Telematrix SIP 9600IP User manual

1
9600IPPHONE
USERMANUAL
FORMODEL: SIP9600IP,SIP9602IP
Version v1.0

2
CONTENTS
1.INTRODUCTION....................................................................................5
1.1 OVERVIEW OF HARDWARE .........................................................................5
1.2 OVERVIEW OF SOFTWARE ..........................................................................5
2.9600IPPHONEKEYBOARD...................................................................7
2.1 KEYBOARDSFUNCTIONS............................................................................7
2.1.1FunctionTableofBaseKeyboard.....................................................7
2.1.2Functiontableof handsetkeyboard.................................................7
2.2 KEYBOARD FUNCTION...............................................................................7
2.2.2Voice Control................................................................................8
2.2.3HoldFunction...............................................................................8
2.2.4Register handset...........................................................................9
2.2.5Deletehandset.............................................................................9
2.2.6Call--forward................................................................................9
2.2.7Threewayconferencecall..............................................................9
2.2.8LineSwitch................................................................................10
2.3 FUNCTIONSANDSETTINGCATALOG.............................................................10
2.3.1Menucatalog..............................................................................10
2.3.2Network.....................................................................................10
2.3.3CallFeature................................................................................11
2.3.4SIP............................................................................................11
2.3.5DSP...........................................................................................12
2.3.6System......................................................................................12
2.3.7Other Setting..............................................................................12
2.3.8Settingcatalog...........................................................................12
3.THROUGHWEB BROWSERTOSETPHONE..........................................13
3.1 LOGON..............................................................................................13
3.2 CURRENTSTATE ...................................................................................13
3.3 NETWORK ..........................................................................................13
3.3.1Wan Config.................................................................................13
3.3.2LANConfig.................................................................................15
3.4 VOIP................................................................................................15
3.4.1SIPConfig..................................................................................15
3.4.2Iax2Config................................................................................18
3.5 ADVANCE ...........................................................................................20
3.5.1DHCPServer..............................................................................20
3.5.2NAT...........................................................................................21
3.5.3STUN.........................................................................................22
3.5.4NetService................................................................................22
3.5.5Firewallsettings..........................................................................23
3.5.6VLANConfiguration.....................................................................24
3.5.7DigitalMap.................................................................................25

3
3.5.8CallService Settings....................................................................26
3.5.9MemoryKey...............................................................................27
3.5.10MMIFilter.................................................................................28
3.5.11DSP.........................................................................................28
3.5.12VPN.........................................................................................29
3.6 DIAL-PEERDIALRULESETTING ..................................................................29
3.7 CONFIG MANAGE ..................................................................................30
3.8 UPDATE FIRMWARE................................................................................31
3.8.1Update......................................................................................31
3.8.2Auto Update...............................................................................32
3.9 SYSTEM MANAGE..................................................................................33
3.9.1AccountManage.........................................................................33
3.9.2Syslogconfig..............................................................................33
3.9.3PhoneBook................................................................................34
3.9.4TimeSet....................................................................................34
3.9.5MMISET....................................................................................35
3.9.6Logout&Reboot.........................................................................35
4.OPERATINGMETHOD FORDIALING...................................................37
4.1 HOWTODIAL IP PHONE..........................................................................37
4.2 SETTHEPHONEBEINGCONNECTEDTOSERVER ...............................................37
4.2.1SettheWANinterface.................................................................37
4.2.2SIPsetting.................................................................................39
4.2.3IAX setting.................................................................................40
4.3 HOWTOUSETHEDIAL RULE?....................................................................40
4.4 VOICE MAIL ........................................................................................42
Afterphoneisboot-upandobtainstheTFTPServeraddressthrough
DHCPSever,thenphonewill produce toot-toot”soundtoprompt
entering Config ID”.AfterinputtingIDthroughthenumerickeyboard
and #”forending,phonewillauto-downloadtheconfig filefrom TFTP
Server.Ifthedownloadissuccessful,phonewillbere-boot;iffailed,
15slaterphonewill enterinto defaultstandbystatus;ifyoudonotwant
todownload,youcanpress"#"directlyforenteringinto thedefault
standbystatus;ifthedownloadisnot completedorthedownloaded
configfile auto updatemodule”hasno configparameterinthe config
filename”,phonewill still promptinput ting Config ID”after re-boot.
After phoneentersinto thedefaultstandbystatus,pressing **47”key
willmakethephoneauto-broadcastitsownIPaddress.

