Telefunken TF-LED32S7T2 User manual

Table of contents
3LED TV/ Телевизор цветного изображения c жидкокристаллическим экраномTF-LED32S7T2Instruction manualРуководство по эксплуатации

Table of contents
2Table of contents Before you start Utilization of the product Important safeguardsInstallationBase installationWall mountingConnectionOutdoor antenna connectionOther connectionsOperationControl elements Front panel Back panelRemote controllerChanging the batteryGeneral operations Signal sourcesTeletext operationsOSD operationPicture settingSound settingChannel settingFeature settingSetup menuUSB operationGeneral playback informationOperations of file playback Electronic programme guide (EPG)General informationTroubleshootingCauses of interferenceAccessoriesSpecificationsTable of contentsDear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.23334445556666778889910101111121212131414141515

Before you start
3Before you startIf you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.Utilization of the productImportant safeguards• Please unplug the power cord from the AC outlet and contact a service center for repair if following occurs: any obvious abnormality appears in the unit, such as smoky, peculiar smell or strange sound; liquid has been spilled or other objects have fallen into the unit; no picture or sound; cover or panel is broken; although you have operated the unit following the operating instructions, it still cannot work normally.• This unit can be connected to a power supply outlet without the third ground contact as well as with a ground contact.• Always disconnect the power cord and antenna during a storm.• Do not fix the power cord with a metal nail.• Unplug the power cord from the AC outlet; also unplug the signal cables from the input ports when the unit is unused for long periods of time.• When unplugging the plug, always hold the wide slot, do not touch the metal part, and do not destroy, twist, pull or roast the power cord.• Please contact the service center immediately if you found that the core is showed in the air or has been broken.• Please replace the AC outlet if the metal bolt cannot be inserted into the power socket completely or it cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fires would happen.• Never touch the antenna lie or power plug if it stars to thunder.• Do not touch the power plug with wet hands.• Do not use any non-rated power socket with numerous devices jointed on one power socket or cable device. The wire of non-designated capacity may cause the fire due to the generation of heat.• All instructions must be read and understood well before you operate the unit. Heed all warnings and follow all instructions.• Please use the accessories provided by the manufacturer. Using inadequate accessories may result in accidents.• Please adjust the product through the panel buttons or the remote controller, do not remove the cover or attempt to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself to avoid the electric shock.• Over-press the panel may destroy the product.• Do not place the product on an unstable cart, stand surface, tripod, bracket, or table. The product may fall, causing serious accidents as well as the damage to the product. • Please place the product on a flat surface in a well-ventilated location. Keep it away from the burning-light, direct sunlight, vibration, high-temperature and humidity.• Do not place any vase, potted plant, cup, medicine and any container with water on this

Before you start
44Before you startproduct. If the liquid is spilt, it may cause the fire, electric shock or breakdown.• Do not install it at the place on the strong magnetic field or current field. It may cause break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.• Fasten the wheel of the product or shelf with wheels when installing this product. If it moves or is tipped over, it may be damaged.• Do not place any fire source such as candlelight close to this product or place it on this product. If it is tipped over or fallen down, it may cause damage or fire.• Do not place the unit into closed space of TV for better ventilation; it can reduce the product lifetime. Keep a space at least 10 cm at above, left, and right of the TV.• Please place all the signal cords behind of rear panel.• Do not overexert or touch the panel when you convey the product. Do not transfer the LED TV up or down display direction.• Do not transport it with the power cord or the connection cable connected. If you move this product with the power cord or the connection cable connected, damaged power cord, connection cable or connection terminal may cause fire, electric shock or breakdown.• 2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip over the device, it may damage it.• The temperature of the product’s body becomes a little higher after a long period use. This phenomenon indicates that heat exchange in normal working mode, thus please do not let children or anyone who is sensitive of temperature to touch.All images provided herein are schematic drawings and may differ from real objects.InstallationBase instalationCover a flat stable surface with a soft cloth. Place the TV unit facedown on the cloth. Align the holes in the stand with the fixing pins in the bottom of the base and fix it with 3 screws. Wall mounting• Unscrew the 4 screws from the stand in the back of the unit. Separate the stand from the cabinet before wall mounting.• For wall mounting the back panel of this unit is equipped with 4 screw holes. A VESA wall-mount bracket should be used for wall mounting (the bracket is not included and should be acquired separately). Manufacturer is not responsible for improper mounting resulting in damage of the unit.Wall or ceiling mounting implements must be durable and sufficient enough to support the weight of the unit.

