Safavieh Furniture WIK6510 User manual

WIK6510
18.11" x 19.68" x 33.66"
NOTICE
PREPARATION
CARE AND MAINTENANCE
Please make sure that you have all parts indicated and they are in good c fore you begin assembly of this item.
Refer to part list and hardware list below for guidance.
* This it ace to prevent scratching the finish during assembly.
* This item may requir tening.
* If you are having difficulty, our friendly Customer Care team is always here to help.
Please email [e-mail]
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and
hardware contents list.
* If any part is missing or damaged, do not a empt to assemble the product.
* Es ted Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
RATTAN CARE : Do not expose your furniture to any liquids. All liquids should be wiped up immediat
slightly damp cloth in the dir a an. Do not expose your furniture to strong or direct sunlight, heat outlets,
open windows and dampness. Excessive exposure to sunlight can cause fading of your furniture finish. Extreme
temperatures and humidity changes can cause cr
Weight Capacity - 175 LBS
Warning : Do not stand on Chair
Warning : Do not over torque bolts.
WARNING
Part List and Hardware List
A
BLegs
Seat
HW1
HW2
Allen Bolt
NO. DESCRIPTION PICTURE QTY
1
1
4
Ring / Spacer 4
HW3 Allen Key 1
4 mm
12 mm
6 mm
38.1 mm

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not a empt to assemble the product.
* Es ted Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
Hardware is located inside the box. You can find them placed
near the sign 'HARDWARE INCLUDED’
STEP 1 : PUT THE SEAT ON TOP OF ITS BASE. FOLLOW THE ARROW HEAD
AND SIGNS TO PLACE IT CORRECTLY. ALIGN ITS HOLES SO BOLTS CAN BE
PLACED PROPERLY.
STEP 2 : INSERT BOLTS IN EACH HOLE. TIGHTEN THEM USING ALLEN KEY
(PROVIDED). DO NOT OVER TORQUE BOLTS.
STEP 3 : YOUR CHAIR IS READY. SEAT BACK AND RELAX.
A
B
A
HW1
HW2
HW3
B