Beforeyou Install
Caraudioequipmentinstallationscan be troublesomeat times,even to
the mostexperienced ofinstallation technicians.Ifyou arenot confident
working withelectricalwiring, removing and reinstalling interiorpanels,
carpeting,dashboardsorother componentsofyourvehicle, pleasecall
your dealerinorder tohavethe unitprofessionallyinstalled
Helpline No. UK/Northern Ireland 01270 508538 Rep.Ireland 1800 995 036
Web Support www.quesh.co.uk
Model No: 47743 6
1.Removethe outer trimframe.
DinFrontMount
2.Insert the keyssupplied withthe oldunit
intobothsidesof the unitasshowninfigure
belowuntiltheyclick.Pull toremovethe old
unitfromthe dashboard.
DONOTDISCONNECT
WIRES ATTHISTIME!
3.Markthe polarityofthe speaker wires.
Marking the polarityofthe speaker wireswill makeiteasiertoconnect the
existing speakerstoyourcar radio.Consultwiring diagram ofexisting head
unitbeforedisconnecting anywires. If you arenotpositiveofthe polarityof
the existing wiresfromthe speakerstothe head unit, install newwires.
a.Whilethe oldunitisplaying,
disconnectthe wiresfromone
speaker.
b.Takealengthof masking tape and
folditaround the wiresoitformsa
flag.
c.Onthe masking tape markthe
polarityof the speaker wires(+ &-),
aswell asleft or rightand frontor
rear.
d.Doublecheck that you marked the
firstspeaker correctlybychecking
thatthe speaker wiresarethe same
atthe head unit.
e.Repeatthe procedurefor all of the
speakers.
f. Markthe power, ground and any
otherwiresalso.
