The boss B3106 User manual

3106 • 3107
3116
3601 02 02 02
Electrolux Group Floorcare Helpline
08706 055 055
3106 • 3107 • 3116

GUARANTEE
This guarantee is in addition to your statutory and other legal rights.
BOSS products are carefully designed, manufactured, tested and inspected and in
consequence, we undertake to replace or repair any part found to be defective in mate-
rial or workmanship, within one year of delivery to the original purchaser, free of
charge. You may be required to take the product to your nearest service provider if the
product requries attention during the first year.
There are certain conditions which may invalidate this guarantee:
a. It is dependent upon the appliance being correctly installed and used in accordance
with the Company's instructions under normal domestic conditions within the United
Kingdom or the Republic of Ireland.
b. Service at all times must be carried out by an Electrolux Service Representative or
authorised agent.
c. The guarantee may be invalidated by unauthorised repair or modification of the
appliance.
d. You may be charged by the Electrolux Group if you call for an engineer to resolve a
problem that we believe is covered in the instruction booklet.
The Company does not accept liability for defects arising from neglect, misuse or acci-
dent. This guarantee excludes such normal wearing parts as filters, brushes and dust
bags as the life of these depends upon the amount and nature of use.
Proof of the date of purchase will be required before service under guarantee is pro-
vided. For futher assistance call the
Electrolux Group Floorcare Helpline on 08706 055 055.
Important:
For future reference we suggest you record the following details here, and keep the
receipt with this booklet as proof or purchase.
Purchased from: ____________________________________________________
Date purchased _______________Model No _____________________________
Before you start …check the voltage
Before connecting the cleaner to an electrical supply
ensure that voltage marked on the data plate (on the
underside of cleaner) is correct for your electrical sup-
ply. If is not, do not use the cleaner but refer back to
your dealer.
Connecting to your electrical supply
Permanently connected to the cleaner is a mains sup-
ply (2-core) cable fitted with a non-rewirable plug
incorporating a 13A fuse. In the event of the fuse
requiring replacement the fuse cover should be
removed using a small screwdriver. The old fuse
MUST be replaced by a 13AASTA approved BS1362
fuse and the fuse cover mustbe replaced before the
plus is used again. In the event ofloss of the fuse
cover, replacements can be obtained from your
Electrolux dealer or Electricity Board and must be of
the same colour as indicated by the coloured insert on
the base plug.
If difficulty is experienced in obtaining a replacement,
contact your nearest Electrolux Service Centre.
(Please see the separate Electrolux Service
Organisation leaflet).
In no circumstances must be plug be used with-
out a correct fuse cover fitted.
If the plug that is fitted to your appliance is not suitable
for your socket outlet, it must be cut off and the appro-
priate plug fitted. Remove the fuse from the cut off
plug. The cutoff plug should then be disposed of to
prevent hazard of shocks in case it should be plugged
into a 13 Amp socket in another part of your home
The wires in the mains cable of this appliance are
coloured in accordance with the following code:
Blue: Neutral.
Browm: Live.
As the colours of the wires in the mains cable of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug, pro-
ceed as follows:
The wire which is coloured blue must be connected to
the terminal which marked with the letter N or
coloured black. The wire which is coloured brown
must be connected to the terminal which is marked
the letter L or coloured red.
If using a three-pin plug, do not make any connection
to the terminal marked with the letter E or by the earth
symbol or coloured green or green-and-yellow. This
cleanerisdouble insulated andno earth-connection is
necessary.]
It is in you interest to ensure that the plug is correctly
attached to the mains cable. In case of doubt, have it
done by a qualified electrician, as Electrolux cannot
regard the repair of faults on the plug connection as a
service that can be given free of charge under the
terms of guarantee.
As a general guide to fitting any plug.
• Ensure the lengths of wire inside the plug are pre-
pared correctly.
• Connection should be firmly made after all conduc-
tor stands are entered into the terminal posts.
• When preparing the cable ends take care not to
damage the outer seal, or insulation surrounding the
inner conductors.
• Tighten all screws.
• Replace the top cover of the plug and secure.
When using an electrical appliance, basic precautions should always be followed,
including the following:
READ ALLTHE INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
WARNING
To reduce the risk of fire, electric shock, or injury:
• Do not use out doors or on wet surfaces.
• Do not leave vacuum cleaner when plugged in.
• Do not allow to be used as a toy. Close attention is necessary when used near
children. Do not allow children to operate this appliance.
• Use only as described in this manual. Use only manufacturer's recommended
attachments.
• Do not use with damaged cord or plug. If vacuum cleaner is not working as it
should, has been dropped, damaged, left outdoors, or dropped into water, return it to
a service centre before using.
• Do not pull or carry by cord, use cord as a handle, close door on cord. Keep cord
away from heated surfaces.
• Do not use extension cords or outlets with inadequate current carrying capacity.
• Turn off all controls before unplugging.
• Do not unplug by pulling on cord. To unplug, grasp the plug not the cord.
• Do not handle plug or vacuum cleaner with wet hands.
• Do not put any object into openings. Do not use with any opening block, keep free
of dust, lint, hair and anything that may reduce air flow.
• Do not use to pick up anything that is burning or smoking, such as cigarettes,
matches or hot ashes.
• Do not use without dust bag in place.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids such as gasoline, or use in
areas where they may be present.
• Store your cleaner indoors in a cool, dry area.
• Keep your work area well lighted.
• Unplug electrical appliances before vacuuming them.
SAVE THESE INSTRUCTIONS
3106 • 3107 • 31163106 • 3107 • 31163106 • 3107 • 3116
The Electrolux Group, 101 Oakley Road, LUTON, BEDFORDSHIRE, LU4 9QQ
Features of the BOSS vacuum cleaner and accessories with it are protected in Great Britain
and abroad by Patents of Registered Designs.
This appliance conforms with the requirements of the amended E.E.C. directive No.
89/336/EEC relating to electromagnetic compatibility (EMC) CE.
The Electrolux Group may introduce modifications to their product from time to time, and
consequently the details given in this booklet are subject to alteretion without notice.
ELECTRICAL SUPPLY INSTRUCTIONS

