thomann Millenium Studio Desk WS20 User manual

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 378751_19.04.16
Studio Desk WS20
1/2
$
%
&
ö
#
Assembly instructions
For mounting the studio desk, use the
supplied screws and washers. Use a soft
padding to avoid damage to the compo-
nents.
1. Screw the support bracket for the
lower table top with each one metric
screw at the desired height on both
side panels.
2. Screw the lower single strut and the
central strut to the keyboard shelf
brackets with each two metric screws
between the two side panels.
3. Screw the two brackets for the key-
board shelf with each two metric
screws properly orientated on the
central strut.
4. Screw the rack frame with four metric
screws right and left between the side
panels.
5. Screw the support for the upper table-
top between the side panels.

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 378751_19.04.16
Studio Desk WS20
2/2
'
(
)
For the transport and protective packaging,
environmentally friendly materials have been
chosen that can be supplied to normal
recycling. Ensure that plastic bags, packaging,
etc. are properly disposed of. Do not just
dispose of these materials with your normal
household waste, but make sure that they are
fed to a recovery. Please follow the notes and
markings on the packaging.
Ensure that plastic bags, packaging, etc. are disposed of
properly and are not within reach of babies and young
children. Choking hazard!
Because of its heaviness, at least two people are always requi-
red for the transport and installation of the studio desk.
Technical specications
Materials used:
– steel sheet (side panels, struts)
– wood (table top)
Dimensions (W×H×D):
1960×1270×1070mm
Weight: 40kg
6. Screw the keyboard shelf on the two
xing brackets.
7. Screw the bigger lower table top on
the two support brackets.
8. Screw the smaller upper table top onto
the upper support.