Tenways YT18SF-2H-S User manual

energized urban ride
Power Bank Manual

Multi-language
Find your language by scanning the QR code
Important Notes:
The battery volume shown on the e-bike's display is ONLY the estimated value based on
the battery's voltage and the motor's current output power. The battery volume shown
on the e-bike's display may experience slight uctuations when riding your e-bike with
the power bank connected.
The power bank's remaining volume is only shown by the power indicator near the power
button.
Find your
language.

Product overview
Parts list:
Power bank ×1 Six-core to DC adapter (coiled wire) x 1
User manual x 1 Six-core to DC adapter (straight wire) x 1
Waterproof bag x 1 USB-A to Type-C adapter x 1
USB Type-C port
USB output port
Power button
Six-core port
Power indicator

Operating instructions
Power on
Press the power button once. The power indicator will light up, and the
power bank will enter the power-on state.
Power off
When the power bank is on, press the power button for 3 seconds to power
off the power bank. The power bank will automatically shut down if it is not
used for 20 minutes.
Power indicator
As shown in the following table, the 3-bar power indicator indicates how
much power remains in the power bank.
Check remaining power
Press the power button. The power indicator becomes solid on and
indicates the remaining power.
Ports
Six-core port: output
USB output port: 5 V 2.1 A output
USB Type-C port: PD 40 W bidirectional (input/output) port
Power indicator One bar Two bars Three bars
Power < 30% 30% - 65% 65% - 100%
Port Applicable devices
USB output port Most mobile phones, digital devices, or devices
with an input of DC 5 V, 2.1 A
USB Type-C port Most mobile phones, digital devices or devices
with an input of at most PD 40 W
Six-core port Li-ion batteries (10 series) on e-bikes operating at 36 V

Charge the power bank
Notes:
1. The charging time of the power bank depends on the output power of the charger.
2. If the power bank cannot be charged, check if the charging cable is connected
correctly and if it is compatible with the port.
3. We recommend using a high-quality charger to charge the power bank.
4. Due to the conversion efciency, the actual charging capacity may differ from the
rated capacity.
Use a USB-A to Type-C Cable to charge the power bank.
Before charging, turn on the product. Connect the USB-A to Type –C cable that
comes with the product to the USB Type-C port to charge the product. The
product supports PD 40W, 5V/2.1A, and 21V/3A fast chargers, which need to be
purchased separately.
USB Type-C port
Power on
USB A to Type-C

Charge a digital device
Charge the battery on an e-bike
Please select the appropriate power cable port (USB Type-C port or USB output
port) to charge your device using the product. After you press the power
button on the power bank, the battery indicator will stay on. When the battery
indicator ashes, it indicates that your device is being charged.
Use the six-core DC adapter that comes with the product to connect the
charging port of the e-bike to the six-core port of the power bank. Press the
power button, the battery indicator will stay on. When the battery indicator
ashes, it indicates that the e-bike is being charged.
Note:
The power bank can only charge 36 V Li-ion batteries.
6-core output port
Six-core DC adapter
Type-C Port or USB Port

Model Power Bank YT18SF-2H-S
Capacity 180 Wh
6-core output port Output DC 42 V 1.5 A
USB port Output DC 5 V 2.1 A
USB Type-C port Output PD 40 W
USB Type-C port Input PD 40 W
Power indicator Three-bar LED (white)
Applicable to
Most mobile phones, digital devices or other devices
with an input of at most 5 V 2.1 A, 36 V lithium
batteries on e-bikes
Dimensions (only the
power bank) 212 × 138 × 57 mm
Weight (only the
power bank) 1250 g
State of charge
Safety and precautions
Specications
When the power bank is used to charge another device:
1. The power indicator is on, indicating the remaining power.
2. When the power indicator ashes, the power bank is working.
When this power bank is being charged:
1. The power indicator ashes, indicating the current power by the number
of bars.
2. When the power indicator becomes off, charging completes.
1. We do not recommend using the power bank in heavy rain.
2. Do not drop, disassemble or puncture the power bank without permission.
3. Do not expose the power bank to re, high temperatures, and water.
4. We recommend using a high-quality charger to charge the power bank. Stop
using the power bank if any abnormality is discovered.
5. Warning: Failure to follow these safety instructions may result in re, electric
shock, damage or other injuries.
6. With high-quality Li-ion cells, this power bank is safe to use in accordance
with all safety instructions.

Waterproof bag
Velcro strap
Zipper
The power bank can be installed and connected to an e-bike through a
waterproof bag.
Charging cable & USB cable
Velcro straps
Discharge port

Installation on a TENWAYS e-bike
1. Installation on CGO600 e-bike:
1. Remove the water bottle screws circled in red in the gure (the water
bottle holder or air pump (if any) should be removed), ensuring adequate
space for the installation;
2. Fix the power bank to the lower part of the front triangle of the frame
with the Velcro straps. Connect the power bank to the discharge port of the
bike battery using a suitable discharging cable.
3. Press the power button once. The power indicator will light up, and the
power bank will charge the e-bike.
Charging port of e-bike
Velcro strap
Discharge cable
Charging port

2. Installation on CGO800S e-bike:
1. Fix the power bank to the lower part of the front triangle of the frame
with the Velcro straps as shown in the gure. Connect the power bank to
the discharge port of the bike battery using a suitable discharging cable.
2. Press the power button once. The power indicator will light up, and the
power bank will charge the e-bike.
Charging port of e-bike
Velcro strap
Discharge cable
Charging port

Notes:
1. The above power bank installation diagram shows just one of the installation methods.
2. The power bank can be xed on the e-bike by forming a triangular position using three
Velcro straps. The length of the discharging cable should ensure easy connection to the
charging port of the bike battery without hindering riding.

www.tenways.com