TerraWave Solutions T58150Y13602 User manual

TerraWave Solutions®5.7-5.85 GHz 15 dBi Yagi Antenna with RPTNC Plug Connector
TerraWave’s 15 dBi directional yagi antenna is a rugged, easy to install, high performance
directional antenna for deploying point-to-point wireless bridges. It can also be used as an access
point antenna in long narrow coverage environments like a hallway. Includes an RPTNC plug with a
36” pigtail and a mast mount. Every TerraWave antenna is covered by the Company’s two-year
TerraNet warranty program. Visit www.terrawave.com for additional information.
Specifications
Model T58150Y13602
Frequency Range 5725 - 5850 MHz
Bandwidth 125 MHz
Gain 15 dBi
Vertical Beamwidth 24°
Horizontal Beamwidth 25°
VSWR -/=1.5
Nominal Impedance 50 Ohms
Polarization Vertical or Horizontal
Max Power 50 Watts
Connector RPTNC Plug with Pigtail
Dimension 12.6” x 2” x 2”
Weight 1.4 lbs
Rated Wind Velocity 135 mph
Operating Temperature Range -22°F to +158°F
Front-to-back Ratio +/=20 dB
E-Plane Pattern H-Plane Pattern
10521 Gulfdale, San Antonio, TX 78216 www.terrawave.com www.tessco.com/go/terrawave Phone: [phone] Email: [e-mail]

TerraWave Solutions®5.7-5.85 GHz 15dBi Yagi Antenna
Mounting Bracket Information for T58150Y13602 and T58175Y13602
Installation Instructions:
• The antenna is in vertical polarization mode by default.
• For horizontal polarization installation, unscrew the antenna from the
L-bracket and rotate 90 degrees. Screw the antenna back to the L-bracket.
Be certain that the polarization arrow is parallel to ground when installed.
• Mount the antenna to the mast with U-bolt and hex nuts.
• Adjust the antenna angle until the signal reception is optimized.
• Fasten all screws and seal the connector with weatherproof tape.
Note: Mast mount diameter: ≤2”
10521 Gulfdale, San Antonio, TX 78216 www.terrawave.com www.tessco.com/go/terrawave Phone: [phone] Email: [e-mail]