Tellur Selene TLL161071 User manual

Selene Bluetooth Speaker
TLL161071
User Manual

Product Presentation
Audio in
Volume/Previous Volume / Next
Play/Pause/Phone
LED light
SD card
Charging
port
Micro USB
Switching ON/OFF
Mic
charging
led light

1. BLUETOOTH MODE
1.2 Bluetooth version: V4.2. Supports HSP, HFP, A2DP, AVRCP
protocol, English voice reminder, the Bluetooth pairing name
"Selene".
1.2 Toggle the ON/OFF button to turn on the machine, then blue
color Bluetooth LED indicator will light on, with notification voice
to show you that Bluetooth is ready. BLUETOOTH LED light flash
by 100ms speed,use your mobile phone searching “Selene”
name, then connect and pair it. After connected, the blue LED
indicator light will be on and the paired notification sound will be
heard. When music is playing, the blue LED indicator light flash
slowly by a 1000ms speed. When smartphone paired this device
again, it will connect automatically.
1.2 When music played by Bluetooth mode, you can pick up your
incoming call, speaker will stop play music and will enter voice
call mode automatically.
1.2 When you disconnect the Bluetooth, there is notification
sound and the speaker will enter in searching mode.
1.2 Long press of the volume “+/-” button to turn up and down
the volume. Short press for Next / Previous.
2. MicroSD CARD MODE
2.1 Turn on the speaker, it will enter Bluetooth mode
automatically if it is without the microSD card inserted, when the
microSD card inserted, speaker will check and enter microSD
card play mode automatically. If the microSD card was inserted
on device, then when your turn on the speaker, it will enter the
microSD CARD mode directly.
2.2 When playing music, the blue LED light will be on and flash
slowly by 1000ms speed, when it was paused, LED light will stop
flashing.
2.3 Unplug the microSD card and enter the FM mode by default,
if you need other function please switch mode.2-3 seconds the
Call function button.

3 AUX IN MODE
3.1 Connect the speaker by 3.5mm stereo cable, manual switch
into AUX mode, then use your smartphone or other connected
device to play music.
3.2 When playing music, the blue LED light will be on and flash
slowly by 1000ms speed, when pause the speaker, the LED light
will stop flashing.
3.3 When playing music, long press of the volume “+/-” button
to turn up and down the volume. Short press for Next /
Previous.
3.4 Unplug the audio line speaker in the default AUX mode.
Switch to the wanted mode if you need other functions
4. FM MODE
4.1 When switch to FM mode, please insert the line-in cable as
the antenna. When listening the FM, you can press the play
button to enter the automatically searching channel mode.
4.2 After the searched channel is saved, short press the "+ -"
button to adjust the up and down radio, and long press the "+ -"
button to adjust the volume.
4.3 In radio mode, if you want to operate "Bluetooth" "AUX
function", please press the mode button to switch mode. The
SD card inserted is by default detected to enter the SD card
play.
5. CHARGING
5.1 Use the micro USB power cable to connect the speaker and
PC or 5V adaptor, then it will start to charge, the red LED
indicator will light on.
5.2 When charge is full, the red LED indicator will turn off.
6. LOW POWER PROTECTION
6.1 When battery power is lower than 3.3V over than 15s, there
is a warning sound, and then speaker will POWER OFF

Terms of use
7. BUTTONS FUNCTIONS
No. BUTTON
MODE
BLUETOOTH
TF CARD /
U DISK
AUX FM
1 PLAY/STOP/HA
NDS FREE CAL
L
SHORT PRESS
PLAY/STOP/H
A
NDS FREE
CALL
SHORT
PRESS
PLAY/STOP
SHORT
PRESS
PLAY/ST
OP
SHORT
PRESS
ENTER FM
SEARCHING
AUTOMATIC
A
LLY
2 NEXT/VOLUME
+
SHORT PRESS
NEXT/LONG
PRSS
VOLUME+
SHORT
PRESS
NEXT/
LONG PRSS
VOLUME+
SHORT
PRESS
I
NVALID
/
LONG
PRESS
VOLUME+
SHORT
PRESS
SWITCH
CHANNEL/
LONG PRESS
VOLUME +
3 PREVIOUS
/VOLUME-
SHORT PRESS
PREVIOUS/LO
N
G PRSS
VOLUME-
SHORT
PRESS
PREVIOUS
/LONG
PRESS
VOLUME-
LONG
PRESS
V
OLUME
-
SHORT
PRESS
SWITCH
CHANNEL/
LONG PRESS
VOLUME-
4 SWITCHING
MODE SHORT PRESS FOR SWITCHING MODE
5 POWER ON/OFF POWER ON/OFF

Disposal and recycling information
The crossed-out wheeled-bin symbol on your product, battery,
literature or packaging reminds you that all electronic products
and batteries must be taken to separate waste collection points
at the end of their working lives; they must not be disposed of in
the normal waste stream with household garbage.
It is the responsibility of the user to dispose of the equipment
using a designated collection point or service for separate
recycling of waste electrical and electronic equipment (WEEE)
and batteries according to local laws.
Proper collection and recycling of your equipment helps ensure
EEE waste is recycled in a manner that conserves valuable
materials and protects human health and the environment,
improper handling, accidental breakage, damage, and/or
improper recycling at the end of its life may be harmful for
health and environment.