Teltonika FM3602 User manual

FM3602/FM3612 User Manual
V0.7

2
Table of contents
1INTRODUCTION ..................................................................................................................... 6
1.1 ATTENTION............................................................................................................................ 6
1.2 INSTRUCTIONS OF SAFETY ......................................................................................................... 6
1.3 LEGAL NOTICE........................................................................................................................ 7
1.4 ABOUT DOCUMENT ................................................................................................................. 7
2BASIC DESCRIPTION ............................................................................................................... 8
2.1 PACKAGE CONTENTS ................................................................................................................ 8
2.2 BASIC CHARACTERISTICS ........................................................................................................... 8
2.3 TECHNICAL FEATURE .............................................................................................................. 10
2.4 ELECTRICAL CHARACTERISTICS.................................................................................................. 11
2.5 ABSOLUTE MAXIMUM RATINGS............................................................................................... 13
2.6 TECHNICAL INFORMATION ABOUT INTERNAL BATTERY................................................................... 13
3CONNECTION, PINOUT, ACCESSORIES.................................................................................. 14
3.1 HOW TO INSERT SIM CARD AND ATTACH BATTERY INTO FM3602/FM3612 DEVICE:........................ 14
3.2 INSTALLING FM3602/FM3612 DRIVERS ................................................................................. 16
3.3 NAVIGATE LED..................................................................................................................... 17
3.4 MODEM LED....................................................................................................................... 17
3.5 STATUS LED .............................................................................ERROR!BOOKMARK NOT DEFINED.
3.6 FM3602/FM3612 SOCKET 26* ......................................................................................... 18
3.7 USB................................................................................................................................... 19
3.8 ACCESSORIES........................................................................................................................ 19
4FIRMWARE .......................................................................................................................... 24
5OPERATIONAL BASICS.......................................................................................................... 25
5.1 OPERATIONAL PRINCIPALS....................................................................................................... 25
5.2 SLEEP MODES....................................................................................................................... 26
5.2.1 Sleep mode ............................................................................................................. 26
5.2.2 Deep Sleep mode .................................................................................................... 26
5.3 VIRTUAL ODOMETER.............................................................................................................. 27
5.4 FEATURES............................................................................................................................ 27
5.4.1 Scenarios ................................................................................................................ 27
5.4.2 Trip.......................................................................................................................... 28
5.4.3 Geofencing.............................................................................................................. 29
5.4.4 iButton list .............................................................................................................. 29
5.5 CONFIGURATION.............................................................................................................. 29
5.6 CONFIGURATOR.................................................................................................................... 29
5.7 READ RECORDS..................................................................................................................... 32
5.8 SYSTEM SETTINGS.................................................................................................................. 33
5.9 RECORDS SETTINGS................................................................................................................ 35
5.10 GSM SETTINGS,GPRS PART................................................................................................... 35
5.11 GSM SETTINGS,SMS PART .................................................................................................... 36
5.12 GSM SETTINGS,OPERATOR LIST .............................................................................................. 37
5.13 DATA ACQUISITION MODE SETTINGS ........................................................................................ 37
5.14 FEATURES SETTINGS............................................................................................................... 42
5.14.1 Scenarios settings................................................................................................... 42
5.14.2 Trip settings ............................................................................................................ 43
5.14.3 Geofencing settings ................................................................................................ 44
5.14.4 SMS events ............................................................................................................. 47
5.15 I/O SETTINGS ....................................................................................................................... 52
5.15.1 Monitoring.............................................................................................................. 57
5.15.2 Event Generating.................................................................................................... 57
5.15.3 Hysteresis ............................................................................................................... 58