Before you start
55Before you startConnectionOutdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input terminal on the rear of the cabinet.Other connections• Connect the audio sources (Including DVD, VCDR, CAMCORDER and PC) to the proper Audio input jacks ‘L’ and ‘R’.• Connect the video source to the Composite video jack by RCA cable.• Plug the power cable in the electric outlet, making sure the current voltage is supported.• When using the LED as a computer screen, connect the PC to the VGA jack from the monitor by the relevant cable (not included).• This unit has PC audio in jack. Connect this jack to PC main unit with related audio cable in PC mode and adjust the volume to what you want.• If the video source has a HDMI output jack, you can connect the signal to the monitor by the HDMI cable (not included).• Coaxial output is intended for transmitting multi-channel sound to an external decoder (e.g. in 5.1-CH format). Coaxial cable should be used for connection.• Connect your headphones or earphones (not included) to the headphone socket of this unit. When earphones are connected, the sound output through the built-in speakers of this unit is mute.• PCMCIA slot is used for CI modules that are obtained from your digital TV provider.75 Ohm co-axis cableTVRF antenna jackAntenna cable connector

Operation
66OperationFront panelControl elements 1. VOL+/VOL- buttons 2. CH+/CH- buttons 3. MENU button 4. SOURCE button 5. POWER/STANDBY buttonBack panel1. Power cable2. Earphone output3. HDMI inputs4. Composite RCA input5. Coaxial output6. TVRF antenna jack7. PCMCIA slot 8. VGA input9. PC audio input10. USB port 12345
CI
AC 100-240V
50/60Hz~
HDMI2
HDMI1 HDMI3
COAXIAL
12345678910

Operation
77OperationRemote controller (RC)1234567891011121314151617181920212223242526272829303132333435361. POWER button2. Number buttons3. DTV/ATV button4. P.MODE button5. S.MODE button6. MENU button7. Cursor (UP/DOWN/LEFT/RIGHT) buttons/ENTER button8. EXIT button9. MTS button10. VOL+/VOL- buttons11. FAV/LIST button 12. ASPECT/ button13. GUIDE/ button14. TIMESHIFT/ button15. INDEX/ button16. REVEAL button17. SIZE button18. RED button19. GREEN button20. MUTE button21. button22. SLEEP button23. SOURCE button24. DISPLAY button25. CH+/CH- buttons26. RECLIST button27. REC button28. FREEZE button29. CANCEL/ button30. SUB.PG/ button31. TV/RADIO button32. SUBTITLE button33. TEXT button34. HOLD button35. CYAN button36. YELLOW buttonChanging the battery1. Remove the battery compartment cover on the back of the RC.2. Insert two AAA batteries into the battery compartment making sure that the correct polarity is observed.3. Install the cover back.• The RC should be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.• Take the battery out of the RC if it is not used for a long time.• Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC.• Do not expose the RC to shock, liquids, and do not place it in an area with high humidity.

