Therma Q Designer Tap User manual

Suitable for kitchen sinks or
washbasins, replacing the
existing taps completely.
DESIGNER
TAP
T/ELECTRIC/OCTOBER/2016/VER1
RoHS
ErP
COMPLIANT
UNIT 3 SANDBEDS TRAD. EST. DEWSBURY ROAD
OSSETT WEST YORKSHIRE WF5 9ND
T 01924 270847 F 01924 271310
SALESTHERMAQ.CO.UK WWW.THERMAQ.CO.UK
EXCELLENCE IN HOT WATER TECHNOLOGY
ThermaQ endeavour to keep the content of this
brochure as up-to-date as possible. We reserve the right
to make changes to all ThermaQ products and services
at anytime. To ensure you have the most current
information please contact ThermaQ directly.
Follow us on twitter @ ThermaQ
EXCELLENCE IN HOT WATER TECHNOLOGY

Please read and follow the installation and operation
instructions carefully, to ensure the long life and reliable
operation of this appliance.
CONTENTS
Important Safety Instructions........................................................................................ 3
Product Features ................................................................................................................................... 4
Technical Data............................................................................................................................................ 4
Product Inner Structure............................................................................................................ 5
Electrical Diagram............................................................................................................................... 5
Product Inner Structure............................................................................................................ 5
Installation Guideline.................................................................................................................... 6
Operation Instructions............................................................................................................10
Trouble-Shooting.............................................................................................................................11
Packing List.................................................................................................................................................11
Attention!
Under no circumstances should you attempt to install, repair or disassemble the instant hot
water tap without rst shutting o all power to the unit directly at the circuit breaker box.
Installation of this product is restricted to indoor locations.
Important Safety Instructions
1. For your satisfaction and safety, read all instructions before installing or using this
ThermaQ instant hot water tap.
2. This particular unit is not intended for commercial use.
3. This appliance should be connected to mains water feed.
4. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that
they do not play with the appliance.
5. Make sure that all electrical wiring, plug and connections conrm to local codes.
Means for disconnection must be incorporated in the xed wiring in accordance
with the wiring rules. This appliance must be installed in accordance with the
national wiring regulations.
6. If you suspect there is too much chlorine in your water, it is recommended to use a
water ltration system.
7. This appliance MUST NOT be switched on if you think it may be frozen, as this
could result in serious damage to the unit. Wait until you are sure
that the ThermaQ Designer Tap has completely thawed out before you switch it on.
8. Please test the outlet hot water temperature with your hand to make sure it is
suitable for showering to avoid possible scalding or injury.
9. Filter screen is required to be xed at the water inlet. And the lter screen should be
regularly cleared. The spray head must be descaled regularly.
10. The outlet must not be connected to any tap or tting other than those specied.
11. In cold winter, if the hot water temperature is not hot enough, the hand shank can
be used to adjust the water ow to increase or decrease the hot water temperature.
12. The appliance was processed with a water test and energization test before leaving
the factory, if there is a little water at the water inlet and water outlet while you use
it for the rst time, it is a normal phenomenon, please allow the tap to ush through.
13. The gate of water inlet & outlet must not be blocked.
14. If there is damage to the wire, you must contact a qualied electrician to replace it
with dedicated wire from our authorized dealers.
15. The instructions must state that the rated pressure is 0.4-4 Bar.
Excellence in Hot Water Technology.
23
ThermaQ Specification Hotline [phone]

Product Features
This electric hot water tap is for household and public use. It can be used for kitchen sinks
and basins etc. It is not suitable as a shower outlet. Finished in a clean steel look, the tap
provides instant hot water on demand in virtually any location that has access to mains water
and electricity – simply mount the tap in the sink or basin, connect the cold mains and have
an electrician make a safe connection to a power supply. Easy to use without instructions,
the agship of our new heating range works like a regular tap, but allows for hot water access
where it wasn’t possible before.
PRODUCT
STRUCTURE
1. Point of use application so can be
located almost anywhere.
2. Compact, stylish unit with built in
heating element.
3. Easy installation using supplied
power cord.
4. Built-in physical electricity guard.
5. Overheat protection, heating will
cut-o automatically at 50C.
6. Manual water and power control
switch & automatic mechanical
water pressure switch with
double control mode to completely
avoid dry heating.
7. Simple operation to deliver hot and
cold water.
8. Rotatable nozzle.
9. Between 1-2L/minute dependent
on incoming mains and required
temperature.
Excellence in Hot Water Technology.
45
ThermaQ Specification Hotline [phone]
L
E
N
Power Switch
Water
Pressure
Switch
Fuse
Link
Heating
Element
Water
Outlet
Indicating Light
Micro Switch
Heating
Element
Water
Inlet
Pipe
Hand
Shank
SPECIFICATIONS
Product codE EWH0001
PowEr 3.3kW
oPErating Flow 12L
MatErial HIGH QUALITY STAINLESS STEEL
VoltagE 220240V
ratEd currEnt 13.6A
ratEd FrEquEncy 5060Hz
rEcoMMEndEd cablE sizE 1.5mm2
oVErhEat ProtEction 940C
thErMal cut-out 500C
iP rating IP25
rEcoMMEndEd cablE sizE 1.5mm2
worKing PrEssurE 0.44 bar
watEr connEctions G1/2”
diMEnsions 198 x 160 x 98mm
ELECTRICAL DIAGRAM