4
Function
1.ProvideaBackupSIPServer
2.SupportNAT,Firewall
3.SupportDHCPassigningIPaddress,etcautomatically
4.SupportPPPoE (used whileconnectingADSL，cablemodem)
5.It can updatetheprogramthrough HTTP,FTPandTFTP
6.Checkthedynamicvoice; Softthenoise; Buffer techniqueof voice
7.HoldFunction
8.HotlineFunction
9.Speed-dial
10.Call-forward,Three-wayconferencecall
11.DND(DoNotDisturb),BlackList,LimitList
12.Auto-answer.
13.SetthroughstandardWeb Browser
14.RemoteManagementFunction
15.Classification managementfor commonuser spasswordandsuperuser s
password.
16.Broadcast theIPaddress,Vlan ID,versionnumber andphonenumber.
17.CordlessHandset,1.9GHzOperation,with HandshakeTechnology
Standard and Protocols
◆IEEE802.3 /802.3u10BaseT/ 100BaseTX
◆PPPoE
◆DHCPClientandServer
◆SupportG.711a/u,G729,G72315.3/6.3audioCodec
SIPRFC3261,RFC2543
◆SupportIAX2
◆TCP/IP: Internettransfer andcontrolprotocol
◆RTP:Real-timeTransportProtocol
◆RTCP: Real-timeControl Protocol
◆VAD/CNG savebandwidth
◆Telnet: Internet'sremoteloginprotocol
◆DNS: DomainNameServer
TFTP:TrivialFileTransfer Protocol

5
1.Introduction
Thisistheuser manualof 9600IP.Someconfigurationshouldbe donebefore
use the9600IPphone, andthenitcanworknormally.Thismanualwillillustratehow
tosetthephonethroughkeyboardandwebservice.
1.1OverviewofHardware
1.1.1
Thetwo RJ-45 networkinterfacesupportthe10/100MEthernet.Thedefault
WANinterfaceisaDHCPClientserver.User connecttheWANinterface to ADSL or
switch,andconnect theLANinterface （thedefaultIPaddressis192.168.10.1)to
thecomputer.You can use theadministrator suser name “admin”andpassword
“admin”tologinandset.
1.1.2
OnlytheWANinterfacesupports thePOE.
1.2OverviewofSoftware
NetworkProtocol Tone
lRingTone
lRingBackTone
lDialTone
lBusyTone
PhoneFunction
lSIPv1(RFC2543)
v2(RFC3261)
lIP/TCP/UDP/RTP/RTCP
lIP/ICMP/ARP/RARP/SNTP
lTFTPClient/DHCPClient/PPPOE
Client
lTelnet/HTTPServer
lDNSClients
Codec lVolumeAdjustment
lSpeeddial key
lPhonebook
IPAssignment
lG.711 64Kbit/s(PCM)
lG.723.1 63k/5.3kbit/s
lG.726 16k/24k/32k/40k
bit/s(ADPCM)
lG.729A 8kbit/s(CS-ACELP)
lG.729B addsVAD&CNG toG.729
lIP(StaticIP)
lDHCP
lPPPoE
VoiceQuality Security
lHTTP1.1 basic/digest
authenticationforWeb setup
lMD5 forSIPauthentication
(RFC2069/RFC2617)
QoS
lVAD Voice activitydetection
lCNG Comfortablenoisegenerator
lLEC Lineechocanceller
lPacketLossCompensation
lAdaptiveJitter Buffer
lQoSfield
Call Function NATTraversal
lSTUNlCall Hold
lCall Waiting Configuration

