THE RADIATOR COMPANY Chalfont User manual

Materials Brass
Connections ow and return.
Test pressure 6.9 Bar
Testing authority EN442
Maximum operating pressure 1.5 Bar
Maximum working temperature 80 ºC
Packaging Cardboard and foam protection in cardboard box
1
2
”
The Radiator Company
Units 13 - 14 Charlwoods Road
East Grinstead
West Sussex
RH19 2HU
All products must be inspected once removed from the packaging and The Radiator Company notied
within 28 days of delivery of any scratches, blemishes or other damage.
The Radiator Company will then replace the radiator.
Imperfect radiators should therefore not be tted and The Radiator Company will not accept responsibility
for replacement of scratched or damaged radiators once they have been tted. This includes any
consequential loss or cost of tting.
If The Radiator Company are not notied within 28 days of the date on the signed delivery note then it
will be deemed that The Radiator Company have fully complied with its obligations and claims will not be
considered.
Failure to comply with any of the above may invalidate any claims.
We recommend that after you check the product on delivery that it is stored in its packaging to prevent
damage prior to installation. The Radiator Company cannot accept responsibility for items damaged after
delivery.
Terms & Conditions
Guarantees & Liabilities
As we are not the manufacturers of this product we will take all reasonable endeavours to make over to
you the benet of any warranty or guarantee given by the manufacturer, which is usually ve years on most
of our range. (Copies of specic guarantees for any of our products are available on request).
The guarantees in all cases are subject to the products being installed in accordance with British and or
European standards as well as these tting instructions. The guarantees in all cases are restricted to the
free of charge replacement or repair of the failed product only. Our liability will under no circumstances
extend beyond the repair or replacement of the product supplied by us. Claims for either labour in
replacement or damage to property are not admissible. Any goods that are returned, in the event of a
problem, will belong to The Radiator Company.
Technical Specications
This classic range of towel rails includes this
neat and stylish wall hung design along with
two oor standing models.
Please read these instructions and terms and
conditons carefully prior to installation.
Failure to do so may invalidate the warranty
Chalfont
Wall Hung
Fittings Instructions
If you have any questions please contact us on 01342 302250
www.theradiatorcompany.co.uk
If you have any questions please contact us on 01342 302250
www.theradiatorcompany.co.uk
5
Y
e
a
r
G
u
a
r
a
n
t
e
e
Y
e
a
r
G
u
a
r
a
n
t
e
e
THE
RADIATOR
COMPANY
CHALW1.2
PLEASE NOTE:Systemsusingmicroborepipeworkmusthaveadequatepressureandow
rates for the number and style of radiators on the system.

Unpack & Inspect
1
You should have:
• 1 Radiator
You will need:
• Tape measure
• Electric drill and bits
• Spirit level
Usingasuitabledrillbit,screwsandplugs,xthebrackets
and level with a spirit level. Please see diagrams.
Fix Brackets
4
Contents
2
Mark Bracket Positions
3
Diagrams of Chalfont
The Radiator Company prides itself on selecting products
frommanufacturerswhoexercisetightqualitycontrol
measures.Weonlyselectmodelswithexcellentstandards
ofweldingandbrazing,aswellashighqualitynishes.
All of our products are well packaged and should reach
you in perfect condition. Just in case however, we offer a
minimum 5-year no quibble guarantee for all radiators and
towel rails.
Please carefully unpack and inspect this radiator and all
ttings.
TheRadiatorCompanymustbenotiedofanyshortages
or damage within 28 days of delivery.
For further information please see terms and conditions on
back page.
Hold up the radiator to the wall in the desired position and mark
the screw holes. The centre of the bracket should be 37.5mm when
measured in from the side from the edge (please see diagram
opposite).
Inordertoaccuratelymarkthebottombracketxingpositionswe
recommendyoumark,xandlevelthetwotopbracketsrst.Then
hang the radiator, ensuring it is vertically level and manually hold the
bottom brackets in position while marking.
PLEASE NOTE :
It is essential that all brackets are level to
ensure a vertical alignment for connecting the
pipework.
Pipe Centres
Pipe centres
Pipe centres from wall
Maximumdepthfromwall
Commission
5
Please Note:
In accordance with Part L1 2006 of the Building Regulations and
BS7593:1992 code of practice for the treatment of hot water
and central heating systems, we strongly recommend flushing
the heating system post installation of new radiators and then
adding the correct quantity and type of inhibitor for use with
your radiator and system to prevent corrosion. Damage caused to
systems not protected by a suitable inhibitor will not be covered by
manufacturer’s guarantee.
425mm
50mm
125mm
125
37.5
50
125
4
425