Operation
88OperationGeneral operations• Press POWER button on the unit or on the RC to switch on the power. Press POWER button again to switch the unit off and go the the stand-by mode. To completely power off the unit unplug the power cable from the outlet.• Press VOL- button repeatedly to decrease the volume; press VOL+ button repeatedly to increase the volume.• Press SLEEP button repeatedly to set the sleep time.• Press ATV/DTV button to switch between analog and digital TV.• Press GUIDE to launch the Electronic Program Guide (EPG) or for a fast reverse in recording (PVR) or Media Player mode.• Press TIMESHIFT to enable the Time Shift function for digital TV or to play in PVR or Media Player mode• Press SUBTITLE to show and set the language of a current DTV channel.• Press REC to begin recording of current playback in PVR mode. Press RECLIST to show the list of recorded files.• Press button on the RC to select from the present channel and the previously displayed channel.• Press ASPECT button repeatedly to select a screen display size from the available list: 4:3/16:9/Zoom1/Zoom2/Panorama. Available aspects may differ for different signal sources.• Press MUTE button to cut off sound, press this button again or adjust volume to resume sound.• Press TV/RADIO button to switch between TV and radio modes when watching channels.• Select the TV function mode. Press CH-/CH+ buttons to select previous or next channels; or press number buttons to enter a channel number directly.• Press P.MODE button repeatedly to cycle through the available video picture modes.• Press S.MODE button repeatedly to cycle through the available sound modes.• Press DISPLAY button to display the preset TV channel play information.• Press FREEZE/ button to freeze the picture on or off.• Press FAV button to show the favourite channel list. Press FAV+/FAV- buttons to select next or previous favorite channel.• Press MTS button in TV mode repeatedly to switch between various Nicam sound modes (can be unavailable for some channels).Signal sourcesPress SOURCE button, then press DOWN/UP cursor buttons on the RC or CH+/CH- buttons on the panel to select a source from available source list: DTV - ATV - AV - HDMI1 -HDMI2 - HDMI3 - PC - MEDIA. Press ENTER button on the RC or MENU button on the panel to confirm. Press EXIT to exit.TELETEXT operations (option)• Select the TV source mode. Then press CH-/CH+ buttons to select TV channel in order to pick up the picture signal of Teletext.• Press CH-/CH+ buttons to select the previous page or the next page.• Teletext button functions are as follows:ON/OFF: Press TEXT button to enter into TEXT mode. Press this button again to return to the channel you are watching.HOLD: Press this button to stop the move to the next page. Press this button again to cancel operation.INDEX: Press this button to go to the index page.SIZE: Press this button to enlarge the text shown on the teletext screen, and one half of page could be shown. Press this button again to view the second half of this page. Press this button third time to normal size text page view.REVEAL: Press this button to reveal the cancelled information. Press this button again to cancel the information.SUB.PG: Press this button to select sub page, and the sub-page symbol will appear in the left top hand corner of the screen. Enter the number of sub page and use numeric buttons in the format 0001 for sub page 1. The teletext

Operation
99Operationwill search for the sub page.CANCEL: When a text page is selected, it may take some time before it becomes available; press this button to return to TV mode. When the required page is found, its number will be displayed at the top of the screen; press this button to return to the teletext mode and browse the page.RED/GREEN/YELLOW/CYAN buttons: Press these 4 color buttons to access directly to corresponding color page displayed at the lower parts of teletext screen.OSD operation1. Press MENU button to enter the setting menu displayed on the screen.2. Press LEFT/RIGHT cursor buttons on the RC or VOL+/- buttons on the panel to select setting page.3. Press DOWN cursor button or ENTER button on the RC or CH+ button on the panel to go to the parameter list.4. Press UP/DOWN cursor buttons on the RC or CH+/- buttons on the panel to select a parameter to adjust.5. Press cursor buttons on the RC or VOL+/- or CH+/- buttons on the panel to adjust the selected parameter.6. Press EXIT button to quit the menu. Some menu items may be in grey color, in this case they are not adjustable. Pictures of OSD menu are for reference only; they may differ from the real screens.Picture settingPicturePicture modeBrightnessContrastSharpnessColourTintColour temperatureAspect ratioNoise reductionMENU: ReturnEXIT: Exit MoveENTER: Enter• Picture Mode: Press UP and DOWN buttons to select Picture Mode, then press LEFT/RIGHT button to select one of the picture modes: Dynamic, Standard, Mild, User). Press P.MODE to change the picture mode directly.• Brightness/Contrast/Sharpness/Colour/Tint: Press UP/DOWN to select the option, LEFT/RIGHT to adjust.Brightness: adjust the picture brightness.Contrast: adjust the highlight intensity of the picture.Sharpness: adjust the peak level of detail in the picture.Colour: adjust color intensity.Tint: use to compensate color in NTSC transmission. • Color Temperature: change the overall color temperature of the picture:Standard: Default vivid color temp.Cool: gentle blue-hued image.Warm: bright red-hued image.• Aspect Ratio: select the screen aspect ratio: Auto/4:3/16:9/Zoom1/Zoom2/Panorama.• Noise Reduction: Digital noise reduction effect for reducing the video noise level: Off/Low/Middle/High.

