thomann STAIRVILLE 18x10W RGBWA UV User manual

Retro Flat Par
18x10W RGBWA UV,
18x12W RGBW
LED PAR
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
08.02.2017, ID: 404358, 404364

Table of contents
1 General notes............................................................................................................................................... 6
1.1 Further information........................................................................................................................... 7
1.2 Notational conventions.................................................................................................................... 8
1.3 Symbols and signal words............................................................................................................... 9
2 Safety instructions.................................................................................................................................. 12
3 Features....................................................................................................................................................... 17
4 Installation.................................................................................................................................................. 18
5 Starting up.................................................................................................................................................. 22
6 Connections and controls................................................................................................................... 25
7 Operating.................................................................................................................................................... 28
7.1 Operating mode ‘Manual’............................................................................................................. 29
7.2 Operating mode ‘Auto Run Mode’............................................................................................. 32
7.3 Operating mode ‘Sound Mode’.................................................................................................. 33
7.4 Operating mode ‘Slave’................................................................................................................. 33
7.5 Operating mode ‘Static Colour’.................................................................................................. 34
Table of contents
Retro Flat Par 18x10W RGBWA UV, 18x12W RGBW
3

7.6 Settings menu................................................................................................................................... 36
7.7 Information menu............................................................................................................................ 43
7.8 Operating mode ‘DMX’.................................................................................................................. 44
7.9 Menu overview................................................................................................................................. 46
7.10 Functions in 6-channel DMX mode (Retro Flat Par 18x10W RGBWA UV, item no.
404358).............................................................................................................................................. 50
7.11 Functions in 8-channel DMX mode (Retro Flat Par 18x10W RGBWA UV, item no.
404358).............................................................................................................................................. 51
7.12 Functions in 10-channel DMX mode (Retro Flat Par 18x10W RGBWA UV, item
no. 404358)...................................................................................................................................... 52
7.13 Functions in 4-channel DMX mode (Retro Flat Par 18x12W RGBW, item no.
404364).............................................................................................................................................. 56
7.14 Functions in 6-channel DMX mode (Retro Flat Par 18x12W RGBW, item no.
404364).............................................................................................................................................. 56
7.15 Functions in 8-channel DMX mode (Retro Flat Par 18x12W RGBW, item no.
404364).............................................................................................................................................. 57
8 Technical specifications....................................................................................................................... 61
9 Plug and connection assignments.................................................................................................. 63
10 Troubleshooting...................................................................................................................................... 64
Table of contents
LED PAR
4

11 Cleaning....................................................................................................................................................... 66
12 Protecting the environment.............................................................................................................. 67
Table of contents
Retro Flat Par 18x10W RGBWA UV, 18x12W RGBW
5

1 General notes
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General notes
LED PAR
6

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General notes
Retro Flat Par 18x10W RGBWA UV, 18x12W RGBW
7

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’, ‘OFF’.
Letterings
Displays
General notes
LED PAR
8

The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1. Switch on the device.
2. Press [Auto].
ðAutomatic operation is started.
3. Switch off the device.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Instructions
General notes
Retro Flat Par 18x10W RGBWA UV, 18x12W RGBW
9

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – suspended load.
General notes
LED PAR
10

Warning signs Type of danger
Warning – danger zone.
General notes
Retro Flat Par 18x10W RGBWA UV, 18x12W RGBW
11

2 Safety instructions
This device is intended to be used as an electronic illumination effect using LED technics. The
device is designed for professional use and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
LED PAR
12

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety
Safety instructions
Retro Flat Par 18x10W RGBWA UV, 18x12W RGBW
13

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
Safety instructions
LED PAR
14

NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked flames.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Safety instructions
Retro Flat Par 18x10W RGBWA UV, 18x12W RGBW
15

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
Safety instructions
LED PAR
16

3 Features
The LED PAR is particularly suitable for professional lighting tasks, for example at events, on
rock stages and in theatres and musicals. The device is characterised by compact design and
particularly high light output.
Special features of the device:
n– Retro Flat Par 18x10W RGBWA UV (item no. 404358): 18 6-in-1 LEDs, 10 W each
– Retro Flat Par 18x12W RGBW (item no. 404364): 18 4-in-1 LEDs, 12 W each
nControl via DMX (three different modes), via buttons and display on the unit as well as an
optionally available IR remote control
n14 preprogrammed automatic shows
nSound control
nMaster / Slave mode
nReplaceable lens unit
nRobust metal housing
Features
Retro Flat Par 18x10W RGBWA UV, 18x12W RGBW
17

4 Installation
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Installation
LED PAR
18

NOTICE!
Risk of overheating
Always ensure sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
Installation
Retro Flat Par 18x10W RGBWA UV, 18x12W RGBW
19

NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
fiers.
Please note that this device must not be connected to a dimmer.
You can install the unit in hanging or standing position. When in use, the device must always
be attached to a solid surface or an approved truss. Use the openings provided on the two-
piece bracket for attaching.
Mounting options
Installation
LED PAR
20