Telikou AM-200 User manual

TELIKOU Audio Monitor
AM-200 Two Channel Audio Monitor
User Manual
© 2006 TELIKOU Systems
All Rights Reserved
While TELIKOU makes every attempt to maintain the accuracy of the information contained in
its product manuals, that information is subject to change without notice

TELIKOU AM-200 Two Channel Audio Monitor
1
I. Basic Operation
1. Input Switch
Am-200 has two independent audio channels –Channel A and Channel B. When AM-200
using as stereo monitor, Channel A and Channel works as left sound track and right
sound track. Each Channel has four inputs. Input Switch is used to select specified input.
Channel A and Channel B are individually operation.
2. Listen Level Control
Adjust listen level of Channel A and Channel B individually.
3. Audio Level LED Light beam
Indicate audio level of Channel A and Channel B.
4. Monitor Earphone Connector
Ø6.35mm monitor earphone connector. When monitor earphone working, panel speaker
interrupted. Earphone plug definition as follow：
S - Common
T - Left sound track (Channel A)
R - Right sound track (Channel B)
5. Power Switch
The Power Switch can be used to turn AC power to the AM-200 on or off.
6. Power Light
Switch power on. The green power lights on.
7. Audio Input
Four channels balanced audio input, each channel has one inner paralleled XLR-3M and

TELIKOU AM-200 Two Channel Audio Monitor
2
XLR-3F. XLR-3 definition as follow:
1 - Common
2 –Audio+
3 - Audio-
8. External Speaker Connector
Ø6.35mm external speaker connector. External speaker does not interrupted panel
speaker or monitor earphone. External speaker plug definition as follow:
S - Common
T –Left sound track (Channel A)
R –Right sound track (Channel B)
9. AC Power Connector
Input 90V-260V, 50-60Hz AC, and the power consumption is less than 30VA.
II. Technique Specification
Non distortion max output: 8W + 8W
Distortion：<0.1%（1000Hz）
Bandwidth：40Hz-15000Hz ±1dB
Signal to noise ratio：>84dB
Input: balanced, XLR-3M/XLR-3F connector
1 - Common
2 - Audio+
3 - Audio-
Independence：>100Kohm
Output：unbalanced，ø6.35mm External earphone / speaker plug：
S - Common
T –Left sound track (Channel A)
R –Right sound track (Channel B)
Load impendence：4-32 ohm
Power Supply：AC 90-260V, 50-60Hz, <45VA
Working Temperature：0°- 50°C
Size：19” (W) x3.48” (H) x9.48” (D), 273mm x 88.5mm x 240mm
Weight：4Kg