6
lCall Forward
lCaller ID
l3-wayconference
lWeb Browser
lConsole/Telnet
lKeypad
DTMF FirmwareUpgrade
lDTMFRELAY
lDTMFRFC2833
lDTMFSIPInfo
SIPServer
lTFTP
lHTTP
lFTP
ProvideaBackupSIPServer

7
2.9600IPphonekeyboard
2.1Keyboardsfunctions
2.1.1FunctionTableofBaseKeyboard
Name Status Function
Store On-hook To enter storagemodefor speeddialing
Flash On-hook Toenterthedeletingmodefor pressingdown3seconds
Redial Dialing Re-dial thelast called number
On-hook It scallinghandsetfor press downforalittletimeand
registeringwith handsetfor pressingdown3secondsLocate Call callingthehandset
Volume+ Call Increasethevolume
Volume- Call Decreasethevolume
Speak Handsfree
Mute Call Mute
Hold Talking Holdingthecurrenttalkingline
Line1 Talking Holdingline2orretrieved line1
Line2 Talking Holdingline1orretrieved line2
On-hook
M1~M10 Dialing 10 speeddialnumbers
On-hook
Voicemail Dialing Pickupvoicemail
1 Dialing “1”
2 Dialing “2”
3 Dialing “3”
4 Dialing “4”
5 Dialing “5”
6 Dialing “6”
7 Dialing “7”
8 Dialing “8”
9 Dialing “9”
0 Dialing “0”
* Dialing “*”
# Dialing It canberegardedasthefirst numberbeingdialedoutor
theendmarkfor endingnumber.
2.1.2Functiontableof handset keyboard
2.2KeyboardFunction
Item Status Function
ON/OFF On/offHookswitchofHandset
Hold/conf Call Call Waitingor3 wayconference
Mute Call Mute

8
Redial Dialing Redialthenumber oflasttime
Volume+ Call Increasethevolume
Volume- Call Reduce thevolume
Flash Off-Hook Quicklycutoff thecurrentlineandoff-hook
again.
Dialing “1”
1 On-Hook Longpressingcanpickupthemessage
Dialing “2”
2 On-Hook Longpressingcancallthenumber stored in
mem6 onthebaseunit
Dialing “3”
3 On-Hook Longpressingcancallthenumber stored in
mem7 onthebaseunit
Dialing “4”
4 Off-Hook Longpressingcancallthenumber stored in
mem8 onthebaseunit
Dialing “5”
5 On-Hook Longpressingcancallthenumber stored in
mem9 onthebaseunit
Dialing “6”
6 On-Hook Longpressingcancallthenumber stored in
mem10onthebase unit
7 Dialing “7”
8 Dialing “8”
9 Dialing “9”
0 Dialing “0”
Dialing “*”
* On-Hook Longpressingfor3seconds enteringintothe
registrationstatusof thehandset
# Dialing It canbe regarded asthefirstnumberbeing
dialedoutortheendmarkforending
number.
2.2.1Storenumbers
Press “STORE”keyto enter intothesettingstateof storingkeys,andinput
storingnumber,thenpress thecorrespondingstoringkeyto storethenumbers.
2.2.2VoiceControl
Pressing “VOL+”toincreasethevolume, andpress “VOL-”to decrease the
volume.
2.2.3HoldFunction
It isused forholdingthecurrentlineorforwardingtootherhandset,for
example:
Whenyou usethe#1handset andwanttouse the#2inacall,nowyou need