3
6SMS COMMAND LIST ........................................................................................................... 58
6.1 SMS COMMAND LIST............................................................................................................. 58
6.1.1 getstatus................................................................................................................. 60
6.1.2 getweektime........................................................................................................... 60
6.1.3 getops..................................................................................................................... 60
6.1.4 getcfgtime .............................................................................................................. 60
6.1.5 getgps..................................................................................................................... 61
6.1.6 ggps ........................................................................................................................ 61
6.1.7 getver ..................................................................................................................... 61
6.1.8 getinfo .................................................................................................................... 62
6.1.9 getio........................................................................................................................ 62
6.1.10 readio #................................................................................................................... 62
6.1.11 setdigout ## Y1 Y2 .................................................................................................. 63
6.1.12 getparam #### ....................................................................................................... 63
6.1.13 setparam ####........................................................................................................ 63
6.1.13. getparam 1271 X/212 X ......................................................................................... 63
6.1.14. setparam 1271 X/212 X .......................................................................................... 63
6.1.15 readops #................................................................................................................ 63
6.1.16 flush #,#,#,#,#,#,# ................................................................................................... 63
6.1.17 sn # ......................................................................................................................... 64
6.1.18 banlist..................................................................................................................... 64
6.1.19 crashlog .................................................................................................................. 64
6.1.20 lvcangetprog........................................................................................................... 64
6.1.21 lvcansetprog # ........................................................................................................ 64
6.1.22 lvcangetinfo............................................................................................................ 64
7DEBUG MODE ...................................................................................................................... 65
8PARAMETER LIST ................................................................................................................. 65
8.1 PARAMETERS VALUE TYPES...................................................................................................... 65
8.2 SYSTEM PARAMETERS ............................................................................................................ 66
8.2.1 Sleep Mode (ID=1000) ............................................................................................ 66
8.2.2 Sleep timeout (ID=200) ........................................................................................... 66
8.2.3 Analog Input value range (ID=1001) ...................................................................... 66
8.2.4 Stop Detection Source (ID=1002)............................................................................ 66
8.2.5 Static Navigation (ID=1003) ................................................................................... 66
8.2.6 Ignition Source (ID=1004) ....................................................................................... 67
8.2.7 Ignition Detection(ID=1008) ................................................................................... 67
8.2.8 Ignition Detection Timeout(ID=1009) ..................................................................... 67
8.2.9 GNSS FIX Timeout for Time Synchronization via NTP (ID=1007)............................. 67
8.2.10 Saving/Sending without time synchronization (ID=201) ........................................ 68
8.2.11 GNSS System (ID=202) ............................................................................................ 68
8.3 RECORDS PARAMETERS .......................................................................................................... 68
8.3.1 Sorting (ID=1010) ................................................................................................... 68
8.3.2 Active Data Link Timeout (ID=1011)....................................................................... 68
8.3.3 Server Response Timeout (ID=1012)....................................................................... 68
8.4 GSM PARAMETERS ............................................................................................................... 69
8.4.1 GPRS content activation (ID=1240) ........................................................................ 69
8.4.2 APN Name (ID=1242).............................................................................................. 69
8.4.3 APN username (ID=1243) ....................................................................................... 69
8.4.4 APN Password (ID=1244)........................................................................................ 69
8.4.5 Domain (ID=1245) .................................................................................................. 69
8.4.6 Target Server Port (ID=1246).................................................................................. 70
8.4.7 Protocol (ID=1247).................................................................................................. 70
8.4.8 Use 2G only (ID=1248) ........................................................................................... 70
8.4.9 SMS Login (ID=1252) .............................................................................................. 70
8.4.10 SMS Password (ID=1253)........................................................................................ 70
8.4.11 SMS Time Zone (ID=1254)....................................................................................... 70