Operation
1010OperationSound settingSoundSound modeBassTrebleBalanceSurroundAVLSPDIFMENU: ReturnEXIT: Exit MoveENTER: Enter• Sound Mode: Press UP and DOWN buttons to select Sound Mode, then press LEFT/RIGHT button to select one of the sound modes: Standard, Мusic, Movie, Speech, User). Press S.MODE to change the sound mode directly.• Bass/Treble/Balance: Press UP/DOWN to select the option, LEFT/RIGHT to adjust.Bass: adjust the bass effect to increase or decrease low-pitched sounds.Treble: adjust the treble effect to increase or decrease high-pitched sounds.Balance: adjust the balance between left and right speakers to adapt to your listening position.• Surround: toggle the surround sound effect on/off.• AVL: toggle auto-volume control on/off. Volume automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time when the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program• SPDIF: toggle digital sound via coaxial cable on/off.Channel settingChannelChannel ManagementFavorite ManagementCountryTV connectionAuto SearchDTV Manual SearchATV Manual SearchMENU: ReturnEXIT: Exit MoveENTER: Enter• Channel Management: enter the channel editing menu. RED, GREEN, YELLOW and BLUE buttons are used as shortcuts. Select the channel you want to edit with the UP/DOWN buttons and then press:RED button to delete the channel.GREEN button to skip the channel when browsing with CH+/- buttons.YELLOW button to make the channel movable in the list with cursor buttons.BLUE button to select the two channels to be swapped places.• Favorite Management: enter the favorite channel editing menu. RED, GREEN, YELLOW and BLUE buttons are used to mark channels as “Fav1, Fav2, Fav3 and Fav4, respectively.• Country: use UP/DOWN buttons to select your country.• Auto Search: select this option to automatically scan for available channels.ALL: select this option to search for all available digital and analogue channels. You can skip directly to digital scanning or stop the search altogether by pressing EXIT/MENU.DTV: Search for digital channels only.ATV: Search for analogue channels only.• DTV Manual Search: select this option to scan for available digital channels manually.First select channel number by pressing ENTER/RIGHT or input the number directly. The strength and quality of the signal will be displayed at the bottom. Select “Start” and press ENTER to start the current channel

Operation
1111Operationsearch.• ATV Manual Search: select this option to scan for available analogue channels manually.First select channel number by pressing ENTER/RIGHT or input the number directly. Select “Search” and press ENTER to start the current channel search. You can also fine tune the channel frequency for a better reception.Feature settingFeatureLockLanguageClockSleep TimerAuto Power OffHearing ImpairedCI InfoPVR/TimeshiftMENU: ReturnEXIT: Exit MoveENTER: Enter• LockLock Channel: On/Off. A password is required to view channels that are locked.Parental Lock: Off/4-18. Toggle the parental lock and set the age level permission for certain programmes.Change PIN Code: Press ENTER/RIGHT to set a New Password then enter a 4-digit number you want to set twice.• Language: Select a System Language which includes OSD Language, Preferred Subtitle, Preferred Audio, Digital Teletext Language, Analog Teletext Language.• Clock: set the current system time and set the time zone and DST (daylight saving time).• Sleep Timer: select the period (10-240 min) after which the TV will automatically power off.• Auto Power Off: select the period after which the TV will automatically power off.• Hearing impaired: This function allows the use of close captions for people with hearing impairements (where available).• CI Info: select this option to enter the common interface submenu. Only available when a CI card inserted in the PCMCIA slot in DTV mode.• PVR/Timeshift: enter the PVR submenu to setup digital channel recording. More info is listed in the PVR/Timeshift section of this manual.Setup menuSetupOSD TimerAuto SCARTPC SetupBlue ScreenReset TV SettingSoftware UpgradeMENU: ReturnEXIT: Exit MoveENTER: Enter• OSD Timer: 5s/10s/15s/20s/25s/30s/Never. Select the period after which the elements of OSD menu disappear.• Auto SCART: switch to Auto SCART function (if available).• PC SetupAvailable only when PC is selected as a signal source.Auto Adjust: adjust all the parameters automatically.H Position: manually adjust the horizontal position.V Position: manually adjust the vertical position.Phase: manually adjust phase.Clock: manually adjust clock.• Blue Screen: set on or off blue screen activation when there is no TV signal in ATV mode.• Reset TV Setting: reset the parameters to initial factory settings. May require a password and user confirmation.• Software upgrade: this option is intended for using by qualified technicians only.