MAINTENANCE
REPLACING THE DUSTBAG
 Always operate the cleaner with the dustbag installed.
 If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not
close completely.
 After removing the flexible hose, open the front cover using the compartment open button.
(fig. 19)
 Rotate the support of the bag to the vertical position.
 Remove the dustbag and insert a new one.
 Close the cover by pressing down until it clicks. (fig. 20)
 The dustbag reference number is U62
BLOCKED AIRFLOW AND DIRTY FILTERS
 The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters
are blocked with dirt.
 Disconnect from mains and allow the cleaner to cool for 45-60 minutes. Remove blockage
and/or clean filters.
 Restart the cleaner.
REPLACING THE FILTERS
 The dustbag must be replaced if the window of the dustbag full indicator is illuminated
when the cleaner is operating at maximum power and the nozzle is raised from the floor.
 Filters should be replaced at least twice a year or when they become visibly soiled.
 Always operate the cleaners with filters installed to avoid reduced suction.
 Disconnect from electrical outlet before cleaning filters.
Replacing the motor filter
 Pull dustbag upward and remove the motor protection filter. (fig. 21)
 Put a new motor filter into the cleaner and close the front cover.
Replacing the exhaust filter
 Open the filter grill to remove the exhaust filter. (fig. 22)
 Take off the filters from the grill. (fig. 23)
 Put a new filter back on to the filter grill. (fig. 24)
 Close the filter grill. (fig. 25)
3106 • 3107 • 3116 3106 • 3107 • 3116

IMPORTANT SAFEGUARDS
Please read this instruction booklet carefully.
Before using the appliance, check that the mains power voltage corresponds to the voltage shown
on the rating plate.
Do not switch the appliance on if it appears to be faulty in any way or it has a damaged cord or plug.
Do not try to repair the appliance by yourself. For repairs or accessories, contact the Electrolux
Group Floorcare Helpline on 08706 055 055.
Always remove the plug from the power socket when the appliance is not in use and before carry-
ing out any cleaning or maintenance operations.
Never leave the appliance unattended when it is switched on. Keep the appliance out of reach of
children.
This appliance is for domestic use only. Use as described in this instruction booklet.
Do not pull the appliance by the cord. Do not unplug by pulling on the cord.
Do not use the appliance on wet surfaces or to vacuum liquids, mud, ash and burning cigarette
butts. Do not vacuum up any highly flammable or explosive substances or gases.
Do not unplug the vacuum cleaner with wet hands.
Do not operate the vacuum cleaner too close to heaters and radiators, stoves etc.
Before you start using the vacuum cleaner, please remove large or sharp objects from the floor in
order to prevent damage to the dustbag.
INSTRUCTIONS FOR USE
Before operating the vacuum cleaner, make certain that the filters are in the proper position.
Unwind a sufficient length of cable and insert the plug into the power socket. A YELLOW mark on
the power cable shows the ideal cable length. Do not extend the cable beyond the REDmark.
Press the ON/OFF button to switch the appliance on. It is advisable to set the power control to MIN
before switching on the appliance (model 3116).
To rewind the power cable, press the rewind button with your foot, and guide the cable with your
hand to ensure that it does not whip causing damage.
By moving the variable power control, the suction power can be adjusted to suit different types of
flooring i.e. MIN setting for vacuuming light rugs (model 3116).
DESCRIPTION OF PARTS
1. Suction inlet
2. Dustbag full indicator (models
3106, 3107, 3116)
3. Variable suction control
(model 3116)
4. On/off switch
5. Cord rewind button
6. Wheel
7. Dustbag compartment
8. Carrying handle
9. Cradle carrying handle
10. Compartment open button
11. Flexible hose
12. Plastic tubes (model 3106, 3107)
13. Telescopic tube (model 3116)
14. Floor nozzle
15. Dusting brush
16. Crevice nozzle
17. Dustbag
18. Vertical parking/storage slot
3106 • 3107 • 3116 3106 • 3107 • 3116
SERVICE
Should you require service on your Boss cleaner, please telephone the Electrolux
Group Floorcare Helpline on 08706 055 055.
PROTECTING THE ENVIRONMENT
 Attempt to recycle packaging material and old appliances.
 The cardboard packaging can be placed in the waste paper collection.
 Deposit the plastic bag made of polyethylene (PE) at the PEcollection point for recy-
cling.
Recycling the appliance at the end of its life:
 The plastic components all carry a material identification marking so that, like the other
materials, they can by recycled at the end of the life of the appliance.
 Please inquire with your local authority.