4
8.4.12 SMS data sending settings (ID=1250)..................................................................... 71
8.4.13 SMS Data send week time schedule (ID=1273) ...................................................... 71
8.4.14 Authorized phone numbers (ID=1260-1269) .......................................................... 71
8.4.15 SMS Event PreDefined Numbers (ID=5000-5009)................................................... 71
8.4.16 Operator List (ID=1271 X) ...................................................................................... 71
8.5 DATA ACQUISITION MODES PARAMETERS.................................................................................. 72
8.5.1 Home Network GSM operator code “Vehicle on STOP” parameters ...................... 72
8.5.2 Home Network GSM operator code “Vehicle MOVING” parameters..................... 73
8.5.3 Roaming Network GSM operator code “Vehicle on STOP” parameters ................. 74
8.5.4 Roaming Network GSM operator code “Vehicle MOVING” parameters ................ 75
READ CHAPTER 8.5.1.4...................................................................................................................... 77
8.5.5 Unknown Network GSM operator code “Vehicle on STOP” parameters ................ 77
8.5.6 Unknown Network GSM operator code “Vehicle MOVING” parameters ............... 77
8.6 FEATURES PARAMETERS ......................................................................................................... 79
8.6.1 Green Driving scenario (ID=1600)........................................................................... 79
8.6.2 Max Acceleration Force (ID=1602) ......................................................................... 79
8.6.3 Max Braking Force (ID=1603) ................................................................................. 79
8.6.4 Max Cornering Force (ID=1604) ............................................................................. 79
8.6.5 Max allowed Speed (ID=1605)................................................................................ 80
8.6.6 OverSpeeding scenario (ID=1601) .......................................................................... 80
8.6.7 Jamming detection scenario (ID=1606) .................................................................. 80
8.6.8 Immobilizer scenario (ID=1607).............................................................................. 80
8.6.9 Immobilizer ignition timeout(ID=1609) .................................................................. 80
8.6.10 iButton list checking scenario (ID=1608) ................................................................ 80
8.6.11 Excessive Idling detection (ID=1610) ...................................................................... 81
8.6.12 Time to stationary (ID=1611).................................................................................. 81
8.6.13 Time to movement (ID=1612)................................................................................. 81
8.6.14 Trip (ID=1280)......................................................................................................... 81
8.6.15 Start Speed (ID=1281)............................................................................................. 81
8.6.16 Ignition Off Timeout (ID=1282)............................................................................... 81
8.6.17 Trip distance mode (ID=1283) ................................................................................ 82
8.6.18 Enable odometer value setting (ID=1284) .............................................................. 82
8.6.19 Continuous odometer value (ID=1285)................................................................... 82
8.6.20 Remember iButton ID, while trip is detected(ID=1286).......................................... 82
8.6.21 Geofencing.............................................................................................................. 82
8.6.22 AutoGeofencing...................................................................................................... 84
8.6.23 iButton List (ID=7000-7499).................................................................................... 85
8.7 I/O PARAMETERS.................................................................................................................. 85
8.7.1 I/O#1 Priority (ID=2000) ......................................................................................... 85
8.7.2 I/O#1 High level (ID=2001) ..................................................................................... 85
8.7.3 I/O#1 Low level (ID=2002) ...................................................................................... 86
8.7.4 I/O#1 event generation type (ID=2003).................................................................. 86
8.7.5 I/O#1 averaging length (ID=2004).......................................................................... 86
8.8 LV-CAN FEATURES ............................................................................................................... 87
8.8.1 CAN Mode............................................................................................................... 87
8.8.2 I\O Send as 0 when ignition is off ........................................................................... 88
8.9 SMS EVENT CONFIGURATION .................................................................................................. 88
8.9.1 I/O#1 element SMS event configuration (ID=5100)................................................ 88
9FM3602/FM3612 WITH LIGHT VEHICLES CAN ADAPTER LV-CAN200/ALL-CAN300 ............... 90
9.1 PURPOSE OF LIGHT VEHICLES CAN ADAPTER LV-CAN200/ALL-CAN300 ...................................... 90
9.2 LV-CAN200/ALL-CAN300 PROGRAM NUMBER SELECTION........................................................ 91
9.2.1 LV-CAN200/ALL-CAN300 program number configuration via SMS command ....... 91
9.2.2 Selecting LV-CAN200/ALL-CAN300 program number manually............................. 91
9.2.3 Program number logic change ............................................................................... 92
9.3 CONNECTING FM3602/FM3612 WITH LIGHT VEHICLES CAN ADAPTER ........................................ 93
9.4 CONNECTING LIGHT VEHICLES CAN ADAPTER............................................................................. 93
9.5 FM3602/FM3612 CONFIGURATION...................................................................................... 94

