thomann fun genertion CL 105 A User manual

CL 105 A
active speaker
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
12.09.2018, ID: 437402 (V2)

Table of contents
1 General information................................................................................................................................. 4
1.1 Further information........................................................................................................................... 5
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 6
2 Safety instructions..................................................................................................................................... 8
3 Features....................................................................................................................................................... 13
4 Installation.................................................................................................................................................. 14
4.1 Tips on handling speakers............................................................................................................ 15
5 Connections and controls................................................................................................................... 16
6 Technical specications....................................................................................................................... 21
7 Plug and connection assignment.................................................................................................... 23
8 Protecting the environment.............................................................................................................. 26
Table of contents
CL 105 A
3

1 General information
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General information
active speaker
4

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
CL 105 A
5

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
General information
active speaker
6

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
General information
CL 105 A
7

2 Safety instructions
This device is intended to be used in a sound reinforcement system. This device is designed for
professional and not household use. Use the device only as described in this user manual. Any
other use or use under other operating conditions is considered to be improper and may result
in personal injury or property damage. No liability will be assumed for damages resulting from
improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
active speaker
8

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety instructions
CL 105 A
9

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or re. If in doubt, seek advice from a regis‐
tered electrician.
CAUTION!
Possible hearing damage
The device can produce volume levels that may cause temporary or permanent
hearing impairment. Over an extended period of time, even levels that seem to
be uncritical can cause hearing damage.
Decrease the volume level immediately if you experience ringing in your ears or
hearing impairment. If this is not possible, keep a greater distance or use su‐
cient ear protectors.
Safety instructions
active speaker
10

NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Safety instructions
CL 105 A
11

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
Safety instructions
active speaker
12

3 Features
Special features of the device:
n5" full-range driver
nBuilt-in 150 W class D power amp
n3-band equalizer
nMic / line and AUX inputs
nStandby function
nBluetooth and USB interface
Features
CL 105 A
13

4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
Create all connections while the device is o. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
NOTICE!
Possible property damage by magnetic elds
Loudspeakers produce a static magnetic eld. Therefore, maintain an appropriate
distance to devices that can be adversely aected or damaged by an external
magnetic eld.
Installation
active speaker
14

4.1 Tips on handling speakers
We recommend you to set up the speakers in a way, that the sound signals can reach the audi‐
ence unobstructedly. It will often be helpful to mount the speakers on tripods. Thus, the sound
will be evenly spread with maximum range throughout the audience area.
Always use high grade cable to connect your equipment. Otherwise you won't reach max‐
imum sound quality.
For optimum results both impedance and power handling of the speakers must match the
requirements of the amplier. Always follow the technical specications of the speakers! The
overall impedance of the connected loudspeakers must not deceed the minimum output
impedance of the amp. The amps max. RMS output power should be 50 % above the power
handling capacity of the connected speakers.
If you notice distortion during operation, either the amp or the speaker is overloaded. This may
permanently damage the amp or the speaker. Always reduce the volume when you hear dis‐
tortion.
Installation
CL 105 A
15

5 Connections and controls
Connections and controls
active speaker
16

1[Active/Standby]
This LED lights green during normal operation. If there is no signal input at the [MIC/GUITAR] jack for 30 minutes and
the standby function is activated, the device will enter standby mode and the LED lights red. As soon as the
[MIC/GUITAR] jack receives a signal again, the device switches automatically back to normal mode and the LED lights
green again.
2[BT Blue]
Indicator LED for the Bluetooth pairing The LED ashes when the Bluetooth function is enabled.
3[MAIN VOL]
Overall volume control
4[USB]
USB port
5[USB/BT]
Pushbutton for toggling between the USB and the Bluetooth input
6
A single press pauses playback. Another press continues playback.
Connections and controls
CL 105 A
17

7, 8 ,
Forward (skip to the next track) or backward (skip to the previous track)
9[MIC/GUITAR VOL]
Control to adjust the level for the instrument and microphone input
10 [LINE VOL]
Control to adjust the signal input line level
11,12,13 [HIGH], [MID], [LOW]
3-band EQ with high, mid and low frequency controls (boost / attenuation by ±12 dB
14 [GUITAR / MIC]
Toggles the sensitivity of the instrument and microphone input [MIC/GUITAR].
15 [MIC/GUITAR]
Instrument or microphone input, designed as 1/4" phone socket
16 [MIC]
Microphone input, designed as XLR chassis sockets
Connections and controls
active speaker
18

17, 18 [LINE R/L]
Line input, designed as pair of RCA sockets
19 [R/L 3.5mm]
Line input, designed as 3.5 mm phone socket
20 [STANDBY ENABLE | DISABLE]
When the switch is in the position [ENABLE], the device will turn o after approx. 30 minutes without input signal. To
turn it then back on again, switch [POWER] o an on again.
21 [MIC IN]
Microphone/line input, designed as XLR chassis socket
22 [LEVEL]
Toggles the input between the microphone level (pressed) and the line level (not pressed)
23 [THRU]
Output with line level for other audio devices
Connections and controls
CL 105 A
19

24 [POWER]
Main switch. Turns the device on and o
25 Plug for mains cable with fuse holder
If the fuse blows, replace it with a new fuse of the same type. You must rst disconnect the device from the power
supply.
Connections and controls
active speaker
20