thomann LED Colour Flood 10W RGB User manual

LED Colour Flood
10W / 30W RGB
LED floodlight
user manual

Musikhaus Thomann e.K.
Treppendorf 30
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
20.08.2012

Table of contents
1 General notes............................................................................................................................................... 4
2 Safety instructions..................................................................................................................................... 7
3 Features....................................................................................................................................................... 12
4 Installation and starting up................................................................................................................ 13
5 Components and functions................................................................................................................ 16
6 Cleaning....................................................................................................................................................... 18
7 Technical specifications....................................................................................................................... 19
8 Protecting the environment.............................................................................................................. 20
Table of contents
LED Colour Flood 10W / 30W RGB
3

1 General notes
This user manual contains important information on safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to other users, be sure
that they also receive this manual.
Our products are subject to a process of continuous development. We therefore reserve the
right to make changes without notice.
This section provides an overview of the symbols and signal words used in this user manual.Symbols and signal words
General notes
LED floodlight
4

Signal word Meaning
DANGER! This combination of symbol and signal word
indicates an immediate dangerous situation
that will result in death or serious injury if it is
not avoided.
WARNING! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in death or serious injury if it is not
avoided.
NOTICE! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in material and environmental
damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
General notes
LED Colour Flood 10W / 30W RGB
5

Warning signs Type of danger
Warning – suspended load.
Warning – danger zone.
General notes
LED floodlight
6

2 Safety instructions
This device is intended to be used as an electronic illumination effect using LED technics. Use
the device only as described in this user manual. Any other use or use under other operating
conditions is considered to be improper and may result in personal injury or property damage.
No liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety
Safety instructions
LED Colour Flood 10W / 30W RGB
7

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
Safety instructions
LED floodlight
8

WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked flames.
Safety instructions
LED Colour Flood 10W / 30W RGB
9

NOTICE!
Voltage supply
Connect the device directly to the power grid. It must not be connected to a
dimmer.
Before connecting the device, you have to ensure that the rated voltage indicated
on the device matches the voltage of the power grid available in the operating
place. You must also take care that the power grid is protected by a residual cur‐
rent circuit breaker. Failure to do so can result in damage to the device and injury
to the user.
In case a thunderstorm is coming up or you're not going to use the device for a
longer period of time, disconnect it from the power grid to reduce the risk of elec‐
tric shock and fire.
NOTICE!
Risk of fire due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries.
Ensure that proper polarity is observed when inserting batteries.
Safety instructions
LED floodlight
10

NOTICE!
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device.
Take batteries out of the device if it is not going to be used for a longer period.
Safety instructions
LED Colour Flood 10W / 30W RGB
11

3 Features
The LED floodlight is ideal for professional lighting applications, for example, at events, on
stage, in theatres or discotheques
Special features of the device:
nInfrared remote control
nWhite, basic colours red, green, blue and mixed colours are selectable
nBuilt-in automatic show programmes
nSuitable for outdoor application due to protection type IP65
Features
LED floodlight
12

4 Installation and starting up
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the device against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
You can install the device on the wall, ceiling or floor. A mounting bracket is included in the
package.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Installation and starting up
LED Colour Flood 10W / 30W RGB
13

NOTICE!
Risk of overheating
The distance between the light output and the illuminated surface must be more
than 0.5 m (19.7 in).
Always ensure sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
The IR sensor for the remote control signals is firmly connected to the device with a separate
cable. Set up the receiver in such a way that there are no interfering objects between remote
and receiver.
Infrared sensor for the remote
control
Installation and starting up
LED floodlight
14

Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
Press the lock of the battery holder to the centre of the housing and pull out the battery holder
like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing
base of the remote control. Slide the battery holder back into the remote until it clicks into
place.
When shipping, the battery is already installed in the remote and protected against discharge
by a transparent plastic foil. Remove the plastic foil prior to first use.
Inserting the battery into the
remote control
Installation and starting up
LED Colour Flood 10W / 30W RGB
15

5 Components and functions
1[ON]/[OFF]
Buttons to switch the unit on or off.
2 Brightness control.
3 Colour selection buttons.
Use the
n[W] button for white light,
n[R], [G] or [B] button for the basic colours red, green and blue,
nthe coloured buttons to directly select a mixed colour.
4[FLASH]
Automatic change of all colours.
5[STROBE]
No function.
Remote control
Components and functions
LED floodlight
16

6[FADE]
Fast automatic change of all colours with blending effect.
7[SMOOTH]
Slow automatic change of all colours with blending effect.
Components and functions
LED Colour Flood 10W / 30W RGB
17

6 Cleaning
Clean the exterior of accessible optical lenses periodically to optimise light output. The fre‐
quency of cleaning depends on the operating environment: wet, smoky or particularly dirty
surroundings can cause more accumulation of dirt on the optics of the device.
nClean with a soft cloth using normal glass cleaning products.
nAlways dry the parts carefully.
Optical lenses
Cleaning
LED floodlight
18

7 Technical specifications
Item no. 274069 Item no. 274070
LED RGB multichip
10 W 30 W
Dispersion 120 °
Battery (remote control) Lithium coin battery, CR 2025, 3 V
Operating voltage supply AC 230 V , 50 Hz
Power consumption 16 W 35 W
Dimensions (W × D × H, without mounting
bracket) 113 mm × 86 mm × 86 mm 225 mm × 185 mm × 130 mm
Protection type IP65
Weight 0.9 kg 2.5 kg
Technical specifications
LED Colour Flood 10W / 30W RGB
19

8 Protecting the environment
For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that
they are collected for recycling. Please follow the notes and markings on the packaging.
This device is subject to the European directive 2002/96/EC.
Do not dispose of the device with your normal household waste.
Dispose of this device through an approved waste disposal firm or through your local waste
facility. When discarding the device, comply with the rules and regulations that apply in your
country. If in doubt, consult your local waste disposal facility.
Disposal of the packaging mate‐
rial
Disposal of your old device
Protecting the environment
LED floodlight
20