
Introduction
CHDMI-8 is a high performance HDMI distribution amplifier.
It allows one HDMI source to connect up to 8 HDMI displays simutaneously.
Features
1. Built-in EDID simulator and HDCP keyset allows each output to work independently
when connecting to a HDMI display.
2. Splits a HDMI source up to 8 outputs without signal loss.
3. Supports DVI source and DVI display by using HDMI to/from DVI adaptor cable.
4. Supports a wide range of PC and HDTV resolutions-from VGA to UXGA
and 480p to 1080p. Maximum resolution bandwidth-165MHz.
5. Can be cascaded up to a minimum of 3 layers,or more depending on your
cabe quality.
6. Each of the buffered output can run up to 15 meters@1600x1200.
Operation Controls and Functions
Front Panel
114
2
3
1. HDMI output 1/2/3: Connect to the HDMI input of your displays.
2. HDMI input: Connect to the HDMI or DVI output of your source equipment
such as DVD player or set-top-box.
3. Sync LED: The LED will illuminate when the HDMI source signal is connected
to the input.
4. Power input: Plug the supplied 5VDC power supply into the unit.
The LED will illuminate when connected.
Rear Panel
1
1. HDMI output 4/5/6/7/8: Connect each of these output ports to the HDMI input
of a HDMI display.
4
HDMI OUT
5
HDMI OUT
6
HDMI OUT
7
HDMI OUT
8
HDMI OUT
3
HDMI OUT
2 1
HDMI OUT SYNC HDMI IN HDMI OUT POWER
DC 5V
CHDMI-8
HDMI SPLITTER