Operation
1212OperationUSB operationGeneral playback information• Insert a USB into the USB jack. Select Media source and press ENTER button. The screen will show a USB playback window, in which you can select Music, Photo, Movie and eBook contents to play by pressing LEFT/RIGHT cursor buttons and ENTER button.• USB file systems supported: FAT16, FAT32, NTFS. 2.0 USB version is supported; maximum capacity 2 TB (NTFS). For correct and satisfactory operation, licensed USB devices of famous brands should be used with this unit. Avoid using USB devices of unknown brands. Playback of some file formates cannot be supported.• This unit supports playback of video files with ASF, AVI, MKV, MPG extension, with video codecs WMV9, DIVX, H263, MPEG-4, MPEGII, XVID and audio codecs WMA, MP3, DD(AC3). The above list of extensions and codecs is for information only and is not a guarantee that all files having the above extensions and codecs sohuld be read by this unit.• Some AVI files cannot be played due to their parameters and recording conditions. Video files more than 2 GB having AVI extension can be played partially. According to the USB 1.1/2.0 Standard, usage of a USB device with power current consumption exceeding 500 mA is not recommended without supplementary power supply. Failure to use supplementary power for connected USB drives with power consumption exceeding this value as well as defective USB drives may cause mechanical or thermal changes of elements of this unit as well as failure of internal elements of the USB port. Such damages are not warrantee cases.Warning: usage of external USB drives containing BIN files in the root directory may cause malfunction of the unit or damage to the software.Operations of file playback• Press cursor buttons to select Return option and press ENTER button if you want to go back to the previous menu.• In the content menu, press cursor buttons to select folder, press ENTER button or CANCEL/ button to enter it, then press cursor buttons to select the file you want to watch or to listen to. When highlighting the file, the file information will appear on the right (not available for text files) and picture will be previewed in the center (not available for music and text files). Press ENTER button or CAN--CEL/ button to play the selected file.• While playback, press ENTER button; the bottom of the screen will show playback menu in which you can select an operation by LEFT/RIGHT cursor buttons on perform this opera-tion by pressing ENTER button. The operations are as follows:Play or pause playbackAll filesSelect previous fileAll filesSelect next fileAll filesStop plabyack and return to previous menuAll filesSelect repat playback modeAll filesPlay music in background mode when photo or text file is being browsed (you should select music file first)Photo and TextShow playlistAll filesShow file informationAll filesRotate image clockwisePhotoRotate image anti-clockwisePhotoFast backward playbackMusicFast forward playbackMusic

