The Interior Gallery TIG-621072 User manual

8''
Front View
Top vertical view
1
Notes:
• Please turn off water-lines and drain
before installation of vanity
• Drain, pipe and trap are not included
• Loosen the knobs inside drawers
then install them correctly in the front
INSTALL ATION
GUIDE
www.TheInteriorGallery.com
Tel: [phone]
Model TIGNo.: -621072
Packing list
• Main cabinet • Countertop and backsplash
• Sink • Instruction manual
Cabinet Size:72''W x 22''D x34''H
Side View
22''
72''
8''

• Stick the backsplash on the countertop using a transparent silicone and let dry
INSTALL ATION
GUIDE
2
bottom
glue
top
backsplash
bottom quartz
Use a knife to remove excess glue
1.2.3.4.
Installing the drain
top backsplash

3
1.2.
3.4.
12"or 16"
INSTALL ATION
GUIDE
• After installing the backsplash on the cabinet, put the drain assembly inside the hole in the sink
and fix it firmly.
• Tie up the mounting rubbers and metal rings from the bottom of the drain.
• Connect the trap onto the drain bottom.
Hanging Mirror On The Wall
• Measure the distance between the screw holes from the back of the mirror.
• Locate the studs on the wall. They are normally placed 12” to 16” apart from each other. Drill two
holes on the studs as per your previous measurement.
• Insert the plastic plugs into the drilled holes and then insert screws into the plastic plugs. Tie up
the screws till they remain at least 0.5” – 0.75” outside the wall.
• Hang the mirror on to the wall