Think ahead SR-1009F Series User manual

Receiver for RGBW Remote & Wifi transmitter
Feature
Work with different sender
Work with WIFI transmitter
Model: SR-1009FX
Parameter
Part No. Iuput Voltage Remarks
Current
SR-1009FA 12-36VDC Constant voltage
4x(60-180)W
4x5A
Output
SR-1009EA 12-36VDC Constant voltage
4x(96-288)W4x8A
Product Size
Control RGBW, RGB, CC-CW, Single color LED lighting.
Suitable sender
SR-2818, SR-2819, SR-2819S, SR-2838
RGB+W remote
SR-1009FA3 12-36VDC Constant current
4x(4.2-12.6)W
4x350mA
SR-1009FA7 12-36VDC Constant current
4x(8.4-25.2)W4x700mA
SR-2819CCT, SR-2819S-CCT, SR-2838-CTT
CCT remote
SR-2819S-DIM, SR-2838-DIM, SR-2833
Dimmer remote
SR-2820/ SR-2820(IT)/ SR-2820(US), SR-2835RGB
RGB+W wall mounted panel
SR-2822/ SR-2822 / SR-2822(US), SR-2825B/ SR-2825 /
SR-2825(US)/SR-2830B/ SR-2830 / SR-2830(US), SR-2835DIM
(IT) (IT)
(IT)
CCT wall mounted panel
SR-2833k1, SR-2833k2, SR-2833T1/ SR-2833T1 / SR-2833T1(US),
SR-2833T2/SR-2833T2 / SR-233T2(US), SR-2835DIM, SR-2825A
SR-2825A / SR-2825A(US), SR-2830A/ SR-2830A / SR-2830A(US)
(IT)
(IT)
(IT) (IT)
Dimmer wall mounted panel
18.6
170.4
45.5
178.9
Brief introduction of buttons
12-36VDC power input
or connect next DALI dimmer
Short circuit for master.
Open circuit for slave.
For LED lighting
(RGB/CCT/Single color
LED light)
whi te
SR-1009FA
LED CONTRO LL ER
1234
Learning Key
Learning to sender
1)Receiver Connection Diagram for Single Unit
2) Connection Diagram for Multiple UnitsReceiver
Power Supply
12-36VDC
LN
110V-230VAC
white
SR-1009FA
LED CONTROLLER
1234
Learning Key
white
SR-1009FA
LED CONTROLLER
1234
Learning Key
white
SR-1009FA
LED CONTROLLER
1234
Learning Key
Power Supply
12-36VDC
LN
110V-230VAC
white
SR-1009FA
LED CONTROLLER
1234
Learning Key
Wiring diagram
Operation
Learning (matching)
a. Do wiring according to connection diagram
b. Wake up the remote control by touching ON/OFF button.
c. Press learning button on receiver.
d. Touch any zone button on remote control.
e. Then touch color wheel.
f. Connected LED light will blink to confirm zone designation.
g. Press at learning button on receiver over 5 seconds until LED light flash, then delete the learned ID.
RGB/W or CDW LED strip
RGB/W or CDW LED strip
RGB/W or CDW LED strip
RGB/W or CDW LED strip
Think ahead ESC GmbH I Anzengruberstr. 39 I A-9020 Klagenfurt a. W. I T [phone] I [email protected] I www.think-ahead.at

Note 1: To choose a master from slaves by jumper for each zone.
Short circuit for master.
Open circuit for slave.
Each zone only can set one master controller. After a period of time, the master will do synchronization
operation to keep the same color or mode of all slaves in one zone.
Note 2: Each remote control 8 zones (areas) receivers, each area can be learned as many receivers as
we can.
Each receiver maximally can be controlled by 8 different remote controllers.
Safety & Warnings
Warranty Agreement
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector
1) We provide lifelong technical assistance with this product:
3-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Think ahead ESC GmbH I Anzengruberstr. 39 I A-9020 Klagenfurt a. W. I T [phone] I [email protected] I www.think-ahead.at