниз.• Не перемещайте устройство при подключенном проводе питания или других подключенных проводах. Повреждение про-вода питания, подключенный провод или подключенные устройства могут стать при-чиной пожара, электрошока или поломки.• Если устройство тяжелее 18 кг, его должны перемещать не менее 2 человек. При падении устройство может повредиться.• Слишком сильное нажатие на панель может повредить устройство.• При длительном использовании может немного повыситься температура корпуса устройства. Это явление свидетельствует о теплоотдаче в нормальном рабочем режи-ме. Однако не позволяйте детям и людям с повышенной температурной чувствитель-ностью касаться устройства.Все иллюстрации, приведенные в настоящем руководстве, являются схе-матическими изображениями, которые могут отличаться от реальных объектов.

Перед началом эксплуатации
2018Установка/ПодключениеУстановкаУстановка на подставкуВыберите ровную плоскую горизонталь-ную поверхность, накройте ее мягкой тка-нью и разместите на ней корпус телевизора экраном вниз. Присоедините подставку к основанию таким образом, чтобы отверстия в подставке и в основании совпадали. За-фиксируйте с помощью 4 винтов PWB4*12.Присоедините полученную конструкцию к задней части корпуса так, чтобы отверстия в подставке и корпусе совпали. Скрепите 4 винтами BB4*12.Крепление на стену•Для крепления на стену на заднейпанели телевизора имеются 4 отверстия, расстояние между которыми по вертикали составляет 100 мм, по горизонтали - 200 мм. Для крепления следует использовать настенный кронштейн стандарта VESA (в комплект поставки не входит и приобре-тается отдельно). Производитель не несет ответственности за неправильно выпол-ненный монтаж, повлекший повреждение телевизора.

   
    
  
  .