9
toholdthe#1 handsetthenpickupthe#2handset.
2.2.4Register handset
UnderOn-Hookstatus,pressingthe “Locate”keyonthebaseunitfor three
seconds toenablethehandsetregistermode,andtheCharge indicator lightflashes
at thesametime;thenpress “*”keyfor threeseconds toenablethehandset
registermode,thenON/OFF indicator lightonthehandset ,andwillgivetheprompt
tonefor successfulregistration.
2.2.5Deletehandset
Keep pressingthe “FLASH”keyonthebaseunitfor threeseconds,theSpeaker
will give “beep”sound,then
Press “0”onthebaseunittodeleteall thehandset.
Press “1”onthebaseunittodeletethefirst handset.
Press “2”onthebaseunittodeletethesecondhandset.
Press “3”onthebaseunittodeletethethirdhandset.
Press “4”onthebaseunittodeletethefourthhandset.
Afterpressedthenumberkeys,Charge indicator lightwill flashes,whichmeans
thehandsetisbeingdeleted bythephone.WhenChargeindicator lightstops
flashing,itmeansthatthedeletionisfinished.
2.2.6Call--forward
The “EnableCallTransfer”inthe “Call ServiceSetting”shouldbe in chosen
mode(thedefaultoneischosenmode).Supposetheuserof9600IPisuserA,and
userBcalled userAthroughVoIP ，duringthecommunication,userBwanttomake
acall touserC,thenuserAshouldpressFWD,afterthatuserBcancalluserC
throughdialingnumbers.
2.2.7Threewayconferencecall
2.2.7.1 Threewayconference callof thehandset
1)Choosingthe “EnableThreeWayCall”of “Call ServiceSetting”(thedefault
option statusof thephone),supposetheuserofthe9600IPphoneisA,andifuser
BcallsuserAthroughVoIPphone,userBneedstomake3-wayconferencecall with
userAandC,thenuserAcanusethesecondlinetocall userC,thecall
auto-maintainwithuserB,duringtheconversationwithC,pressingdown “*”,then
canmake3-wayconference call.
2)Choosingthe “EnableThreeWayCall”of “Call ServiceSetting”(thedefault
option statusof thephone),supposetheuserofthe9600IPphoneisA,andifuser
BcallsuserAthroughVoIPphone,userBneedstomake3-wayconferencecall with
userAandC,thenuserAcanusethesecondlinetocall userC,thecall
auto-maintainwithuserB,duringtheconversationwithC, pressingdown “Conf”,
then can make3-wayconferencecall.
2.2.7.2 Threewayconference callof thebase unit
Choosingthe “EnableThreeWayCall”of “CallServiceSetting”(thedefault
option statusof thephone),supposetheuserofthe9600IPphoneisA,andifuser
BcallsuserAthroughVoIPphone,userBneedstomake3-wayconferencecall with
userAandC,thenuserAcanusethesecondlinetocall userC,thecall
auto-maintainwithuserB,duringtheconversation withC, pressingdown “*”can

10
make3-wayconferencecall.
2.2.8LineSwitch
2.2.8.1 HandsetLineSwitch
1）Supposetheline1/2of handsetistalking,theline2/1 isholding,ifyou want
toimplementlineswitch,first youneedtopressdown “Hold ”,thenpressdown
“ON/OFF”of thechoiceline. Youcan implementlineswitch.
2)Suppose theline1/2ofhandsetisholding,theline2/1isdialing,if youwant
toswitchtoline1/2talking,first hangupline2/1,thenpress down “ON/OFF”of
Line1/2 or press “HOLD”.You canimplementlineswitch.
2.2.8.2 BaseunitLineSwitch
Supposetheline1/2of thebaseunitistalking, line2/1isholding,pressdown
“line2/1”directlyandswitchto line2/1talking
2.3Functionsand settingcatalog
2.3.1Menu catalog
1)Network
2)Call Feature
3)SIP
4)DSP
5)System
6)OtherSetting
2.3.2Network
2.3.2.1LAN
1) Bridge Mode
2) IP
3) Netmask
4) DHCPServer
Switch
DNS Relay
5）NAT
Switch
FTPalg
PPPTPalg
2.3.2.2 WAN
1)Status
2)StaticNet
IP
NetMask
Gateway
DNS
DNS2
3)PPPOE
User name
Password
4) QoS

