Theben TIME GUARD LIMITED LED400FLW Manual

5 6
67.058.487
Timeguard Limited.
Victory Park, 400 Edgware Road,
London NW2 6ND
Sales Office: 020 8452 1112
or email csc @ timeguard.com
For a product brochure please contact:
or email helpline @timeguard.com
HELPLINE
020 8450 0515
32W LED
FLOODLIGHT
Model: LED400FLW - White
Model: LED400FLB - Black
I n s t a llation&O p e r ating In s truc t ions
LED400FLW.1_Instructs_147x105.indd 5,7 31/05/2012 1.57pm
Prepared by: Sally
Lamp adjustment
3 Year Guarantee
In the unlikely event of this product becoming faulty due
to defective material or manufacture within 3 years of the
date of purchase, please return it to your supplier in the
first year with proof of purchase and it will be replaced free
of charge. For years 2 and 3 or any difficulty in the first year telephone
the helpline on 020 8450 0515.
WARNING
The temperature of the lamp is very high during operation. You will get hurt
if you touch the heat sink.
High Temperature
10
20
30
40
-20
+40
10
20
30
40
The lamp can be tilted down 55 degree and pan outward 50 degree with the
spacer or 40 degrees without.
Top View
The lamp can be tilted down 55 degree pan outward 90 degree to left
The lamp can be tilted down 55 degree and
pan outward 90 degree to right.
Side View
TECHNICAL SPECIFICATIONS
Weatherproof IP55
55°
50°
Spacer
50°
Spacer
90
55°
55°
90°
90°
Supply 220 - 240V 32W
Output 2000 Lumens

1234
1. Designated Use
•LED400FL is an outdoor LED light.
•Suitable for installation on walls.
•Simple plug in wall plate for easy & safe connection.
•Suitable for a wide range of locations: corridors, gardens, staircases,
entrances, garages, outdoor parking areas etc.
Index :
Page 2 Contents & Tools required.
Page 3 Product dimensions.
Page 4 Installation procedure.
Page 5 Lamp adjustment
2. Basic Safety Instruction
Danger of death through electric shock or fire!
•Must only be installed by qualified electricians.
•Avoid the metal parts of the device due to potentially high temperature.
•The device conforms to EN60598 for designated installation; IP55 in
accordance with EN 60529 and IEC62471 Photo biological safety of
•Designed for use in normal environments.
•Intended for outdoor installation.
•Energy saving.
•Long LED bulb life.
LED400FLW.1_Instructs_147x105.indd 1-4 31/05/2012 11.16am
Prepared by Sally
3. Contents:
What’s in the box?
5. Product Dimensions:
Spacer dimension:
179.00
131.00
108.00
179.00
270.00
31.00
270.00
67.00
161.00
179.00
108.00
15.00
104.00
91.00
2
5
3
14
6
7
MOUNTING SCREW x 2
φ5mm
60mm
6. Installation Procedure:
Screw the wall plate
to the unit.
Unit goes into warm-up
period for 40 sec.
Connect the mains supply cable to the
terminal block on the backplate as follows.
( See connection diagram )
CONNECTION:
LIVE
NEUTRAL
EARTH
BLUE
GREEN / YELLOW
BROWN
8
Feed the wires through rubber gasket of the wall plate with spacer and attach
to corresponding terminal.
Fix the spacer with the wall plate to the wall or the wall plate alone.
Attach the device
to the wall plate.
240V
9 10
Use the spacer if necessary
Push
Page 6 High temperature in lamp.
INSTRUCTION
MANUAL
X1
WARNING
* The Spacer is an optional fitting
which gives maximum Pan angle.
lamps and lamp system.
Fix the spacer
to the wall plate
- if required.
Switch off
the power.
Unscrew the
wall plate.
Push and open
the wall plate.
CAUTION:
X1 X1
X2
X2
4. Tools required:
X 1 X 1
X 1
Tools / Equipment need for installation.