The Greenhouse People 4 Tier User manual

4 Tier Aluminium Seed Tray unit.
INSTRUCTIONS
Please read all before you begin.
Nuts / Bolts &
Black caps
Legs
x 4
'Short Side'
x 8
'Long Horizontal'
x 8
Components:
• Layout the four legs.
• Join each pair together with the 'Long Horizontal'
parts to form the two main frame sections of the
overall frame.
• Place one of the main frame sections up against a wall
(for stability) and attach the 'Short horizontal' parts. It
will be unstable at this stage due to the un-tightened nuts
and bolts.
• Attach the other main frame in a similar manner forming
the cage. PTO
• Tip your nuts, bolts and caps into
one of the seed trays.
• Throughout initial assembly the
nuts and bolts need only be finger
tight. The structure will be squared
out on a level floor later on.
• In this model the nuts need to face
away from the frame to allow for
the black caps to be inserted in the
final stages.

If you would like a
brochure containing our
extensive product range
then please contact us at,
‘The Greenhouse People’,
Unit 9B Blythe Park,
Cresswell Lane,
Cresswell,
Stoke—On—Trent.
Staffs.
ST11 9RD.
• Move the frame into situ.
• Insert trays.
If you have any queries
please do not hesitate
to call us on 01782 388811.
www.thegreenhousepeople.co.uk
• Stand the frame on a level floor so the frame is square when the nuts are tightened.
• Tighten-up each nut and bolt ensuring that both the long and short horizontals butt up against the leg.
This creates a tight fit for each tray in the frame. Make the horizontals flush at the top for a neat smooth finish.
• Check that the frame is square, diagonal measurements should be equal. Adjust If necessary.
• Push the 'black caps' onto each nut.
Flush at top.
Push
on
black
caps.
Butt up tight