Telematrix Marquis Series 3300LBY User manual

3300 SERIES ANALOG
USER GUIDE
3300LBY, 3300MWB, 3300MW5, 3300MW10, 3300MWD5,
3300MWD, 3302MWD5, 3302MWD, 3300TRM

Table of Contents
3300 Series Analog Phone Map ............. 3
3300 & 3302 Trimline Phone Maps........... 4
3300 Series
Parts Check List ......................... 5
Care and Maintenance .................... 5
Installation .............................. 5
Caution Information .................... 5
Connecting the Handset Cord ............ 5
Connecting the Line Cord ............... 5
Connecting to Data Port ................ 5
Wall Mounting ........................... 5
Wall Mounting (optional) ................ 5
Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Message Waiting Selectors .............. 6
USA/Domestic Configuration ......... 6
European Configuration ............. 6
Features ................................ 6
Operation ............................... 6
Volume ............................... 6
Handset and Speaker Volume Control ... 6
Ringer Volume Control ............... 7
Indicators............................. 7
Speaker and Mute Key Connecting
and Status Indicators ................ 7
Using the Mute Feature on
Speakerphones ........................ 7
Using the Conference Key on
Speakerphones ........................ 7
Calling ............................... 7
Placing a Call Using the Handset ..... 7
Receiving a Call Using the Handset
or Speaker ........................ 7
Placing a Call Using the
Speakerphone ...................... 7
Programming............................ 8
To Program Store, Flash, and Pause ...... 8
Storing a Number into Memory Keys—Store ...8
Programming Flash Timing and Pause
Timing ............................... 8
Storing Pause/Redial into Memory—Pause ... 8
Flash Hook Function—Flash ............. 9
Programming Message Waiting
OneTouch Key into Memory—OneTouch .... 9
3300 & 3302 Trimline
Parts Check List ......................... 9
Features ................................ 9
Installation .............................. 9
Caution .............................. 9
Connecting the Line Cord .............. 10
Connecting the Handset Cord ........... 10
Wall Mounting .......................... 10
Handset Retaining Clip ................ 10
Switch Setting .......................... 10
Flash Switch ......................... 10
Message-Waiting Switch ............... 10
Ringer Volume Control Switch .......... 10
Operation (Two-Line)..................... 10
Line Status Indicators ................. 10
Placing a Call......................... 11
Receiving a Call ....................... 11
To Place a Call on Hold ................. 11
Statement of Limited Warranty ............ 11
Important Safety Instructions ............. 12
FCC Interference Information.............. 13
FCC RF Radiation Exposure Statement ...... 13
Industry of Canada Requirements..............13
Requirements of Part 15—FCC Rules ....... 14
Requirements of Part 68—FCC Rules ....... 14
2 www.telematrix.net 3300 SERIES ANALOG USER GUIDE

3300 SERIES ANALOG USER GUIDE www.telematrix.net 3
3300 Series Analog Phone Map
23
24
25
Base Underside Features & Controls
23. Non-Slip Rubber feet 24. Voltage Settings - 24V, 48V and OFF (factory setting is 24V)
25. Wall Mount bracket attachment slots 26. Wall Mount Bracket with short line cord channel
3300 Series
User’s Guide
www.telematrix.net
[phone] worldwide voice
[email protected]
26
Single and Two Line 3300 Series Telephones:
www.telematrix.net
BASE FEATURES AND CONTROLS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23. Non-Slip Rubber Feet
24. Voltage Settings — 24V, 48V, and
OFF (factory setting is 24V)
25. Wall Mount Bracket Attachment
Slots
26. Wall Mount Bracket

4 www.telematrix.net 3300 SERIES ANALOG USER GUIDE
3300 & 3302 Trimline Analog Phone Maps
CONTROLS
4
CONTROLS
4
1LINE TRIMLINE CONTROLS
1. Redial Key
2. Flash Key
3. Handset Volume Control
4. Dial Pad
5. Line Reset Key
6. Ringer Volume Control
7. Message Waiting Lamp
2LINE TRIMLINE CONTROLS
1. Data Port
2. Redial Key
3. Flash Key
4. Handset Volume Control
5. Dial Pad
6. Line Reset Key
7. Ringer Volume Control
8. Message Waiting Lamp
9. Hold Key
10. Line Status Indicator
11. Line Selector Keys

3300 SERIES ANALOG USER GUIDE www.telematrix.net 5
• Use caution when installing or modifying
telephone and network lines.
CONNECTING THE HANDSET CORD
A 10 ft modular handset coil cord is provided. To
install, simply plug one end of the coil cord into
the jack at the base of the handset, and the other
end into the jack located on the left side of the
telephone base marked Handset.
CONNECTING THE LINE CORD
A 15 ft modular line cord is provided. To install,
simply plug one end of the cord into the modular
jack at the top end of the base unit and the other
end into the wall jack.
CONNECTING TO DATA PORT
The phone is equipped with a data port, a High
Speed Internet Access port on the right side of the
base unit. This receptacle acts as a pass-through
so that the guest may conntect their laptop into the
hotel’s high speed internet system for maximum
effeciency. To connect—place the Ethernet cable
from the wall into the RJ45 receptacle at the top
end of the base. (Does not apply to 3300LBY.)
Wall Mounting
WALL MOUNTING (OPTIONAL)
The 3300 Series telephones is designed to
conveniently wall mount. Please follow these easy
steps:
1. The handset retaining clip must be engaged
to secure the handset when hanging it up.
To engage the clip, unsnap the clip, rotate
the clip 180 degrees and then snap the clip
into place.
2. Plug one end of a short line cord into the line
jack on the back of the base unit. Plug the
other end of the line cord into the wall jack.
3. Attach the wall mount bracket on to the
back of the phone, placing mounting clips
3300 Series
Parts Check List
The following parts are included in this package:
• Line cord
• Handset coiled cord
• Base and handset
• Faceplate
• Plastic faceplate overlay
The following are optional items possibly included
(must be ordered separately):
• Wall mount adaptor bracket
• Short line cord for wall mounting
Care and Maintenance
• Keep the telephone dry. If it gets wet, wipe it
dry immediately. Liquids might contain minerals
that can corrode the electronic circuits.
• Use and store the telephone in a normal
temperature environment. Temperature
extremes can shorten the life of electronic
devices and distort or melt parts.
• Keep the telephone away from excessive dust
and dirt that can cause premature wear of parts.
• Wipe the telephone with a damp cloth
occasionally to keep it looking new. Do not use
harsh chemicals, cleaning solvents, or strong
detergents to clean the system.
Installation
CAUTION INFORMATION
• Never install telephone or network wiring
during a lightning storm.
• Never install telephone or Ethernet jacks in
wet locations unless the jack is specifically
designed for wet locations.
• Never touch uninstalled telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.