5
9.5.1 SCAN function......................................................................................................... 94
9.5.2 Offline configuration .............................................................................................. 95
9.6 PARAMETERS ID ................................................................................................................... 96
9.7 SMS CONFIGURATION......................................................................................................... 102
9.8 CAN PROGRAM NUMBER REQUEST BY SMS............................................................................ 104
9.9 GET LV-CAN INFO BY SMS.................................................................................................. 104
9.10 REFERENCES....................................................................................................................... 104
10 MOUNTING RECOMMENDATIONS ................................................................................ 105
10.1 CONNECTING WIRES............................................................................................................ 105
10.2 CONNECTING POWER SOURCE............................................................................................... 105
10.3 CONNECTING IGNITION WIRE................................................................................................ 105
10.4 CONNECTING GROUND WIRE................................................................................................ 105
10.5 MODULE INSTALLATION........................................................................................................ 106
CHANGE LOG............................................................................................................................. 107

6
1INTRODUCTION
1.1 Attention
Do not disassemble the device. If the device is
damaged, the power supply cables are not isolated or
the isolation is damaged, before unplugging the power
supply, do not touch the device.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
The device must be connected only by qualified
personnel.
The device must be firmly fastened in the predefined
location.
The programming must be performed using a second
class PC (with autonomic power supply).
The device is susceptible to water and humidity.
Any installation and/or handling during a lightning
storm are prohibited.
FM3602/FM3612 has USB interface;
Please use cables provided with FM3602/FM3612
device.
Teltonika is not responsible for any harm caused by
using wrong cables for PC <-> FM3602/FM3612
connection.
1.2 Instructions of safety
This chapter contains information on how to operate FM3602/FM3612 safely. By following
these requirements and recommendations, you will avoid dangerous situations. You must read
these instructions carefully and follow them strictly before operating the device!
This device uses SELV limited power source. The device could be supplied with 10 V...30 V
DC power supply. The nominal voltage is 12 V DC. The allowed range of voltage is 10 V...30 V DC.
To avoid mechanical damage, it is advised to transport the FM3602/FM3612 device in an
impact-proof package. Before usage, the device should be placed so that its LED indicators are
visible, which show the status of operation the device is in.
When connecting the connection (2x6) cables to the vehicle, the appropriate jumpers of
the power supply of the vehicle should be disconnected.

7
Before dismounting the device from the vehicle, the 2x6 connection must be disconnected.
The device is designed to be mounted in a zone of limited access, which is inaccessible for
the operator. All related devices must meet the requirements of standard EN 60950-1.
The device FM3602/FM3612 is not designed as a navigational device for boats.
1.3 Legal Notice
Copyright © 2017 Teltonika. All rights reserved. Reproduction, transfer, distribution or
storage of part or all of the contents in this document in any form without the prior written
permission of Teltonika is prohibited.
Other products and company names mentioned here may be trademarks or trade names
of their respective owners.
The manufacturer reserves the right to make changes and/or improvements at any time in
design, functionality, parameters and electrical characteristics without any prior notice and
without incurring obligations.
1.4 About document
This document contains information about the architecture, possibilities, mechanical
characteristics, and configuration of the FM3602/FM3612 device.
Acronyms and terms used in document
PC –Personal Computer.
GPRS –General Packet Radio Service
GNSS –Global Positioning System
GSM –Global System for Mobile Communications
SMS –Short Message Service
AC/DC –Alternating Current/Direct Current
I/O –Input/Output
Record –AVL data stored in FM3602/FM3612 memory. AVL data contains GNSS and I/O
information
AVL packet –data packet that has been sent to server during data transmission. AVL packet
contains from 1 to 50 records.

