thomann Thon Studio DJ Table 1500 User manual

Thon DJ Table 1500
studio desk
assembly instructions

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
15.11.2021, ID: 503688, 503689

Table of contents
1 Safety instructions.......................................................................................................................................................................................................... 4
2 Scope of delivery.............................................................................................................................................................................................................. 5
3 Installation.......................................................................................................................................................................................................................... 6
4 Technical specications............................................................................................................................................................................................. 12
5 Protecting the environment.................................................................................................................................................................................... 13
Table of contents
Thon DJ Table 1500
3

1 Safety instructions
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children.
Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces
and choke!
Never let children play unattended with the product.
CAUTION!
Risk of injury due to heavy weight
Due to the heavy weight of the studio desk, at least two persons are required for transport and assembly.
CAUTION!
Risk of injury to the hands
When assembling and screwing the individual parts, pay attention to sharp edges on tools, screws and components.
Safety instructions
studio desk
4

2 Scope of delivery
Before you assemble the studio desk, make sure the contents of package is complete according to the following list.
Thon DJ Table 1500
n2 × side panel, 19 mm FPY chipboard
n1 × upper rear wall, 19 mm FPY chipboard
n1 × lower rear wall, 19 mm FPY chipboard
n1 × table top, 19 mm FPY chipboard
n1 × front panel, 19 mm FPY chipboard
n28 × wooden dowel
n37 × connector housing
n37 × connector bolts
n1 × cable feed-through
n1 × assembly instruction
Scope of delivery
Thon DJ Table 1500
5

3 Installation
Place all components on a suitable mounting surface for mounting. Use a soft padding to prevent damages to the surfaces.
Overview
The following gure shows an overview of the individual components.
ö $
%
&
'
#
AB C
D
1 Right side panel 6 Lower rear wall
2 Left side panel A Connector bolt
3 Upper rear wall B Connector housing
4 Table top C Wooden dowel
5 Front panel D Cable feed-through
Installation
studio desk
6

Preparing the components
Insert the connecting bolts into the holes provided in the side panels (13 × connecting bolts each).
After insertion, the connecting bolts sit loosely in the drill holes and only spread apart when the connector housings on the associ‐
ated component are tightened.
ö
#
1 Right side panel
2 Left side panel
A Connector bolt
Place the connector housings, the connecting bolts and the wooden dowels into the holes provided in the upper rear wall
(6 × connection bolts, 6 × connector housing, 4 × wooden dowel).
Position all connector housings so that the respective connecting bolts can be completely sunk into the holes and the arrow posi‐
tion of the connector housings points towards the hole.
$
3 Upper rear wall
A Connector bolt
B Connector housing
C Wooden dowel
Installation
Thon DJ Table 1500
7

Place the connector housings, the connecting bolts and the wooden dowels into the holes provided in the table top
(5 × connection bolts, 14 × connector housing, 12 × wooden dowel).
%
4 Table top
A Connector bolt
B Connector housing
C Wooden dowel
Place the connector housings and the wooden dowels into the holes provided in the front panel (9 × connector housing, 6 ×
wooden dowel).
&
5 Front panel
B Connector housing
C Wooden dowel
Installation
studio desk
8

Place the connector housings and the wooden dowels into the holes provided in the lower rear wall (8 × connector housing, 6 ×
wooden dowel).
'
6 Lower rear wall
B Connector housing
C Wooden dowel
Assembling the components
Put the front panel onto the connecting bolts of the table top and tighten the connector housings of the front panel clockwise to
lock the connection with the inserted connecting bolts.
&
%
4 Table top
5 Front panel
Installation
Thon DJ Table 1500
9

Put the table top onto the connecting bolts of the upper rear wall and tighten the connector housings of the table top clockwise
to lock the connection with the inserted connecting bolts.
%
$
3 Upper rear wall
4 Table top – mounted to the front panel
Installation
studio desk
10