HULALA HOME RCXA0464 User manual

NOTE:
ITEM NO. RCXA0464
This brochure contains IMPORTANT safty info. Please read
and keep for future reference.
WARRANTY
We strive to offer high-quality products, and we also try our
best to satisfy each and every customer that orders from us with
product or service as needed. We provide 30 days warranty
starting from the time you receive the item. Each customer must
provide a record of their order such as the order number, or
item receipt for any items that are out of the warranty period
you may also still receive replacement parts by purchasing them
with our company if they are available.
Are you having difficulty
with assembly? Missing parts?
Please send email with your order No to
customerser[email protected]om
For return, please check the return policy with
the retailer or market place you bought from.
Appreciate your purchasing from us.
Pop up your life by our furniture piece!

MAINTAINANCE
AND WARNING
Keep furniture away from heat.
Do not clean furniture with harsh cleansers or
polish. Do not use detergents, Solvents,
abrasives, spray packs or leather cleaner. Use
non-color mild soap with warm water clean
spills(Mix 1:10 soap to water)
Do not place furniture under direct sunlight,
material will possibly fade over time.
Do not use on site dry Cleaning machine.
Children should not climb or jump on the
furniture.
Do not write on furniture without a padded
barrier to protect the surface.
Not for commercial use, For residential use
only.
Weight Limitation
250LBS
PARTS
LIST

HARDWARE
LIST
ASSEMBLY
INSTRUCTIONS
SPARE
Be sure to check all packing material carefully for
small parts, which may have come loose inside the
carton during shipment.
STEP 1：Turn the seat frame A upside down on clean
padded surface, use bolt #2, allen key #3 to attach
front leg E and use bolt #1, allen key #3 to attach
back leg F to bottom of seat frame A, make sure all
bolt holes align then fasten all bolts to secure.

STEP 3:Turn the chair base assembly upright,
carefully align male and female metal brackets on
both sides then push the back B all the way down to
secure.
STEP 2：Take floor pads #4 and paste on bottom of
legs E/F.

STEP 5:Carefully align male and female metal bracket
then slide the left wing C and right wing D down to
secure.
STEP 4: Smooth the lower back flap and carefully
secure the velcro belt to rear bottom edge of seat
frame.

STEP7 : Push the backrest to fully recline the chair or
press the footrest to return the chair to upright
position.
STEP 6:Assembly completed.