Operation
1313OperationMute the soundMusicSelect time to start playback fromMusicFragment repeat playback. Press OK to select initial point, press OK to select final point of the fregmentMovieSlow playbackMovieStep playbackMovieZoom inMovieZoom outMovieSelect aspect ratioMovie• While playback, press CANCEL/ button to pause or resume playback. Press INDEX/ button to stop playback.• When playing photo, movie and music files, you can press REPEAT button to select the repeat play mode. Press ROOT button to go to the root menu of the storage.• When playing music files you can press / buttons to fast reverse or forward. You can press / buttons to select the desired files manually in normal condition.• When playing photo files, you can press / buttons to page up or page down the file. Press LEFT/RIGHT cursor buttons to rotate the image.Electronic programme guide (EPG)If you know the airing time of the current programme you can access the EPG menu by pressing the EPG button on the RC. The menu displays date and time in the top right corner, the list of the current available channels on the left, and the name of each programme starting in scheduled time periods on the right. Select the channel by pressing UP/DOWN and the programme by pressing LEFT/RIGHT.There are 3 modes of the EPG menu:Daily: shows the daily broadcasting schedule.Weekly: shows the weekly broadcasting schedule.Extended: shows the detailed information for each programme.PVR/Timeshift functionInsert a USB drive, the system will automatically create a folder to store the files recorded. Recording begins when REC button is pressed, and it records all the time until button is pressed or the memory is full. During the recording, press UP/DOWN cursor buttons to zoom in/out the record menu.PVR/Timeshift is a feature enabling you to record an air program while you are away. Press button to activate Time Shift while recording. Press UP/DOWN cursor buttons to zoom in/out the Timeshift menu. You can operate referring to PVR/Timeshift menu on the screen.Record list: Press REC.MENU button to display the record list. Press UP/DOWN cursor buttons to select items, press ENTER button to play. Press RED button to delete a program. Press GREEN button to display the program info. Press INFO button to sort programs. Press EXIT button to quit.CI information (only in DTV mode): This function enables you to watch some encrypted services (pay services). Please insert a CI card into the PCMCIA slot according to the arrow on the CI card. • The function can only be available when CI card is present.• It is possible for you to change CI (Common Interface) menu screen and service by consulting your dealer.• Please do not insert or pull out the CI card when power on. During initialization of the CI card, please don’t operate the TV.• Do not insert or pull out the CI card frequently so as to avoid any damages of the TV and the CI card.• If there is no picture and/or sound with the CI+ CAM module inserted, please contact the customer support of the service provider.

General Information
14TroubleshootingBelow is a table describing simple measures that can help you eliminate most problems likely to emerge when this unit is in use. If below measures do not help, turn to a service center or to the nearest dealer.SymptomCauseSolutionNo picture, no sound, and no indicator lightThe power cord is not plugged in.Contrast, brightness, color and volume are all in the minimum value or TV is in mute mode.Plug the power cord in.Alter the value of contrast, brightness, color and volume.Picture and sound with abnormityContrast and color are set improperly.Color system is set improperly.Sound system is set improperly.Set the value of Contrast and color properly.Set the sound system properly.The picture in VGA mode is abnormalThe PC settings may be improper.Check and set the resolution parameters of your PC.Picture is spotted or with snowSignal source is low-grade or the signal is in a lower quality.Use the qualified signal cord.Blue backgroundNo video signal or the signal cord is improperly/not connected.Connect the signal cord properly.No soundNo audio signal or the signal cord is improperly/not connected.Connect the audio signal cord properly.Set the sound system properly.The RC does not workBatteries are improperly installed or exhausted.Make sure the positive and the negative polarities are correct.Reattach the battery lid.Replace the batteries.Causes of interferenceIncorporated in your TV receiver are the most up-to-date devices to eliminate interference. Local radiation however, can create disturbances, which visibly affect your picture. Proper installations, a good aerial are your best safeguards against these disturbances.• RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting or receiving short-wave radio equipment.• DIATHERMY: Herringbone pattern and partial picture loss can result from the operation of diathermy equipment from a nearby doctor’s surgery or hospital.• SNOW: Weak TV signals from long distant stations result in an instead picture and give the effect of falling snow. An antenna adjustment or antenna amplifier may be needed.• GHOST: Multiple image, caused by TV signals reflected back from surrounding buildings, hills, aircraft, etc. is minimized by correct aerial positioning.• CAR IGNITION: Nearby cars and electrical motors can cause small streaks across the picture or make the picture roll.General Information

General Information
15Accessories1. LED TV 1 pc2. Remote controller 1 pc 3. Stand 1 pc4. Screw 3 pcs5. Consumer information 1 pc6. Warranty card 1 pc7. Instruction manual 1 pcSpecificationsSize (diagonal) 31.5” (80 cm)Resolution 1366x768Aspect ratio 16:9Response time 6.5 msColor system PAL, SECAM, NTSCSound system B/G, DK, INICAM Stereo 2 x 10 W Composite AV RCA in +PC audio input +VGA in +HDMI in x3Headphone jack +Coaxial output +DVB-T2 module +PCMCIA interface (CI, CI+) +Russian and English OSD +Progressive scan +Digital comb filter 3DSleep timer +USB movie, audio and photo support +Quantity of channels 100 analogue/1000 digitalTeletext 1000 pagesElectric shock protection class IINominal voltage range: AC ~100–240 V; 50/60 Hz;Specific power rating in operation mode: 0.02 W/cm2Power consumption in operation mode: 56 WPower consumption in stand-by mode: 0.5WUnit dimensions: without stand 750 x 74 x 460 mm with stand 750 х 200 х 510 mm Net weight 8.9 kg The LED panel is a high technology product with many thin film transistors that can give you a fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green, red, black or white, please note that this does not affect the performance of your LED TV.Warning: Specifications may be subject to change without notice for improvement.General Information