8
2BASIC DESCRIPTION
FM3602/FM3612 is a terminal with GPS/GLONASS and GSM/3G connectivity with backup
battery, which is able to collect device coordinates and other useful data and transfer them via
the GSM/3G network. This device is perfectly suitable for applications where location
acquirement of remote objects is needed. It is important to mention that FM3602/FM3612 has
additional inputs and outputs, which let you control and monitor other devices on remote
objects. FM3602/FM3612 also has a USB port for device status log output and configuration.
2.1 Package contents
1
The FM3602/FM3612 device is supplied to the customer in a cardboard box containing all
the equipment that is necessary for operation. The package contains:
FM3602/FM3612 device;
Input and output power supply cable with a 2x6 connection pins;
USB cable;
Li-Po battery 3.7, 170mAh
2.2 Basic characteristics
FM3602 Interface features:
•Power supply: 10 ÷ 30V;
•2 digital inputs;
•2 analog/digital input;
•2 open collector Digital output;
•1 Wire interface:
oTemperature sensor
oiButton
•Internal backup battery;
•2 Status LEDs:
oNavigate
oStatus
•Internal USB port;
•External GSM/GPRS/3G antenna;
•External GNSS antenna;
•Interface for LVCAN;
FM3612 Interface features:
•Power supply: 10 ÷ 30V;
•2 digital inputs;
•2 analog/digital input;
•2 open collector Digital output;
•1 Wire interface:
oTemperature sensor
oiButton
1
Package content depends on Order Code, and can be customized by customer needs.

9
•Internal backup battery;
•2 Status LEDs:
oNavigate
oStatus
•Internal USB port;
•Internal GSM/GPRS/3G antenna;
•Internal GNSS antenna;
•Interface for LVCAN;
Hardware features:
•Cortex®-M3 processor;
•8 Mbit internal Flash memory;
•Built-in accelerometer sensor.
GSM / GPRS / 3G features:
•UMTS/HSPA+, GSM/GPRS/EDGE module
•UMTS/HSPA+ bands depending on module:
oUC20-G 850/900/1700/1900/2100 MHz
•HSUPA rate up to 5.76 Mbps, HSDPA rates up to 14,4 Mbps
•UMTS Uplink/Downlink up to 384 kbps
•EDGE Uplink/Downlink up to 236.8 kbps
•GPRS and EDGE class 12;
•SMS (text, data).
GNSS features:
•TG1000 engine for GNSS, GLONASS, Galileo and QZSS;
•33channel GPS/GLONASS receiver;
•Protocol NMEA-0183: GGA, GGL, GSA, GSV, RMC, VTG;
•-165 dBm Tracking Sensitivity
Special features:
•Any element event triggers (external sensor, input, speed, temperature, etc.);
•Highly configurable data acquisition and sending;
•Multiple Geo-fence areas;
•Sleep mode;
•Deep sleep mode;
•Configurable scenarios available;
•Real-time process monitoring;
•Authorized number list for remote access;
•Firmware update over GPRS or USB port;
•Configuration update over GPRS, SMS or USB port;
•TCP/IP or UDP/IP protocol support;
•Up to 3854 records storing;
•Radio frequency jamming detection.
•Records exporting using USB;

