Tempest KIRIN User manual

KIRIN
USER MANUAL

Switch between Bluetooth mode and USB mode
Fn + P :
Instructions to pair Tempest Kirin with Bluetooth devices:
Ensure that the Tempest Kirin is turned on (Switch is on the back)
Switch to Bluetooth Mode (Fn + P)
Select the preset to save the Bluetooth mode to
Press and hold Fn + the 'P' key for 3 seconds. (The 'P' key will start flashing)
Search for the Tempest Kirin on your Bluetooth device
Upon successful connection, the Caps and Scroll lock will stop flashing
You are able to store up to 3 devices when selecting the preset
(Fn + Q, Fn + W, Fn + E)
The Tempest Kirin supports simultaneous storage of up to 3 Bluetooth connection information. You will be able to switch between devices at any point
of time just by switching to the correct preset.
BLUETOOTH
1.
2.
3.
Fn + Q, Fn + W, Fn + Ea.
4.
5.
6.
Please charge your Tempest Kirin before using it for the first time to prevent any battery issue. The Tempest Kirin uses 1850 mAh battery which charges
via 5V 1A or through the USB cable. The charge time for the Tempest Kirin is about 4-5 hours after, it will last for 20-60 hours (Depending on LED
brightness). In Bluetooth mode, if there is no response or transmission in 1 minute, the keyboard will enter Standby mode to save battery.
Any button pressed will disable the Standby mode.
CHARGING INSTRUCTIONS
Tempest Kirin TKL Keyboard
USB C to USB 2.0
Tempest Keycap Remover
1
1
1
PACKAGING CONTENT

LAYOUT
KEY FUNCTIONS
Fn + F1
Fn + F2
Fn + F3
Fn + F4
Fn + F5
Fn + F6
My Computer
Web Browser
e-Mail
Music Player
Previous Track
Next Track
Fn + F7
Fn + F8
Fn + F9
Fn + F10
Fn + F11
Fn + F12
Start / Pause Track
Stop Track
Volume Up
Volume Down
Mute
Calculator
Fn +
Fn + Left Ctrl
Win Lock Windows Key
Swap left Ctrl and Caps Lock
Fn + Space Factory Reset
(Hold the keys for 3 seconds. After
which, the keyboard will be fully
resetted back to factory settings)
Fn + A Swap to Windows Mode
(default)
Fn + S Swap to MAC Mode
Fn + 1
Fn + 2
Fn + 3
Fn + 4
Respiration/ Perpetual
3-Cycle Aurora
2-Cycle Aurora
Ripple / Cluster
BACKLIGHT SETTING
Fn + 5
Fn + 6
Fn + 7
Linear / Wave / Pulse
Sonar / Echo
Random
Fn +
Fn +
Fn +
Fn +
Increase Brightness
Decrease Brightness
Increase Frequency
Decrease Frequency
Esc
~
`
!
1
Q W E R T Y U I O P
A S D F G H J K L
@
2
#
3
$
4
%
5
^
6
&
7
*
8
(
9
)
0
_
-
+
=
{
[
:
;
“
‘
}
]
|
\
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F 11
Backspace
F12
Enter
Tab
CapsLock
Z X C V B N M <
,
>
.
?
/ShiftShift
Ctrl Alt Alt Fn Ctrl
Macro / Normal Mode Shortcuts
Left CTRL / CAPS switching
WIN Key Lock Macro Keys Factory Reset
Bluetooth
WIN Mode
MAC Mode

Complies with
IMDA Standards
DA 108331
CERTIFICATIONS:
DESIGNED IN SINGAPORE
HTTPS://TEMPEST.SG/
QR CODE:
URL:
GENERAL
364 x 137 x 39mm ± 2
ANSI US
SECC + ABS
Dip-dyed laser engraved PBT keycaps
Cherry MX
5 V
12 Months
Product Dimension
Key Arrangement
Body Material
Keycap Material
Switch
Voltage
Warranty
MACRO RECORDING
Press FN + Tab to change to Macro mode.
Press FN + Z/X/C to select a Key to save to.
Press FN + Z/X/C and hold for 3 seconds to initiate macro recording.
The LED lights on the top right of your keyboard will start blinking.
The LED lights will now stop blinking and your macro is now recorded.
Register your keystrokes at this point of time. (Max: 32 keystrokes registered)
Press FN + Z/X/C and hold for 3 seconds again.
1.
2.
3.
4.
5.
6. To overwrite a Key, start from step 2 again.
MACRO PLAYBACK
Press FN + Tab to change to Macro mode.
Press Z/X/C to activate your recorded macro.
To change back to normal mode, press FN + Tab again.
1.
2.
3.