General information
1614General information

Содержание
1715СодержаниеУважаемый покупатель!Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-пасно пользоваться приобретенным устройством, рекомендуется тщательно изучить настоящее руководство перед подключением и эксплуатацией изделия. Сохраняйте руководство для использования в будущем.Содержание Перед началом эксплуатации Утилизация изделияМеры предосторожностиУстановкаУстановка на подставкуКрепление на стенуПодключениеПодключение внешней антенныПрочие подключенияУправление устройствомЭлементы управления Передняя панель Задняя панельПульт дистанционного управленияУстановка батареекОбщие операции Источники сигналаОперации с телетекстомЭкранное менюНастройка изображенияНастройка звукаНастройка каналовНастройка функций Меню настройкиОперации с USBОбщая информацияВоспроизведение файлов Электронный телегид (EPG)Общая информацияРуководство по устранению неисправностейИсточники помехКомплект поставкиТехнические характеристики17181818202020212121222222222323242424252526262727282828303131313233

Перед началом эксплуатации
1816Перед началом эксплуатацииЕсли вы желаете утилизировать данное изделие, не выбрасывайте его вместе с обычным бытовым мусором. Существует отдельная система сбора использованных электронных изделий в соответствии с законодательством, которая предполагает соответствующее обращение, возврат и переработку.Обращайтесь в органы местного управления за инструкциями по правильной утилизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия с соблюдением обязательных процедур по обработке, утилизации и вторичной пере-работке и, таким образом, предотвратите потенциальное негативное воздействие на окружающую среду и здоровье людей.Утилизация изделияМеры предосторожности• Пожалуйста, извлеките шнур пита-ния из розетки и свяжитесь с сервисной службой в следующих случаях: если в устройстве имеются явные неисправности, например, из него идет дым, чувствуется специфический запах или слышен неха-рактерный звук; если внутрь устройства попала жидкость или посторонние предме-ты; если нет изображения или звука; если поврежден корпус или панель; если Вы пользуетесь устройством согласно инструк-ции, но оно не работает должным образом.• Данное изделие может подключаться к розетке питания как без заземляющего третьего контакта, так и с заземляющим третьим контактом.• Во избежание поражения электриче-ским током защищайте шнур питания от возможного нажатия на него или защемле-ния, особенно рядом с разъемами.• Не закрепляйте шнур питания метизами.• Если Вы не пользуетесь устройством длительное время или в случае грозы обязательно отключайте шнур питания из розетки, а также отключайте все сигналь-ные кабели от входных разъемов.• При отключении вилки из розетки всег-да держитесь за утолщение на вилке, не касайтесь металлических частей, не тяните за шнур и не ломайте и не перегибайте его, не ремонтируйте, не перекручивайте и не нагревайте.• Немедленно свяжитесь с сервисным центром, в случае если имеются какие-либо неисправности шнура питания, в нем оголи-лись жилы или он поврежден.• Замените сетевую розетку, если в нее невозможно вставить вилку или вилка плохо закрепляется в розетке. Иначе могут возникнуть неисправности или произойти несчастные случаи или возгорания.• Не прикасайтесь к проводам мокрыми руками.• Запрещается использование розетки, в которую подключено несколько устройств. Перегрузка такой розетки может привести к пожару.• Место подключения вилки шнура питания к сети 220 В должно оставаться легкодоступным.• Перед работой с устройством необ-ходимо полностью прочитать и понять все инструкции. Необходимо соблюдать все пред-упреждения и следовать всем инструкциям, приведенным в настоящем руководстве.• Пожалуйста, используйте только реко-мендованные производителем аксессуары.