11
2.3.3Call Feature
23.3.1Phone-number
1) PublicSIP
2) PrivateSIP
2.3.3.2 Limit-List
1) Current
2) ADD
3) DEL
2.3.3.3Black-List
1) Current
2) ADD
3) DEL
2.3.3.4FastCall
2.3.3.5ThreeTalk
2.3.3.6Call-Transfer
2.3.3.7Call-Waiting
2.3.3.8Call-Forward
1) Condition
2) SIP
Transfer Num
Transfer IP
Port
2.3.3.9Dial-Rule
1)Endwith “#”
2) FixedLength
Switch
Length
2.3.4SIP
2.3.4.1 Reg Status
1)PublicReg
2)PrivateReg
2.3.4.1RegSwitch
1)Public
2)Private
2.3.4.2Server
1)Public
2)Private
2.3.4.3Domain
1)Public
2)Private
2.3.4.4User Agent
1)Public
2)Private
2.3.4.5Detect-server

12
2.3.4.6Dtmf-mode
2.3.4.7Interval-time
2.3.4.8Swap-server
2.3.4.9RFC-version
2.3.4.10 Signal-Port
2.3.4.11 Stun
1)Switch
2) Addr
3)Port
4)ExpireTime
2.3.5DSP
2.3.5.1 Codec
2.3.5.2 Handdown-time
2.3.5.3 Dtfm-Volume
2.3.5.4 Input-Volume
2.3.5.5 Output-Volume
2.3.6System
2.3.6.1 Save
2.3.6.2 Reboot
2.3.6.3 SetDefault
2.3.7Other Setting
2.3.7.1 Syslog
1)Switch
2)Server-IP
3)Server-Port
2.3.8 Settingcatalog
1.Pressingdownthe “Menu”keytoenterthesettingstatusof speed dialkey
andinputtheneededsavingNo.,thenpressthecorrespondingspeeddialkeyto
save.
2.Pressingdown “Menu”above3secondstoenterthesettingstatusandthe
defaultkeywordis123,andthenyou canpress “Enter”toenter, “Menu”toexit.
3.Whenmodifyingthesetting,press “Redial”toentermodification status,and
“0”istomakenochoice, “1”istomakechoice, “Enter”istoconfirmthemodification,
and “Menu”istoquitthemodification.Afterfinishedthemodificationsetting,we
will saveiton “Save”menu.After rebootingall thesettingswill bego intoeffect.

13
3Throughweb browser to setphone
Plugoneendof thenetworklinetothenetworkcardportof thecomputer,the
other endtoLanportofthephone, phonewill obtain theIPaddress automatically,
open IE,inputtheIPaddressonAddresscolumn,thenenter intotheWeb Setting
Page.Themethodof obtainingthedynamicIPaddressis:undertheon-hookstatus,
press “**47#”,thenphonewillbroadcast thecurrentIPaddress.
3.1Logon
Thedefaultuser nameandpasswordareadmin/admin andguest/guest.and，
admin/adminissuperusernameandpassword，guest/guestiscommonusername
andpassword。Logoninterface isasfollows
3.2Current state
Thispage layoutshowstheworkstateofVoIPphone.Thenetworkpartshows
theconnectionstateofWANinterfaceandLANinterfaceandthenetworksetting;
theworkstateofPublicSIPservice ofVoIPpart,andhereyou canseethe
registration andwhetherregistered totheserverornot.ThePhoneNumberpart
showsthetelephonenumbersinPrivateSIPserverandPublicSIPserver.
3.3Network
3.3.1WanConfig
WANportnetworksettingpage.
SupportstaticIP,dynamicobtain IPandPPPoE.

14
ConfigureStaticIP:
----Enable Static;
----Set9600IP sIPaddressin the IPAddress;
----Setnetmaskinthe Netmask field;
----SetrouterIPaddressin the Gateway;
----DNSDomain:
----Setlocal DNS serverin the PreferredDNS andthe AlternateDNS。
Configureto dynamicobtain IP
----Enable DHCP;
If thereisDHCPserver in yourlocal network,9600IPwillautomaticallyobtain
WANportnetworkinformation fromyour DHCPserver.
ConfigurePPPoE:
----Enable PPPoE

