
ON 2H 4H 6H
CONTROL PANEL INSTRUCTIONS
WARNING:
• Do not shake, move or add water while the diffuser is plugged in.
• Keep the product out of reach of children.
• Do not handle any part of the diffuser or adapter when your hands are wet.
• Unplug the diffuser during filling and cleaning.
• The diffuser will not work without water.
• Do not tilt diffuser while it contains water and/or is still plugged in.
• Do not set on or use near wood surfaces.
• Empty diffuser of excess water by pouring water away from side with electrical
port or buttons.
STEP FIVE
A. Plug the power adapter (3) into the back of the water tank (2), being
careful to keep the diffuser level.
B. Plug the other end of the power adapter (3) into an electrical outlet.
C. Push to turn on. Set the timer to control when the diffuser turns off,
or allow it to turn off automatically when its empty. The green timer light
will indicate the amount of time remaining.
MAX
MAX
BUTTON PRESS RESULT
Power/Mist
First Time Mist On, Light On
Second Time Mist On, Light O
Third Time Turn O
Press & Hold 2 Seconds Weak Mist
Press & Hold 2 Seconds Regular Mist
*
Timer
First Time 2 Hours
Second Time 4 Hours
Third Time 6 Hours
11
2
3
22
2
*Turn the unit on to set the timer.
STEP ONE
Remove the cover (1) from the water
tank (2).
STEP TWO
Fill the water tank (2) with tap or
filtered water up to the max line.
STEP THREE
Add 5–10 drops of pure essential oil
to the water.
STEP FOUR
Place the cover (1) back on the water
tank (2).
SETTING UP & OPERATING YOUR
AROMATHERAPY DIFFUSER
To clean your Pure Company Aromatherapy Diffuser, gently wipe the outside
with a soft, damp cloth.
The owner’s manual for your Pure Company Aromatherapy Diffuser
(including additional care and cleaning instructions), and its warranty
information, are available online at thepurecompany.com/support.
2
Light
Control Panel
65-00668_VA-01040