Перед началом эксплуатации
1917Перед началом эксплуатацииИспользование других аксессуаров может привести к неисправностям.• Пожалуйста, проводите все настройки и регулировки только с помощью кнопок на передней и боковой панелях или на пульте дистанционного управления. Ни в коем случае не снимайте заднюю панель и не пытайтесь самостоятельно проводить техническое обслуживание устройства, так как существует опасность поражения электрическим током, а также возможно возникновение неисправностей.• Не устанавливайте устройство на непрочные или неровные поверхности, тележки, стойки, треноги, кронштейны или столы. Устройство может упасть, в результате чего могут возникнуть неисправ-ности или произойти несчастные случаи. Используйте только те приспособления, которые рекомендованы производителем или продавцом.• Пожалуйста, устанавливайте устрой-ство на горизонтальной поверхности в ме-стах с хорошей вентиляцией. Не допускайте воздействия на устройство вибрации, пря-мого солнечного света, высокой температу-ры, а также попадания пыли и влаги.• Не ставьте на устройство вазы, сосуды с жидкостью. Попадание жидкости внутрь аппарата может привести к пожару или по-ломке устройства.• Не устанавливайте устройство в зоне магнитных волн. Это может привести к по-ломке устройства. В зоне электромагнитно-го излучения может наблюдаться искаже-ние изображения.• Не устанавливайте вблизи устройства источники открытого огня, например, свечи. В случае их падения устройство может быть повреждено или может произойти возгора-ние.• Установка телевизора в замкнутое пространство при эксплуатации может со-кратить срок службы устройства; поэтому необходимо обеспечить минимальную дистанцию между LED-телевизором и внутренними границами приспособления под аппарат для нормальной вентиляции (минимум по 10 см свободного простран-ства со всех сторон).• Располагайте кабели позади устрой-ства. Не закрепляйте их метизами, не пере-гибайте, не ремонтируйте и не нагревайте.• При перемещении телевизора не нажимайте и не касайтесь панели. Не пере-носите телевизор в положении, при котором экран направлен вверх или вниз.• Не перемещайте устройство при под-ключенном проводе питания или других подключенных проводах. Повреждение про-вода питания, подключенный провод или подключенные устройства могут стать при-чиной пожара, электрошока или поломки.• Если устройство тяжелее 18 кг, его должны перемещать не менее 2 человек. При падении устройство может повредиться.• Слишком сильное нажатие на панель может повредить устройство.• При длительном использовании может немного повысится температура корпуса устройства. Это явление свидетельствует о теплоотдаче в нормальном рабочем режи-ме. Однако не позволяйте детям и людям с повышенной температурной чувствительно-стью касаться устройства.Все иллюстрации, приведенные в на-стоящем руководстве, являются схе-матическими изображениями, которые могут отличаться от реальных объектов.

Перед началом эксплуатации
2018Установка/ПодключениеУстановкаУстановка на подставкуВыберите ровную плоскую горизонталь-ную поверхность, накройте ее мягкой тка-нью и разместите на ней корпус телевизора экраном вниз. Присоедините подставку к основанию таким образом, чтобы отверстия в подставке и в основании совпадали. За-фиксируйте подставку с помощью 3 винтов. Присоедините подставку вместе с основа-нием к задней части корпуса телевизора таким образом, чтобы отверстия в под-ставке и в корпусе совпали. Зафиксируйте подставку с помощью 4 винтов.Крепление на стену• Перед установкой телевизора на стену отделите подставку от корпуса, предвари-тельно вывернув 4 винта, фиксирующих подставку на нижней части корпуса.• Для крепления на стену на задней па-нели телевизора имеются 4 отверстия. Для крепления следует использовать настенный кронштейн стандарта VESA (в комплект поставки не входит и приобретается отдель-но). Производитель не несет ответственно-сти за неправильно выполненный монтаж, повлекший повреждение телевизора.Средства для монтажа аппаратуры на стене или потолке должны быть доста-точными для выполнения своей функ-ции.