15
----PPPoE server: Enter “ANY”if nospecifiedfromyour ITSP.
----Enter PPPoE usernameandpasswordinthe username and password.
9600IPwill automaticallyobtainWANportnetworkinformationfromyourITSP
if PPPoE settingandthesetuparecorrect.
Notice:IfuseraccessestheIPphonethroughWANport.He/Sheshoulduse
thenewIPaddress toaccesstheIPphonewhentheWANportaddress was
changed.
3.3.2LANConfig
LANIP/Netmask: SettheIPandNetmaskfor theLAN
DHCPServer: EnableDHCPservice in LANport;afteruserchanged LANIP,
phonewillautomaticallymodifyDHCPLeaseTableandsavetheconfigure
accordingto IPandNetmask,DHCPserver configurewon ttakeeffectunless you
rebootthedevice.
NAT: EnableNAT.
BridgeMode:Enablethisoptiontoswitchtobridge mode.IPphonewon t
assignIPforits LANportin bridge mode andits LANandWANportwill be in the
samenetwork.(Thissettingwon ttakeeffectunlessyousavetheconfigandreboot
thedevice)
3.4VoIP
3.4.1SIPConfig
Settingpageof publicSIPserver:

16
Register ServerAddr: Register addressof publicSIPserver;
RegisterServerPort: RegisterportofpublicSIPserver defaultportis5060;
RegisterUsername: Usernameof yourSIPaccount(Alwaysthesameasthe
phonenumber);
Register Password: Passwordofyour SIPaccount.
Proxy ServerAddr: IPaddressof proxy SIPserver(SIPprovideralwaysuse
thesameIPforregisterserverandproxyserver,in thiscaseyou don tneed to
configuretheproxyserver information.);
Proxy Server Port: SignalportofSIPproxy;
ProxyUsername: proxyserverusername;
ProxyPassword: proxyserverpassword;
DomainRealm: SIPdomain,entertheSIPdomainif any,otherwise9600IP
will use theproxyserver addressasSIPdomain.
LocalSIPport: LocalSIPregister port,default5060;
PhoneNumber: Phonenumber of yourSIPaccount;
EnableRegister: Enable/DisableSIPregister.9600IPwon tsendregister info
toSIPserverif disableregister.
EnableMessageWaiting Theconfiguration allows/forbidsMessageWaiting.
Advanced SIPSetting

17
RegisterExpireTime: Registerexpirestime,defaultis60 seconds.9600IP
will autoconfigurethisexpiretimetotheserverrecommendedsettingifitis
differentfromtheSIPserver.
NATKeepAliveInterval NATkeep aliveintervaltime,thedefaultis60
seconds;
Forward Type: thetypeof call forward;(thedefaultisOFF);
OFF: Disablecallforward;
Busy:If thephoneisbusy,itwill forwardto theappointed phone;
Noanswer If noanswer,itwillforwardtotheappointedphone;
Always Thecaller alwaysforwardtotheappointed phone.
Forward Photo Number Call theforwarded phonenumber.
SignalKey SettingSignalKey;Inordertopreventblocking,cooperate
platformto encryptsignal,inputkeyhere,
MediaKey: SettingMediaKey;
SubscribeExpireTime: Configthetimeofsendingsubscription
message;Eachintervaltime,sendingasubscription message.mainlysubscribe
other sstateor voice message.
EnableURIConvert EnableURIConvertfunction,Exchange ‘#to ‘%23 and
sendingout.
ClickToTalk: Click-to-CALL function；thisfunctionrequiresanexternal
softwaretoachieve, Clickabutton tocallAintheexternalsoftware, atthistimeyou
receivethiscommand,you will callA initiatively.
EnableKeepAuthentication: Whetherallowthephonesupportregisterwith
authentication directlytosendornot,Suchdevicedonotcertificationrequirment
andresponsewithservereverytime, Aftertheserverreceived arequestwiththe
registration of certification,Theserver candirectlyreplyconfirmationmessage.
DetectIntervalTime Setserverdetectintervaltime，ifphoneopenSIPdetect
server function，itwill detect server everytimewhether ornotto respond.

