EefaCo.Store 88 5180 08 User manual

Part List
Media Cabinet
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
Hardware List
Hex Wrench
1 pc.
Head Cap Bolt (long)
4 pcs. (+1 extra)
Cam Lock
10 pcs.(+1 extra)
Cam Lock Screw
10 pcs.(+1 extra)
A.
Top
1 pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
B.
Side Panel
1 pc.
D.
Front Rail
1 pc.
E.
Back Stretcher
2 pcs.
C.
Side Panel
1 pc.
Wood Screw
for Back Panel
8 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
F.
Back Piece
1 pc.
G.
Back Panel
2 pcs.
H.
Base
1 pc.
J.
Shelf
4 pcs.
I.
Leg
2 pc.
K.
Door
1 pc.
L.
Door
1 pc.
Cross Dowel
4 pcs. (+1 extra)
Head Cap Bolt
4 pcs. (+1 extra)
Adjustable Pin
16 pcs. (+2 extra)
Machine Screw
4 pcs.
Door
Pull Handle
2 pcs.
Wood Screw
for Megnet
8 pcs. (+1 extra)
Magnet
4 pcs.
88 5180 08
Arts & Crafts

Assembly Instructions 2/4
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
Cam Lock Screw
STEP 1
A
B
C
STEP 2
Attach Front Rail (D) and Back Stretcher (E)
to Side Panel (B) using Cam Lock.
Put Cam Lock Screws into the pre-drilled holes of Top (A) Side Panel (B),(C) and tighten.
Attach 2X Magnets to Front Rail (D)
with Wood Screws. (see Figure 1)
Wood Screw
Magnet
D
(Figure 1)
Magnet
Wood Screw
B
E
D
Cam Lock

Assembly Instructions 3/4
STEP 3
STEP 4
Attach Base (H) to unit
with Head Cap Bolts (long) and Cross Dowels.
Attach Leg (I) to Base (H)
with Head Cap Bolts.
I
I
H
Head Cap Bolt (long)
Head Cap Bolt
Cross Dowel
Attach Back Piece (F) to Back Stretcher (E).
Slide Back Panel (G) to the unit.
Attach Back Stretcher (E) to the unit using Cam Lock.
Attach Side Panel (C) to the unit using Cam Locks.
G
F
G
E
E
C
Cam Lock

Assembly Instructions 4/4
STEP 5
H
Place Top (A) on the unit with Cam Locks.
Attach Magnets at the Pre-drilled Holes of Base (H) with Wood Screws.
Attach the Door Pull Handle to Door (K) and (L) using Machine Screws. (see Figure 2)
Attach Door (K) and (L) to unit by sliding the door lift hinges into the Side Panel lift hinges.
(see Figure 3)
Insert the Adjustable Pins into both
Side Panels at the desired level.
Place Shelves (J) into position.
Insert 8X Wood Screws from the back
of the unit and tighten.
(see Figure 4)
K
L
J
J
J
J
A
(Figure 3)
(Figure 2)
(Figure 4)
Pull Handle
Machine Screw
Wood Screw
Magnet
Adjustable Pin
Wood Screw
Cam Lock