Installation Guideline
The installation must be in compliance with the National Electrical
Regulations and your local electrical and plumbing codes.
1. Make sure the appliance is intact, and the ttings are complete.
2. Please make sure the main power supply, water pressure, grounding condition,
ammeter and wire reach the standard of installation requirement.
3. The appliance must be connected to properly grounded dedicated branch
circuits of proper voltage rating.
4. If you will not use the tap for long time, please switch o the leakage protection
plug.
5. Position the unit upright with all plumbing connections at the bottom of the unit.
6. During the installation, water supply must be tested for adequate ow before
turning on the power supply..
Installation Method
INSTALLING THE UNIT
1. The appliance can t 2 dierent mode of power connection, 1) power connection is
above the table-board; 2) power connection is below the table-board; Please conrm
the power connection mode rst. Below are the installed assembly drawings.
2. Make the water inlet connection pass through the pedestal, place the power cord into
the cavity of pedestal. Please refer below Fig 2-A and Fig 2-B.
Fig 1. A. Power cord connect
above the table-board.
Fig 2. A. Power cord connect above the table-board.
Fig 2. B. Power cord connect under the table-board.
Fig 1. B. Power cord connect
under the table-board.
Excellence in Hot Water Technology.
67
ThermaQ Specification Hotline [phone]
Powe
r
Cord
Hand
Shank
Powe
r
Cord
Hand
Shank
Power
Cord
Pedestal
Hand
Shank
Power
Cord
Pedestal
Hand
Shank
Hold-Down Nut
Table
Board
Power
Cord
Rubber Ma
t
Pedestal
Hand
Shank
Hold-Down Nut
Table
Board
Power
Cord
Rubber Ma
t
Pedestal
Hand
Shank

3. Make the water connection pass through the rubber mat, please notice there is a
cavity at the rubber mat to t the power cord.
4. Make the water inlet connection pass through the hole in table-board, If the power
cord need to be connect above the table-board, please keep the cable above the table;
please refer to Fig4-A; If the power cord need to be connected under the table-board,
please make the cable pass through the hole in table-board. Please refer to Fig4-B.
5. Fix another rubber mat to the inlet connection under table-board, make sure the
rubber mat completely touch the back surface of the table-board.
6. Fix the hold-down nut to further fasten the tap under the table-board.
Fig 3. A. Power cord connect
above the table-board.
Fig 4. A. Power cord connect
above the table-board.
Fig 5. A. Power cord connect
above the table-board.
Fig 6. A. Power cord connect
above the table-board.
Fig 3. B. Power cord connect
under the table-board.
Fig 4. B. Power cord connect
under the table-board.
Fig 5. B. Power cord connect
under the table-board.
Fig 6. B. Power cord connect
under the table-board.
Hold-Down Nut
Table
Board
Power
Cord
Rubber Ma
t
Pedestal
Hand
Shank
Table
Board
Power
Cord
Rubber Ma
t
Pedestal
Hand
Shank
Table
Board
Power
Cord
Rubber Ma
t
Pedestal
Hand
Shank
Power
Cord
Rubber Mat
Pedestal
Hand
Shank
Hold-Down Nut
Table
Board
Power
Cord
Rubber Ma
t
Pedestal
Hand
Shank
Table
Board
Power
Cord
Rubber Ma
t
Pedestal
Hand
Shank
Table
Board
Power
Cord
Rubber Ma
t
Pedestal
Hand
Shank
Power
Cord
Rubber Mat
Pedestal
Hand
Shank
Excellence in Hot Water Technology.
89
ThermaQ Specification Hotline [phone]

7. Connect the inlet water pipe, please remember to x a lter net inside the nut of
water pipe, please make sure the water is turned o.
OPERATION INSTRUCTIONS
1. For the rst time operating the appliance, please allow water to ow through the tap
before turning on power to the appliance.
2. While the handle faces to the appliance will keep closed. When the shank is
rotated to
C
cold water will come out. Rotate the handle shank
to
H
to activate the hot water with the indicating light displaying red.
3. Rotate the handle to adjust the outlet water ow.
4. The nozzle is rotatable in 360°.
Maintenance
Note: Always turn o the power supply before servicing your unit.
The ThermaQ Designer Tap does not require any regular maintenance. However, to
ensure consistent water ow, the following maintenance is recommended.
1. Periodically remove scale and dirt that may build up at the aerator of the faucet or in
the sprinkler.
2. The lter net at the water inlet should be cleaned from time to time. Please turn o
the water ow before doing this.
3. If you will not use this appliance for long time, please disconnect the plug.
Trouble-Shooting
Hold-Down Nut
Table
Board
Water
Inlet
Pipe
Power
Cord
Rubber Ma
t
Pedestal
Hand
Shank
Hold-Down Nut
Table
Board
Water
Inlet
Pipe
Power
Cord
Rubber Ma
t
Pedestal
Hand
Shank
Fig 7. A. Power cord connect
above the table-board.
Fig 7. B. Power cord connect
under the table-board.
PACKING
LIST
Excellence in Hot Water Technology.
10 11
ThermaQ Specification Hotline [phone]
PROBLEMS POSSIBLE CAUSES CORRECTIVE ACTIONS
No hot water comes
out while the
appliance is turn on.
• Inlet water flow is less than 1L/min.
• No power supply.
• Increase the inlet water flow.
• Check wire & power connection.
Outlet water temp.
is too high. • Water flow too small. • Increase inlet water flow.
Outlet water temp.
is too low. • Water flow too high. • Reduce water flow.
Outlet water flow.
is too low. • Inlet strainer or shower clogged. • Clean strainer and shower
Outlet water flow.
is too high. • Sprinkler blocked. • Clean the sprinkler
ITEM UNIT QUANTITY
Electric Hot Water Tap. Unit 1
User Manual Copy 1
Pedestal Unit 1
Rubber Mat. Piece 1
Hold-Down Nut 1 1
Rubber Ring & Rubber Filter Net. Set 1