18
Signal Encode:Opensignalencrypt;
Rtp Encode: Openvoiceencrypt;
EnableViarport:WhethersupporttheRFC3581 ornot.EnableViarportis
used ininside network,andneeds SIPserversupport.Tomaintainnetwork
equipmentwithnetdevice outside of NATconnection.
EnableSession Timer:WhethersupporttheRFC4028ornot.Atacertain
periodoftimetorefreshconversation ,in casealongtime,theotherside dropoffor
breakoff,after refresh ,theother side didnotrespond,wewill hangup.
EnablePRACK:Whether thephonesupportSIP-prackfunction(used mainlyin
theCRBT).Whenyou receive183signal,youcansendprack
message.Recommendto usethedefaultconfigration.
Answer With SingleCodec:When calledto do,Onlyin response to Codec.
LongContact:ConfigContact fieldbringmoreparameter.
Auto TCP:Whenthmessagebodyexceeds1300bytes,automatictransmission
usingtheTCPprotocol,to protecttheavailabilityoftransmission.
DetectIntervalTime: Co-workwiththeAutoDetectServer,ifAutoDetect
Serverisenable,9600IPwill periodicallydetectiftheSIPserverisavailable
accordingthissetting.
EncryptKey: Theparticularservice systemdecryptsofthekey,matchingwith
theserverTypeusage, thekeyprovide bytheparticularservicesystemsupplier,
defaultisempty
ServerType Theparticularservicesystemsuppliercarriesoutthesignand
speechesto encrypt,defaultiscommon；
DTMFMode: DTMFsignalsendingmode:supportRFC2833,DTMF_RELAY
(inbandaudio)andSIPinfo
RFCProtocolEdition: Current9600IPSIPversion.SettoRFC2543ifthegate
need tocommunicatetodevices (suchasCISCO5300)usingtheSIP1.0.Defaultis
RFC3261.
3.4.2Iax2Config
Settingpageof publicIAXserver:

19
IAXServer Addr: RegisteraddressofpublicIAX server；
IAXServer Port: Register portof publicIAX server defaultportis4569；
Account Name: Usernameofyour SIPaccount(Alwaysthesameasthephone
number)；
Account Password: Passwordofyour IAXaccount.
Localport: Signalportof local,defaultportis4569；
PhoneNumber: Phonenumber of your IAX account；
Voicemail number: IftheIAX supportvoicemail,butyour usernameof the
voice mail isletterswhichyou cannotinputwiththeATA,thenyouuse thenumber
tostandfor yourusername；
Voicemailtext: if IAXsupportvoicemail,configthedomainnameofyour mail
boxhere.
Echo testnumber: Iftheplatformsupportecho test,andthenumberistest
form,configthetestnumberto replacethetextformat Theecho testistotestthe
workingstatusof terminalsandplatform;
Echo testtext: echotestnumberintextformat;
Refreshtime: IAXrefresh time;
EnableRegister: enableor disableregister;
EnableG.729: UsingG.729 speechcodingmandatoryconsultations
IAX2 (DefaultProtocol): SetIAX2asthedefaultprotocol,if notthesystem
will chooseSIPasdefault;

20
3.5Advance
3.5.1DHCPServer
DHCPserver managepage.
User maytrace andmodifyDHCPserver informationinthispage.
DHCPLeaseTable displaytheIP－MACcorrespondingtablethat theserver
distributed.
LeaseTableName: Leasetablename.
StartIP: StartIPof lease table.
EndIP: EndIPof leasetable. Networkdevice connectingtothe9600IPLAN
portcandynamicobtaintheIPintherangebetweenstartIPandendIP.
LeaseTime: DHCPserver leasetime.
Netmask: Netmaskof leasetable.
Gateway: Defaultgatewayof lease table
DNS: defaultDNS server ofleasetable.
DNSRelay: enableDNS relayfunction.
User mayuse belowsettingtoaddanewleasetable.
Notice:Thissettingwon ttakeeffectunlessyou savetheconfigandrebootthe
device