Telkom Telmor MTX-1 Series User manual

I
O
-
7538
-
226
-
0
1
2713-2902-240
GZT TELKOM
-
TELMOR Sp. z o. o.,
ul. Mickiewicza 5/7, 80
-
425 Gdańsk
, Poland
tel. + 48 (58) 3823 349, e-mail: [e-mail], www.telmor.pl
HS
User Manual
Before installing, adjusting and using this product, please read the manual. It contains all essential
information for the user to make full use of the device, enable easy set up and guidelines to prevent possible
damage.
GZT TELKOM-TELMOR company makes every effort to ensure that delivered products are defect free.
However, during transportation, for reasons beyond the manufacturer's control, the device may be damaged. In
this case, please inform the manufacturer or distributor as soon as possible in order to solve the problem.
Mini Optical Transmitter MTX-1xxx may be stored for the period of 18 months from the date of
manufacture, without deterioration in technical parameters. Standard atmospheric conditions for storage
indicated in the the IEC 68.1 directive are as follow: temperature between 15-35°C, humidity between 25-70%,
atmospheric pressure between 860-1060hPa.
Products Characteristics
Mini Optical Transmitter MTX-1xxx is a modern device dedicated to the transmission of the RF signal over fiber
optic cable. The device is provided in a cast metal housing. The optical transmitter has a built-in RF connector
type "F" on the input, and SC / APC connector at the output. The optical transmitter is equipped with a LED
power indicator.
Application
Mini Optical Transmitter MTX-1xxx is dedicated to transmitting RF signal over fiber. Installed in the head-end,
allows the RF signal to be transmitted up to 20 km, and while distributed properly, to deliver the transmission to
multiple receivers.
Installation
Transmission with the signal level range of 81dBµV (DIN 45004B) should be provided to the RF input – type
„F”. Single mode fiber should be connected to the SC/APC optical output. Next, the powering of the device
should be switched on. The LED indicates the correct operation of the power supply – the voltage and current
provided is adequate.
Principles of safe operation:

Do not place other objects less than 5 cm away from the device for proper ventilation.

Do not cover the device with items such as newspapers, tablecloths, curtains, etc.

Do not place the device in the immediate vicinity of the heat source or open flame.

Do not place objects filled with liquid on or near the device.
MTX-1xxx
Mini Optical Transmitter

I
O
-
7538
-
226
-
0
1
2713-2902-240
GZT TELKOM
-
TELMOR Sp. z o. o.,
ul. Mickiewicza 5/7, 80
-
425 Gdańsk
, Poland
tel. + 48 (58) 3823 349, e-mail: [e-mail], www.telmor.pl
Technical parameters
Parameter MTX-1xxx
TYPE
Frequency range MHz 47-1006
Input level (DIN 45004B) dB
µ V 81
Flatness dB ±0,75
CSO (CENELEC 42 channels), OMI 4%
CTB (CENELEC 42 channels) OMI 4%
dBc
≥60
≥60
Optical output wavelength nm 1270-1610 step 20
Laser type / FP, DFB, CWDM
Optical output power dBm 0, 3, 6
Input impedance Ohm 75
Input adjustment dB ≥18dB (40MHz) – 1,5 dB/oct
OTHERS
Power Supply V/mA 12 / 250
Power consumption W 3
Type of Input / Output connector / F / SC/APC
Dimensions (W x H x D) with connectors mm 128 x 95 x 32
Weight without power supply Kg 0,28
Package / box
The crossed bin symbol on a product or its packaging means that it is subject to the
directive 2002/96/WE
.
According to this directive the electrical or electronic equipment may not be treated as
household waste but should be referred to a proper collection facility for recycling and recovery.
Proper handling of waste equipment helps prevent potential adverse effects on the natural
environment and human health
.
Contact your local authority for more details on the recycling and recovery of electronic
materials in this product