10
•Offline working mode;
Overvoltage protection
Description
Voltage
Duration
Normal operation
10-30V
Unlimited
Protection turns on, device turns off.
34V
Unlimited
Maximum voltage
<70V
Unlimited
Maximum voltage impulse
90V
5 milliseconds
2.3 Technical feature
Part name
Physical specification
Technical details
System LED
LED
Power supply 10...30 V DC
2W Max
Energy consumption:
GPRS: 150 mA r.m.s Max.,
Nominal: average 50 mA r.m.s,
GNSS Sleep2: average 18 mA
Deep Sleep: average less than 5 mA3
Battery charge current: 100 mA
Rated input current: 250 mA Max.
Operation temperature:
-25⁰C ... +55⁰C
Storage temperature:
-40⁰C ... +70⁰C
Storage relative humidity 5 ... 95 % (no
condensation)
Internal fuse: 3A, 125V
Navigation LED
LED
Socket 2x6
Tyco Micro MATE-N-LOK™
4-794628-0 or similar
USB
Micro USB socket
Table 1. FM3602/FM3612 specifications
2
When in Sleep mode, FM unit turns OFF GNSS module.
3
When in Deep Sleep mode no data storing and sending is activated.

11
Figure 1. FM3602/FM3612 view & dimensions (tolerance ±2mm)
2.4 Electrical characteristics
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage:
Supply Voltage (Recommended Operating Conditions)
10
30
V
Digital Output (Open Drain grade):
Drain current (Digital Output OFF)
120
μA
Drain current (Digital Output ON,
Recommended Operating Conditions)
1.0
A
Static Drain-Source resistance (Digital
Output ON)
300
mΩ
Digital Input:
Input resistance (DIN1,)
15
kΩ
Input resistance (DIN2, DIN3)
20
kΩ
Input resistance (DIN4)
120
kΩ
Input Voltage (Recommended Operating
Conditions)
0
Supply
voltage
V

12
Input Voltage threshold (DIN1)
7.5
V
Input Voltage threshold (DIN2)
2.5
V
Input Voltage threshold (DIN3)
2.5
V
Input Voltage threshold (DIN4)
2.5
V
Analog Input:
Input Voltage (Recommended Operating
Conditions), Range1
0
10
V
Input resistance, Range1
120
kΩ
Measurement error
0.47
%
Additional error
±17.3
mV
Input Voltage (Recommended Operating
Conditions) Range2
0
30
V
Input resistance, Range2
150
kΩ
Measurement error
1.01
%
Additional error
±139
0
mV

13
Output Supply Voltage 1-Wire:
Supply Voltage
3.3
3.6
V
Output inner resistance
7
Ω
Output current (Uout > 3.0V)
30
mA
Short circuit current (Uout = 0)
130
mA
2.5 Absolute Maximum Ratings
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage (Absolute Maximum Ratings)
-32
32
V
Drain-Source clamp threshold voltage (Absolute
Maximum Ratings), (Idrain = 2mA)
36
V
Digital Input Voltage (Absolute Maximum Ratings)
-32
32
V
Analog Input Voltage (Absolute Maximum Ratings)
-32
32
V
2.6 Technical Information about internal battery
FM3602/FM3612 internal battery is used for detecting external voltage disconnection.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Battery Disposal instructions:
Battery should not be disposed of with general household waste.
Bring damaged or worn-out batteries to your local recycling center or dispose
them to battery recycle bin found in stores.
Internal back-up battery
Battery voltage V
Nominal capacity (mAh)
Power(Wh)
Charging
temperature
range (◦C)
Li-Polymer rechargeable
battery
3,7
170
0.64 –0.66
0 –45

14
3CONNECTION, PINOUT, ACCESSORIES
3.1 How to insert SIM card and attach battery into FM3602/FM3612 device:

Gently open FM3602/FM3612 case using screwdrivers

15

Remove FM3602/FM3612 case

Insert SIM card as shown

Attach battery

Attach top housing cover

16

Device is ready
3.2 Installing FM3602/FM3612 drivers
Software requirements:
• Operating system 32-bit and 64-bit: Windows XP with SP3 or later, Windows Vista,
Windows 7/8/8.1/10.
• MS .NET Framework V3.5 or later (http://www.microsoft.com).
Drivers:
Please download Virtual COM Port drivers from Teltonika website:
http://avl1.teltonika.lt/downloads/FM36/vcpdriver_v1.3.1_setup.zip
Installing drivers:
Extract and run VCPDriver_V1.3.1_Setup.exe. This driver is used to detect FM3602/FM3612
device connected to the computer. Click ‘Next’ in driver installation window (figures below):
Figure 2. Driver installation window
This will launch device driver installation wizard. In the following window click ‘Next’
button again:

17
Figure 3. Driver installation window
Setup will continue installing drivers and will display a window about successful process at
the end. Click ‘Finish’ to complete setup:
Figure 4. Driver installation window
You have now installed drivers for FM3602/FM3612 device successfully.
3.3 Navigate LED
Behavior
Meaning
Permanently switched on
GNSS signal is not received
Blinking every second
Normal mode, GNSS is working
Off
GNSS is turned off because:
•Sleep mode
•Deep sleep mode
Or
•GNSS antenna short circuited
3.4 Status LED
Behavior
Meaning
Blinking every second
Normal mode
Blinking every 2 seconds
Deep sleep mode
Blinking fast for a short time
Modem activity
Blinking fast constantly
Boot mode
Off
•Device is not working
Or
•Device firmware being flashed

18
3.5 FM3602/FM3612 Socket 26*
Figure 5. 26 socket pinout
Figure 6. FM3602/FM3612 sticker
Pin
Nr.
Pin Name
Description
1
VCC (10÷30) V DC (+)
Power supply for module. Power supply range
(10÷30)V DC
Energy consumption: GPRS: 150 mA r.m.s Max.
2
DIN 4 / AIN 1
Digital input, channel / Analog input 0-30 V range
3
DIN 3 / AIN 2
Digital input, channel / Analog input 0-30 V range
4
DIN 2
Digital input, channel 2
5
DIN 1
Digital input, channel 1
6
INPUT 6
LV-CAN/ALL-CAN interface input 6 line
7
GND (-)
Ground pin.
8
OUT 1
Digital output. Channel 1. Open collector output.
Max. 150mA.
9
OUT 2
Digital output. Channel 1. Open collector output.
Max. 150mA.
Input 6
6
12
INPUT 5
DIN 1
5
11
1W Data
DIN 2
4
10
1W POWER
AIN 2
3
9
OUT 2
AIN 1
2
8
OUT 1
VCC 1030 DC (+)
1
7
GND(-)

19
10
1WIRE POWER
Power supply pin for Dallas 1-Wire® devices
11
1WIRE DATA
Data channel for Dallas 1-Wire® devices
12
INPUT 5
LV-CAN/ALL-CAN interface input 5 line
Table 2. Socket 2x6 pinout description.
3.6 USB
Micro USB connector
Figure 7. Micro USB type B connector
FM3602/FM3612 connected to PC creates an STM Virtual COM Port, which can be used as
a system port (to flash firmware and configure the device):
Figure 8. COM-Ports
3.7 Accessories
1 –Wire devices for FM36X2
One of the realized features is 1-Wire® data protocol, which enables connection of
thermometer (DS1820, DS18S20 and DS18B20) and I-Button type: DS1990A (Figures 9 and 10
show FM3602/FM3612 and 1-wire® device connection schemes).

20
Left row of pins
1
3
4
1
2
2
J1
J2
J3
U1
Right row of pins
1W.PWR
(FM3602/FM3612 –
pin5)
1
1W. Data
(FM3602/FM3612 –
pin4)
2
1
Vpp (+5 Volts DC) –
power source for
external digital
sensor
GND
(FM3602/FM3612 –
pin7)
3
2
Output from external
digital sensor
Digital Input
4
Figure 9. Digital thermometer DS1820 and TTJ100 connection scheme
Figure 10. I-Button DS1990A connection scheme
Note: Teltonika does not provide any additional equipment like panic
buttons, door sensors or others.